The Milwaukee 48-13-3000 Ship Auger Bit Set is a 3-piece wood drilling set built for deep boring in clean lumber and nail-embedded wood. This is an auger bit set designed for drilling deep holes in wood for rough-in work, framing, and utility runs. Model 48-13-3000 includes three 18 inch ship auger bits in 1/2 inch, 3/4 inch, and 1 inch sizes, plus a storage pouch, giving you the most common large-hole sizes in one kit.

What makes this set matter on the job is how it handles real framing conditions. Milwaukee states these bits drill through up to 2X the nails of competitive auger bits without needing resharpening. The hardened one-face 20 degree rake-angle design gives the cutting edge better nail resistance while still staying easy to touch up when needed. If you are drilling stud bays, joists, posts, playground lumber, pier material, or landscape timbers, that kind of durability saves a lot of frustration.

The flutes are built for chip removal, which is a big deal on long auger bits. Wider flutes help pull chips out of the hole, and the polished, coated finish helps keep sap, glue, and wet debris from sticking. In plain terms, the bits stay moving instead of loading up and heating up halfway through a deep bore. That translates to cleaner wood drilling, less binding, and less time backing the bit out to clear chips.

Milwaukee also uses a through-center cutting design to create a more solid striking point against nails than offset cutting designs. That gives the bit a more controlled entry when it hits something ugly inside the wood. A double-wing spur design also continuously scribes the hole for smoother, splinter-free results, which helps when you need a cleaner pass-through for Romex wire, PEX water lines, bolts, rope, or rebar clearance in wood structures.

Each bit is 18 inches long, so this set is built for reach. That extra length helps when drilling through thick assemblies, boring overhead, or getting through multiple members without adding an extension. The shanks are impact-rated and use a hex style, so the bits are ready for heavy-torque drilling with compatible tools. They are also made for use with Milwaukee Super Hawg, Hole Hawg, and drill products, with a minimum chuck size requirement of 3/8 inch to 1/2 inch, so tool fit should be checked against your drill before purchase.

The Milwaukee 48-13-3000 Ship Auger Bit Set is best for electricians pulling wire, plumbers roughing in water lines, framers boring structural wood, and contractors working in renovation where hidden nails are common. If you need short finish-grade bits, this is not that set. If you need long, jobsite-tough auger bits that can keep boring through rough wood without constant cleanup, this is exactly the kind of kit you keep in the truck.

Milwaukee 48-13-3000 Ship Auger Bit Set is made for ugly wood

This is the kind of auger set you buy when clean lumber is not the reality and you need long-reach bits that can keep working in framing with nails, glue, and packed chips.

• Who it's for: Electricians, plumbers, framers, and remodelers drilling repeated deep holes through structural wood.
• Why it stands out: The 18 inch length, impact-rated hex shanks, chip-clearing coated flutes, and nail-resistant cutting design make it more jobsite-ready than basic wood-boring bits.
• Worth knowing: This is a focused rough-in set, not a full size range. You get the three common large-hole sizes, and you should verify your drill's chuck capacity before you put it to work.

• What material is this set designed to drill? Wood is the material application, including clean wood and nail-embedded wood.
• Are these bits impact-rated? Yes. The shanks are impact-rated and use a hex shank style.
• How long are the bits in this set? Each ship auger bit in the set is 18 inches long.
• What sizes are included? The set includes 1/2 inch, 3/4 inch, and 1 inch ship auger bits.