The Milwaukee 48-32-4207 SHOCKWAVE 6" Impact Duty Phillips #2 Power Driver Bits is a 10-piece screwdriver bit pack built for driving Phillips #2 fasteners with impact drivers and drill drivers. This is a screwdriver bit set designed for fastening in general-purpose jobsite work. Model Number: 48-32-4207. If you regularly run screws in framing hardware, sheet goods, fixtures, or metal-backed assemblies and need extra reach, this is the right kind of bit to keep in the bag.

The big selling point here is fit. Milwaukee calls out an Ultimate Fit tip with customized geometry, and that matters because a poorly fitting Phillips bit is what rounds out screws, slips off the head, and wastes time. A better-fitting Phillips #2 bit stays planted in the fastener, gives you better control at the start of the drive, and helps keep the screw head usable if you ever need to back it out later.

These bits are part of the SHOCKWAVE Impact Duty line, so they are made specifically for the higher torque and repeated hammering you get from an impact driver. The SHOCKZONE shank is optimized by tip type to absorb peak torque and help prevent breaking. In plain terms, that means the bit is designed to flex where it should instead of failing early when the tool hits hard. For anyone driving a lot of screws in a day, that translates into fewer broken bits and less downtime digging one out of the chuck.

The Wear Guard tip is there for long-term fit retention. Bit tips wear gradually, and once the tip starts to round over, the bit becomes harder to control and more likely to strip the screw. Milwaukee's heat treat and wear-focused tip design are intended to hold that fit longer, which is exactly what you want in an all-purpose fastening bit that sees repeated use across wood, metal, and mixed materials.

The 6 inch length is another practical advantage. Short bits are fine when access is wide open, but longer power bits help when you need to reach past hardware, into pockets, or around obstructions. That makes this style especially useful for cabinet installs, electrical boxes, mechanical access panels, metal framing connections, and general construction fastening where a standard insert bit comes up short.

The 1/4 inch hex shank keeps things simple. It fits standard impact driver and drill driver bit holders that accept 1/4 inch hex accessories, so there is no special interface to worry about. Laser-etched size markings also make it easier to grab the right bit from a pouch or organizer without second-guessing what is in your hand.

This bit set makes the most sense for contractors, installers, maintenance crews, and serious DIY users who burn through Phillips #2 bits and want something purpose-built for impact work. If you mainly drive common jobsite screws and want longer reach, better screw engagement, and improved durability over basic driver bits, this Milwaukee set earns its spot.

Milwaukee 48-32-4207 SHOCKWAVE 6" Impact Duty Phillips #2 Power Driver Bits for the screws you drive all day

This is the kind of bit pack that makes sense when Phillips #2 screws are part of your weekly routine and you want longer reach without giving up impact-rated durability.

• Who it's for: Pros and serious DIY users running impact drivers for general fastening, install work, and service calls.
• Why it stands out: The combination of a 6 inch length, SHOCKZONE torque absorption, and wear-focused tip design gives you a more useful bit than a basic long Phillips bit.
• Worth knowing: This is a specialized 10-pack of Phillips #2 bits, not a mixed set, so it is best for users who know they go through this tip size regularly.

• Are these bits made for impact drivers? Yes. Milwaukee specifies that they are designed for use with impact drivers and drill drivers.
• What shank do these bits use? They use a 1/4 in hex shank, which fits standard quick-change bit holders and many drill driver chucks.
• What screw type do they fit? These are Phillips #2 power driver bits.
• Are these short insert bits? No. Each bit is 6 inches long for added reach.