Mirka Gold 60 Ft. x 2-3/4 Inch P80 Grit Sanding Roll is a roll-format abrasive for users who need dependable stock removal and consistent sanding across a wide range of materials. This is a sanding roll designed for high-speed sanding, surface prep, and material removal. Model Number: 23-574-080. If you do automotive prep, wood sanding, paint removal, or filler work, this roll gives you coarse cutting action in a length you can size to the job.

The big story here is how the abrasive stays useful longer. Mirka uses aluminum oxide grain for a strong, long-lasting cut, and the grain distribution is optimized to keep the roll cutting efficiently instead of fading fast. In practical terms, that means less time fighting dull paper and fewer interruptions when you are sanding larger surfaces or working through repeated prep steps.

Mirka Gold abrasives are known for balancing aggressive cutting with control, and that matters on real work. The P80 grit is coarse enough for heavier sanding tasks like knocking down body filler, removing old paint, leveling primer, or roughing wood surfaces before moving to finer grits. It is not a finish grit. It is the stage where you want speed, bite, and predictable scratch pattern development before the next sanding step.

The semi-open coat and special stearate coating are worth paying attention to because they directly affect performance. Those features are there to reduce clogging and loading, especially when sanding materials that like to gum up abrasives. If you have ever burned through paper too quickly on paint, filler, resinous wood, or similar surfaces, you already know why this matters. Cleaner abrasive means more usable life and more consistent cut quality.

The 2-3/4 inch width and 60 foot roll format make this a practical shop product, not just a one-off consumable. You can cut exactly what you need instead of opening a new sheet every time. That makes it useful for hand sanding blocks, sheet sander setups that match the size, and bench stock for body shop, woodworking, and general prep work where the same abrasive size gets used all day.

Material range is another strong point. Based on the available product data, this Mirka sanding roll is suitable for copper alloys, brass, bronze, non-ferrous metal, paint removal, plaster, filler, glass fiber, synthetic materials, chipboard, veneer, plastics, primer, body filler, hardwood, soft or resinous wood, and lacquers. That kind of range is why Mirka Gold stays popular in mixed-material environments where one abrasive line has to cover more than one task.

Who should buy it? This sanding roll makes the most sense for automotive refinishing users, woodworkers, cabinet and trim shops, marine repair work, and serious DIY users who go through abrasives fast enough to benefit from roll stock. If you want a coarse sanding roll that cuts hard, resists clogging, and gives you the flexibility to tear off custom lengths, this is the kind of consumable that earns its spot on the bench.

Mirka Gold 60 Ft. x 2-3/4 Inch P80 Grit Sanding Roll is the kind of shop stock you keep close

This is a smart buy for anyone who burns through coarse abrasive and wants a roll that cuts fast without loading up too quickly.

• Who it's for: Body shop techs, woodworkers, marine repair users, painters doing prep, and serious DIYers who need bulk sanding material instead of single sheets.
• Why it stands out: The aluminum oxide grain, semi-open coat, and stearate treatment all work toward the same goal: longer useful life and more consistent cutting on messy materials.
• Worth knowing: P80 is a coarse grit, so this is your shaping and prep stage, not your finish pass. Plan on stepping up through finer grits after the heavy work is done.

• What grit is this sanding roll? It is P80 grit, which is a coarse abrasive intended for faster stock removal and surface prep.
• What is the abrasive made from? This roll uses aluminum oxide abrasive material.
• What materials can it be used on? Based on the product data, it is suitable for wood, non-ferrous metal, primer, paint, lacquers, body filler, plaster, plastics, chipboard, veneer, glass fiber, and similar prep materials.
• How large is the roll? The roll is 2-3/4 inches wide and 60 feet long, which is also listed as 20 yards.