The Powermatic Tailstock Swing Away for Model 3520 and 2020 Lathes (6294721) is a lathe accessory built to move and park your tailstock off to the side instead of lifting it off the machine. This is a lathe tailstock swing away designed for woodturning access and tailstock storage. Model Number: 6294721. If you turn bowls, hollow forms, or other work where the tailstock is useful one minute and in the way the next, this accessory solves a real shop problem.

The main advantage here is simple: you do not have to wrestle a heavy tailstock every time you need clearance. Slide the tailstock onto the swing away, lock it down, unlock the unit, and move the tailstock out of the working zone with much less effort than lifting it off by hand. For anyone spending long hours at the lathe, that means less strain, faster transitions, and a smoother workflow when switching between supported turning and open-face work.

Powermatic designed this accessory specifically around its larger wood lathes, and that matters. Fit is called out for the 3520, 3520A, 3520B, 3520C, and PM2020 platforms, so this is not a generic bracket trying to work across unrelated machines. It locks to the lathe bed with a few turns of the handle, which keeps the setup straightforward and practical for regular use in a working shop.

Build-wise, this is a steel accessory with a listed product weight of 17.5 lbs, so it is not a flimsy add-on. The weight and steel construction point to a piece meant to support the job rather than feel like an afterthought. That is important on a lathe accessory where alignment, stability, and repeatable movement matter more than flashy design.

In day-to-day use, the real value is better access around the spindle and more room where your body and tools need to be. Moving the tailstock out of the way helps when turning larger bowls or working in positions where the tailstock body can crowd your handle path. Powermatic also states that it does not interfere with a bed extension mounted in the lower position, which is a useful detail for shops running that configuration.

There is one fit note worth knowing before you buy: the tailstock swing away cannot be mounted to the end of a bed extension. That is not a flaw, just an installation limit you need to plan around. If your lathe is set up on the main bed and your goal is faster tailstock removal without actual lifting, this accessory makes a lot of sense.

This is a good fit for serious woodturners, furniture makers, bowl turners, and small production shops using compatible Powermatic lathes. If you rarely move the tailstock, you may not need it. But if your turning work constantly shifts between supported and unsupported operations, this accessory saves effort every single session.

Powermatic Tailstock Swing Away for Model 3520 and 2020 Lathes is the kind of upgrade you appreciate every time you turn

If your tailstock is always in the way but too heavy to keep pulling off, this is the clean fix.

• Who it's for: Woodturners running compatible Powermatic 3520-series or PM2020 lathes who regularly switch between tailstock support and open turning space.
• Why it stands out: It solves a real annoyance, keeps the tailstock with the machine, and gives you quicker access without the awkward lift-and-store routine.
• Worth knowing: Make sure your machine setup matches the mounting requirements. It works with a lower bed extension position, but it does not mount to the end of a bed extension.

• What lathes does this fit? It is listed for Powermatic 3520, 3520A, 3520B, 3520C, and PM2020 lathes.
• Does it work with a bed extension? Yes, it does not interfere with a bed extension mounted in the lower position. It cannot be mounted to the end of a bed extension.
• What is it made from? The product is listed as steel.
• How much does it weigh? The listed product weight is 17.5 lbs.