Shop Fox Planer Pal®, Standard, Pair (W1216A)
Shop Fox Planer Pal®, Standard, Pair (W1216A)
In Stock - Ships from Manufacturer
Product Details
Product Details
Key Features
Overview
The Shop Fox W1216A Planer Pal Standard Pair is a magnetic planer knife setting jig for aligning planer knives on standard cutterheads. This is a planer knife setting jig designed for setting and adjusting HSS planer knives accurately on 12 inch to 20 inch planers. Model W1216A gives you a simpler way to hold knives in position while you tighten them, which matters when you want straight setup without fighting the blade by hand.
What makes this tool useful is not just that it holds the knife, but that it helps you repeat the same setting across the cutterhead. The stated accuracy is plus or minus 0.002 inch, which is the difference between a planer that cuts clean and one that leaves lines because the knives are not matched. If you change knives often, maintain older machines, or do your own setup instead of farming it out, that kind of consistency saves time and wasted stock.
The design is straightforward in a good way. Each jig uses powerful neodymium magnets to grip HSS knives and keep them where you want them while you tighten the gib. That frees both hands for the work that actually matters. Instead of trying to balance a knife, check height, and tighten at the same time, you can focus on getting the knife seated and locked down correctly.
The standard version is sized for 2-1/2 inch to 4 inch diameter cutterheads, which puts it in the sweet spot for many stationary planers. Two jigs are needed for 15 inch to 20 inch planers, and that is exactly what this pair gives you. For planers over 20 inches, the manufacturer states that three jigs are needed. For 12 inch and smaller planers with 1-7/8 inch to 2-1/8 inch cutterheads, this is not the right size and the Mini Planer Pal is the correct match instead.
Another practical advantage is that the system lets you shift nicked knives slightly to get back to a clean cut. On the job or in the shop, that can buy you more usable life from a set of knives before you sharpen or replace them. That is a real-world benefit, especially for woodworkers and small shops trying to keep machines productive without burning time on unnecessary knife changes.
Material and construction are simple and durable. The listed base material is alloy steel, and the tool itself is hand powered, so there is nothing electronic to fail and no learning curve beyond understanding your planer cutterhead. This is a setup aid, not another machine to maintain. If you already know how to change planer knives but want a cleaner, more repeatable process, that is exactly where it fits.
The best buyer for the Shop Fox W1216A Planer Pal Standard Pair is the woodworker, cabinet shop, millwork shop, school shop, or serious home user who services their own planer knives and wants better results without overcomplicating the process. If your machine takes HSS knives and has a 2-1/2 inch to 4 inch cutterhead, this is a practical upgrade that helps make knife changes faster, more controlled, and more consistent.
More Control During Knife Setup
Knife changes go smoother when the jig is doing the holding and you are doing the adjustment. That means less fumbling at the cutterhead and a better shot at getting the knife set where it belongs the first time.
- Designed to hold planer knives in position while you tighten the gib
- Frees both hands for adjustment and fastening
- Built for accurate knife alignment with stated accuracy of plus or minus 0.002 inch
Strong Magnetic Hold Without Extra Fuss
The magnetic hold is the whole point here. It keeps the HSS knife where you set it so you can stop fighting the blade and focus on getting even height across the cutterhead.
- Uses powerful neodymium magnets
- Intended for use with HSS knives
- Hand-powered design with no batteries, charger, or moving parts to maintain
Right Size for Standard Planer Cutterheads
This standard version is sized for the planer range many shops actually use. If you have a 15 inch to 20 inch planer with the right cutterhead diameter, the included pair is the setup the manufacturer calls for.
- Fits 2-1/2 inch to 4 inch diameter cutterheads
- Two jigs are needed for 15 inch to 20 inch planers
- For planers over 20 inches, the manufacturer recommends three jigs
Simple Tool, Useful Shop Upgrade
This is the kind of accessory that earns its keep every time knives need attention. It is not flashy, but it helps make one of the more annoying maintenance jobs more predictable.
- Alloy steel construction
- Helps shift nicked knives slightly to restore cut quality
- Compact setup aid for planer maintenance and knife changes
What's in the Box
- (2) Planer Pal standard magnetic knife setting jigs
Key Specifications
| Model Number | W1216A |
|---|---|
| Tool Type | Planer knife setting jig |
| Cutterhead Diameter Compatibility | 2-1/2 in to 4 in |
| Knife Compatibility | HSS knives |
| Accuracy | ±0.002 in |
| Material | Alloy steel |
| Power Source | Hand powered |
| Weight (lbs) | 1.7 lbs |
Compatibility
Built For
Pro Tip
If a planer knife has a small nick, try shifting the knife slightly across the cutterhead before replacing it. That is one of the practical advantages of the Planer Pal system, and it can get you back to a clean finish without burning a full knife change right away.
Tool Nut's Take
Shop Fox W1216A Planer Pal Standard Pair Keeps Knife Changes From Turning Into A Headache
This is a simple shop accessory that solves a very real problem: getting planer knives set evenly without a bunch of trial and error.
- Who it's for: Woodworkers and shop owners running 15 inch to 20 inch planers with HSS knives and standard 2-1/2 inch to 4 inch cutterheads.
- Why it stands out: The magnetic hold, repeatable alignment, and ability to shift nicked knives make it more than just a holder. It is a real time-saver for planer maintenance.
- Worth knowing: This pair is the right setup for 15 inch to 20 inch planers, but larger planers need three jigs, and smaller 12 inch machines with smaller cutterheads need the Mini version instead.
Common Questions
- What does the Shop Fox W1216A Planer Pal Standard Pair do? It is a magnetic planer knife setting jig used to hold and align HSS planer knives while you tighten them in the cutterhead.
- What cutterhead sizes does it fit? It is designed for cutterheads from 2-1/2 inches to 4 inches in diameter.
- How accurate is it? The manufacturer states accuracy of plus or minus 0.002 inch.
- Is this the right set for a 15 inch to 20 inch planer? Yes. The manufacturer states that two jigs are needed for 15 inch to 20 inch planers, and this product is a pair.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


