The Simpson Strong-Tie LUS210 Face-Mount Joist Hanger is a light face-mount hanger for connecting a 2x10 joist to a header in wood-framed construction. This is a face-mount joist hanger designed for wood-to-wood joist support and framing connections. Model Number LUS210. If you are building a deck, floor system, addition, or general framing project and need a connector that installs quickly without giving up load performance, this is the kind of hardware you reach for.

What matters most here is the double-shear nailing design. Instead of treating the hanger like just another piece of bent metal, Simpson designed the LUS series so the joist nails work through two points for better load distribution. In real use, that means a stronger connection with fewer nails than older hanger styles, plus faster installation when you are repeating the same connection across a run of framing.

The LUS210 also uses speed prongs to temporarily hold the hanger in place. That sounds small until you are on a ladder, working off a beam, or trying to keep your layout moving. You can set the hanger, let the prongs help position it, and then finish fastening. It is a simple feature, but it cuts the usual fumbling that slows down framing hardware installs.

For this specific model, Simpson lists an 18-gauge construction, a width of 1 9/16 in., a height of 7 13/16 in., and a seat depth of 1 3/4 in.. The finish is Zinc Galvanized, G90. Those details matter because they tell you this hanger is built for standard interior or typical protected framing conditions where a galvanized wood connector is appropriate. If your job calls for a more aggressive corrosion-resistant coating or stainless, that is when you step into other LUS variants, not this exact SKU.

The Simpson Strong-Tie LUS210 Face-Mount Joist Hanger is also a code-focused connector, not a bend-it-to-fit part. Simpson specifically notes that LUS hangers are tested, load rated, and code compliant, and that they cannot be modified. That is worth saying plainly: this is not jobsite hardware you tweak with a hammer to make it work. If the framing condition changes, use the right connector instead of forcing the wrong one.

On installation, Simpson calls out that all specified fasteners must be used and that joist nails must be driven at an angle through the joist or truss into the header to achieve table loads. That is the difference between just attaching a hanger and actually getting the rated performance from it. The connector is designed to work as part of a system that includes the proper fastening pattern.

Who is this for? Carpenters, deck builders, remodelers, and serious DIY users working on wood framing. If you need a common-size joist hanger that is economical, quick to place, and backed by a tested design, the LUS210 makes sense. If you need something adjustable, sloped, skewed, or intended for field modification, this is not that product.

Simpson Strong-Tie LUS210 Face-Mount Joist Hanger Gets the Basics Right

This is a dependable framing connector for builders who want a common-size hanger that installs fast and does not cut corners on structural intent.

• Who it's for: Deck builders, framers, remodelers, and serious DIY users making wood-to-wood joist connections.
• Why it stands out: The double-shear nailing design and speed prongs make this hanger quicker to place and stronger than bargain hardware that is just stamped metal with holes.
• Worth knowing: This connector is not meant to be modified. If your framing condition is skewed, sloped, or otherwise non-standard, buy the right hanger instead of trying to make this one do a job it was not designed for.

• What is the LUS210 used for? It is a face-mount joist hanger used to support and connect a 2x10 wood joist to a wood header in framing applications.
• Can this hanger be bent or modified on site? No. Simpson states that LUS-series hangers cannot be modified.
• Is the Simpson Strong-Tie LUS210 Face-Mount Joist Hanger code compliant? Yes. Simpson states that LUS-series hangers are tested, load rated, and code compliant when installed as specified.
• What helps make installation faster? The built-in speed prongs temporarily position and secure the connector before full fastening.