The Stabila 07410 Laser Mount for Batter Boards and Forms (Model Number: 07410) is a laser mounting accessory built to clamp and screw onto batter boards and concrete forms for layout and alignment work. This is a laser mount designed for proper mounting of lasers on batter boards and forms.

When you are setting lines for footings, walls, or formwork, the biggest headache is keeping the laser stable and exactly where you set it. This mount is made for that job: the instrument holder uses a flexible guide rail so you can position the laser quickly, then keep it locked in place once it is aligned.

Adjustment is the whole point here. The holder can rotate through 360 degrees for aiming, and it gives you 2.5 inches of adjustment to dial in position without moving the whole setup. That saves time when you are chasing a mark across a board line or shifting a reference point on forms.

The mount is also built to handle different mounting needs on-site. You can position the instrument centrally on the batter board holder, or go off-center using the rotary plate and guide rail. That off-center option matters when the "perfect" spot is blocked by bracing, rebar, or form hardware.

Stabila uses metal construction for the holder, rotary plate, and guide rail. The rotary plate is removable, so attaching and removing the device is quick and simple when you are moving station to station during layout.

For fit, the batter board holder attaches with four screws and is designed for boards up to 3.25 inches thick. The connection to the instrument is a 5/8 inch to 11 threaded screw, which is the standard mount size for many rotation lasers and theodolites. It is also listed as compatible with rotary and line lasers.

Stabila 07410 Laser Mount for Batter Boards and Forms: the right way to mount a laser on form boards

If you do layout on batter boards or forms, this mount is a clean, purpose-built way to keep your laser stable and adjustable where it actually needs to be.

• Who it's for: Concrete and foundation crews, site layout, and anyone running rotary or line lasers off batter boards and forms.
• Why it stands out: All-metal build, 360 degree rotation, and a guide rail that lets you position fast and fine-tune without moving the whole mount.
• Worth knowing: It is designed to screw down and hold tight, so plan on mounting it where you want it and letting it do its job.

• What thread size does the mount use? It uses a 5/8 inch to 11 threaded screw connection.
• How thick of a batter board or form can it attach to? It is designed to attach to boards up to 3.25 inches thick.
• What type of lasers is it compatible with? It is listed as compatible with rotary and line lasers.