• Replacement Abrasive Conveyor Belt for the ShopPro 25, 22-44 Pro, Performax 25x2 w/ 1" rollers Drum Sanders
• *For use with machines manufactured prior to 1995 (Sanders with 1in rollers)

After the depth of cut has been determined, selecting the proper feed rate is essential. For finish sanding the best finish is usually achieved with a slow to moderate feed rate. This allows for the most revolutions of the drum per inch of sanding. Faster feed rates can be used as long as the machine is not over-stressed.

When finish sanding with grits finer than 80, the best finish can usually be obtained if INTELLISAND does not engage. If INTELLISAND does slow the conveyor when finish sanding, it is best to make another sanding pass without changing the thickness setting and sand again.

22 V1 – Works with ShopPro 25, 22-44 Pro & Performax 25×2 w/1″ rollers