• *For use with machines manufactured after 1995 (Sanders with 2in rollers), older machines require the supmx-60-0321

After the depth of cut has been determined, selecting the proper feed rate is essential. For finish sanding the best finish is usually achieved with a slow to moderate feed rate. This allows for the most revolutions of the drum per inch of sanding. Faster feed rates can be used as long as the machine is not over-stressed.

When finish sanding with grits finer than 80, the best finish can usually be obtained if INTELLISAND does not engage. If INTELLISAND does slow the conveyor when finish sanding, it is best to make another sanding pass without changing the thickness setting and sand again.

24 – Works with 25″ Bed, 2″ Rollers

*For use with machines manufactured after 1995 (Sanders with 2in rollers), older machines require the supmx-60-0321