The Triton TRA001 3-1/4 HP Dual Mode Precision Plunge Router is a corded plunge router built for serious woodworking, heavy profiling, and router table use. Model Number: TRA001. This is a plunge router designed for handheld edge work, joinery, template routing, and table-mounted routing. If you want one router that can handle large cutters, accurate depth setting, and above-table adjustment, this is the kind of machine you look at.

The big draw here is the dual-mode design. You can use it as a conventional plunge router, then switch to fixed-base style rack-and-pinion height adjustment when the job calls for more controlled setting changes. In practical terms, that means cleaner setup for repeated cuts and less fighting the tool when you need exact depth on hardwood, joinery, or pattern work.

The motor is rated at 3.25 horsepower with a 15 amp draw, and the speed range runs from 8,000 to 21,000 RPM. That matters because larger router bits need lower speed, while smaller cutters and finish work benefit from higher speed. Instead of treating every cut the same, this router gives you the range to match bit size and material more intelligently.

Depth control is where the TRA001 separates itself from a lot of basic routers. The micro winder allows continuous fine depth adjustment through the full plunge range, and the 3-stage turret with direct-reading scales helps when you need repeatable preset depths. For dados, mortises, inlays, and stepped passes, that saves time and helps avoid cutting too much on the first shot.

This router is also built with table use in mind. It has above-table height adjustment, and Triton designed the unit so you do not need an expensive separate lift mechanism for many router table setups. The removable plunge spring further helps when table mounted, making height changes and bit setup easier than on many standard plunge routers.

Bit changes are more straightforward than on routers that force awkward wrench access. The TRA001 uses through-base access with automatic spindle lock for single-wrench bit changes. That is a real convenience when you are swapping between round-over, straight, flush-trim, and panel-raising bits during the same project.

The router accepts both 1/4 inch and 1/2 inch collets, which broadens your bit choices without needing a second machine just for smaller profiles. The included multi-function fence adds more control for handheld work and circle cutting, so this is not just a table router pretending to be versatile. It is meant to cover a lot of ground in one package.

This Triton plunge router makes the most sense for woodworkers, cabinet installers, trim carpenters, furniture builders, and advanced DIY users who need more than a light-duty trim router can deliver. If most of your work is edge easing on small stock, it is probably more router than you need. If you want a powerful corded router that can live in a table and still earn its keep by hand, it is a strong fit.

Why the Triton TRA001 3-1/4 HP Dual Mode Precision Plunge Router Still Gets Serious Attention

This is a heavy-duty woodworking router that earns its spot when you need power, precise depth control, and genuine router table friendliness in one corded platform.

• Who it's for: Woodworkers, trim carpenters, cabinet builders, and advanced DIY users who want one full-size router for handheld work and table-mounted work.
• Why it stands out: Dual-mode operation, above-table adjustment, through-base bit changes, and both 1/4 inch and 1/2 inch collets make it a lot more versatile than a basic plunge router.
• Worth knowing: At nearly 14 pounds, this is not a light trim router. That weight is part of the deal when you step up to a 3.25 horsepower machine built for bigger bits and more demanding cuts.

• What type of router is this? It is a corded plunge router with dual-mode operation that also supports fixed-base style rack-and-pinion height adjustment.
• What collet sizes does it use? The TRA001 accepts both 1/4 inch and 1/2 inch router bits.
• Can it be used in a router table? Yes. It has above-table height adjustment, and the router is designed to work well in table-mounted applications.
• What is the speed range? The variable-speed motor runs from 8,000 to 21,000 RPM.