This bundle pairs the Vessel 220USB1U e-ASSIST Screwdriver, Higher Torque Model with the Vessel IB11P02U Impact Ball 11-Piece Impact Driver Bit Set and the Vessel 2200MBH120K01 BALL GRIP Interchangeable Ratchet Screwdriver — a powered driver, an impact-ready bit set, and a manual ratchet driver together in one kit. Model Numbers: 220USB1U (USB-rechargeable e-ASSIST driver, Higher Torque), IB11P02U (11-piece impact driver bit set in pop-up case), 2200MBH120K01 (36-tooth ratchet screwdriver with 10-bit set).

The 220USB1U is a hybrid electric/manual driver: its motor delivers 17.7 in-lbs (2.0 N·m) at 280 rpm no-load speed for fast repetitive tightening, then switches to manual mode for up to 88.5 in-lbs (10 N·m) of hand torque on the final turns — rated for fasteners up to M6. It runs on a built-in 3.6V, 800mAh Li-ion cell that recharges over any USB port via the included micro-USB cable, and it has a built-in LED that lights the fastener as you drive. It ships with a (+)2 Impact Ball Torsion Bit, 3-9/16" (90 mm).

The 2200MBH120K01 is a manual ratcheting screwdriver built around a 36-tooth internal ratchet, so you can keep the bit engaged and drive with short wrist movements instead of full handle resets. Its ball-grip handle detaches to convert the tool into a compact stubby driver for tight clearances, and its SUS bit holder uses a rare-earth magnet to keep bits seated. It includes 10 bits (slotted, Phillips, square, and Torx) in a BITSBELT holder, all on a standard 1/4-inch hex interface.

The IB11P02U rounds the kit out with 11 more impact-rated bits in a compact pop-up case — a slotted bit, three Phillips bits, a square bit, five Torx bits, and a 2" (50 mm) bit holder, all rated at 62 HRC hardness and built with a torsion zone to absorb shock from impact driver use.

Together this kit covers three ways of driving a fastener — electric-assist for speed, manual ratchet for feel and tight spots, and impact-rated bits for use in a cordless impact driver — on a shared 1/4-inch hex bit standard. It's a fit for electronics techs, installers, maintenance crews, and any DIYer who wants a complete small-fastener kit without piecing one together themselves.

A Complete Small-Fastener Kit — Powered, Ratchet, and Impact

Instead of picking one driving method, this bundle gives you all three in a shared bit standard, so whatever the job calls for, you've already got the right tool in hand.

• Who it's for: Electronics techs, installers, maintenance crews, and DIYers who want a powered driver, a manual ratchet driver, and an impact-ready bit set together instead of assembling one piecemeal.
• Why it stands out: All three pieces share a 1/4 in. hex bit interface, so the 21 included bits work across the ratchet driver, the e-ASSIST driver, and any compatible impact driver you already own.
• Worth knowing: The e-ASSIST driver's electric assist tops out at M6 fasteners and 17.7 in-lbs (2.0 N·m) — it's built for repetitive small-fastener speed, not as a substitute for a cordless drill/driver or impact wrench on larger fasteners; the ratchet driver and IB11P02U bits are manual/impact accessories, not electric tools.

• Do all the bits in this kit fit each other's tools? Yes — the e-ASSIST driver, the ratchet screwdriver, and the IB11P02U set all use the standard 1/4" (6.35 mm) hex shank interface.
• Can I use the IB11P02U bits in a cordless impact driver? Yes, they're torsion-designed and marked for impact driver use. The e-ASSIST and ratchet drivers included in this kit are not impact drivers themselves.
• Does the e-ASSIST driver need a separate charger? No — it charges over any standard USB port using the included micro-USB cable.
• What's the difference between this kit and the VesselBundle-Speed kit? This kit includes the 220USB1U Higher Torque e-ASSIST driver; VesselBundle-Speed swaps in the 220USBS1U Higher-Speed e-ASSIST driver instead. The ratchet screwdriver and bit set are the same in both.