Vessel 220USB1U "Power Promotion" e-Assist USB Rechargeable Screwdriver with 11-Piece Bit Set + Ball Grip Holder (WINTER2025-POWER)
Vessel 220USB1U "Power Promotion" e-Assist USB Rechargeable Screwdriver with 11-Piece Bit Set + Ball Grip Holder (WINTER2025-POWER)
SOLD OUT
Product Details
Product Details
Key Features
Overview
The Vessel 220USB1U "Power Promotion" e-Assist USB Rechargeable Screwdriver w/ 11-Pc Bit Set + Ball Grip Holder is a bundle built around Vessel's hybrid electric and manual screwdriver. This is a USB rechargeable screwdriver designed for fast, repetitive driving of small and medium screws, with a full bit set and a pocket bit holder included. SKU WINTER2025-POWER combines the Vessel 220USB1U e-ASSIST screwdriver, the Vessel IB11P02U Impact Ball 11-piece bit set, and a Ball Grip carrying bit holder in a mystery color.
The driver works two ways. Slide the switch and the motor turns the bit at 280 RPM with 17.7 in-lbs (2.0 N·m) of torque, enough to run screws down quickly on cabinet hardware, switch plates, enclosures, and furniture assembly. When the screw gets close, stop the motor and turn the handle by hand. The ball-shaped grip lets you put up to 88.5 in-lbs (10 N·m) into the final turn. That split is the whole point: the motor saves your wrist on the long part of the job, and your hand controls the part where heads strip and threads strip out.
This is not an impact driver, and Vessel is clear about that. The motor is for running screws in and out, not for final tightening. Use it that way and you avoid the cam-out and over-torquing that a cordless drill causes on small fasteners. Vessel rates the 220USB1U for screws up to M6. It is the Higher Torque model in the Vessel e-ASSIST line.
Power comes from a built-in 3.6V, 800 mAh lithium-ion battery that charges through a micro-USB port on the handle, with a charging indicator to show status. A high-brightness LED lights the screw head, which helps inside cabinets, panels, and appliance housings. At 5.5" long with a slim body, it fits in a tool bag or drawer where a cordless drill would not. The driver accepts standard 1/4" hex bits and is made in Japan.
The IB11P02U bit set covers the screw heads you run into every day: a 6 mm slotted bit, Phillips #1, #2, and #3, a Square #2, and Torx T10, T15, T20, T25, and T30, plus a 2" (50 mm) bit holder for extra reach. The bits are 1-3/16" (30 mm) long and made from Vessel's VoHA alloy steel at 62 HRC hardness. A torsion zone in each bit absorbs shock, and the set is rated for impact drivers, so the same bits move from the e-ASSIST to your impact without worry. They store in a compact pop-up case.
The Vessel Ball Grip carrying bit holder completes the kit as a keyring-size stubby driver. It holds a 1/4" hex bit with a one-hand, one-push release and gives you enough grip to drive or back out a screw where nothing else fits. The color is a surprise; function is the same across colors.
Who should buy it? Electricians, HVAC and appliance techs, cabinet and furniture installers, and anyone who drives a lot of small screws by hand. If you are tired of choosing between a slow manual screwdriver and a drill that strips everything, this bundle is a smart, inexpensive answer.
Fast In, Controlled Finish
Run the screw down with the motor, then finish by hand. You get speed without the stripped heads a drill leaves on small fasteners.
- 17.7 in-lbs (2.0 N·m) electric torque at 280 RPM
- Up to 88.5 in-lbs (10 N·m) by hand
The Common Screw Heads, Covered
Ten bits and a holder in a case that fits in a pocket. The torsion design and 62 HRC hardness hold up in an impact driver too.
- Slotted, Phillips, Square, and Torx bits
- 1-3/16" (30 mm) bits plus a 2" (50 mm) holder
A Driver on Your Keyring
Keep your most-used bit on a keyring and you always have a stubby driver for a quick adjustment.
- Holds 1/4" hex bits
- One-hand, one-push bit release
What's in the Box
- (1) Vessel 220USB1U e-ASSIST USB rechargeable screwdriver
- (1) Vessel IB11P02U Impact Ball 11-piece bit set in pop-up case: 6 mm slotted; Phillips #1, #2, #3; Square #2; Torx T10, T15, T20, T25, T30; 2" (50 mm) bit holder
- (1) Vessel Ball Grip carrying bit holder (mystery color)
Key Specifications
|
|
17.7 in-lbs (2.0 N·m) |
|---|---|
|
|
88.5 in-lbs (10 N·m) |
|
|
280 RPM |
|
|
3.6V, 800 mAh built-in lithium-ion |
|
|
Micro-USB (Type B) port |
|
|
1/4" hex |
|
|
5.5" |
|
|
High-brightness LED |
|
|
62 HRC |
|
|
Japan |
Compatibility
Built For
Pro Tip
Stop the motor a turn or two before the screw seats, then finish by hand. Don't use the motor to snug the screw down. That's what the ball grip is for, and it keeps you from stripping small screws in plastic or sheet metal.
Tool Nut's Take
The Vessel 220USB1U e-Assist USB Rechargeable Screwdriver Bundle Is the Screwdriver Techs Keep Reaching For
It drives like a cordless tool and finishes like a hand screwdriver, and this bundle adds the bits and holder you would buy anyway.
- Who it's for: Electricians, service techs, installers, and anyone driving lots of small screws who is tired of stripping them with a drill.
- Why it stands out: Hybrid electric and manual drive, USB charging, made in Japan, plus impact-rated bits at 62 HRC.
- Worth knowing: Electric torque is light at 17.7 in-lbs (2.0 N·m) and the driver is rated to M6 screws. It does not replace a drill or impact driver on lag screws or structural fasteners.
Common Questions
- Is the 220USB1U an impact driver? No. It is a powered screwdriver with a manual mode. Use the motor to run screws in and out and do the final tightening by hand.
- How does it charge? Through a micro-USB port on the handle, from any standard USB power source. The battery is built in, not swappable.
- Can I use the included bits in my impact driver? Yes. The IB11P02U Impact Ball bits are rated for impact driver use.
- What color is the bit holder? The Ball Grip holder ships in a mystery color. Color varies; function is the same.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

