Vessel 9806JSPB MEGADORA JISDRIVE Screwdriver 6-Piece Set (9806JSPB)
Vessel 9806JSPB MEGADORA JISDRIVE Screwdriver 6-Piece Set (9806JSPB)
Out of Stock - Available to Order
Product Details
Product Details
Key Features
Overview
This is a 6-piece Phillips screwdriver set designed to cover the full range of everyday sizes while also handling stuck and JIS-spec fasteners. The Vessel 9806JSPB Megadora JISDRIVE Screwdriver 6-Piece Set includes #0, #1 (two drivers), #2 (two drivers), and #3 Phillips tips, giving you a size for nearly any fastener without swapping bits or hunting for a single driver in a toolbox.
The set isn't just a size run — it mixes driver platforms to match the task. Two of the six drivers carry Vessel's Impacta tang-thru shank and steel strike cap: hit the cap with a hammer and a cam rotation mechanism turns the blade 12° counterclockwise, applying rotational torque to a stuck, rusted, or distorted screw at the moment of impact. Other drivers in the set add a forged hexagonal bolster for extra wrenching leverage with pliers or a wrench, or a knurled blade section for quicker, slip-resistant hand-turning on standard fasteners.
Every driver in the set uses Vessel's JISDRIVE tip geometry — a Phillips profile machined to Vessel's own spec rather than a generic stamped tip, built to seat properly in both standard Phillips and Japanese Industrial Standard (JIS) screw heads. That matters on Japanese-spec vehicles, motorcycles, electronics, and imported equipment where a standard Phillips driver tends to cam out and round the fastener.
This is a practical bench or truck-box set for anyone who needs full Phillips coverage plus the ability to break a stuck screw loose without reaching for a separate impact driver or extractor kit — automotive techs, equipment mechanics, and general maintenance work where JIS fasteners show up alongside standard ones.
Full Phillips Coverage in One Set
Six drivers span the sizes you'll actually reach for, from small electronics and trim screws up to larger mechanical fasteners.
- #0 x 75mm (3-in.) for small fasteners and precision work
- #1 drivers at 75mm (3-in.) — one standard, one JAWSFIT tip
- #2 drivers at 100mm (4-in.) Impacta and 150mm (6-in.) JAWSFIT
- #3 x 150mm (6-in.) Impacta for larger, harder-to-move fasteners
Two Drivers Built for Stuck Screws
When a screw in the set is rusted, over-torqued, or stripping, the #2 and #3 Impacta drivers give you a hammer-strike option without leaving the set.
- Tang-thru shank carries hammer force straight to the tip
- Steel cap and cam mechanism rotate the blade 12° on each strike
- Both Impacta drivers still work as normal Phillips screwdrivers
What's in the Box
- Phillips Screwdriver, #0 x 75mm / 3-in. (No. 910P075) — 1
- Phillips Screwdriver, #1 x 75mm / 3-in. (No. 900P075) — 1
- JAWSFIT Phillips Screwdriver, #1 x 75mm / 3-in. (No. 930P175) — 1
- JAWSFIT Phillips Screwdriver, #2 x 150mm / 6-in. (No. 930P2150) — 1
- Impacta Phillips Screwdriver, #2 x 100mm / 4-in. (No. 980P2100) — 1
- Impacta Phillips Screwdriver, #3 x 150mm / 6-in. (No. 980P3150) — 1
Key Specifications
| Set Size | 6 pieces |
|---|---|
| Tip Type | Phillips, JISDRIVE JIS-compatible profile |
| Blade Sizes | #0 x 3-in., #1 x 3-in. (x2), #2 x 4-in. & 6-in., #3 x 6-in. |
| Impact Drivers | 2 of 6 drivers (#2 x 4-in. and #3 x 6-in.) feature Impacta tang-thru/cam-rotation shanks |
| Impact Rotation | 12° counterclockwise per strike (Impacta drivers) |
| JAWSFIT Drivers | 2 of 6 drivers (#1 x 3-in. and #2 x 6-in.) |
| Made In | Japan |
Built For
Pro Tip
Reach for the #2 x 4-in. or #3 x 6-in. Impacta driver specifically when a screw won't turn by hand — the other four drivers in this set aren't built for hammer strikes and shouldn't be struck.
Warranty & Support
Tool Nut's Take
A Full Phillips Rotation with a Stuck-Screw Backup Plan
The Vessel 9806JSPB Megadora JISDRIVE 6-Piece Set covers the Phillips sizes you use daily and includes two Impacta drivers for the ones that fight back.
- Who it's for: Techs and DIYers who want one case covering everyday Phillips sizes plus a hammer-strike option for stuck screws, without buying a separate Impacta set.
- Why it stands out: Mixing standard, JAWSFIT, and Impacta drivers in one set means you're not choosing between coverage and capability.
- Worth knowing: Only the #2 x 4-in. and #3 x 6-in. drivers are rated for hammer strikes — check the model number stamped on the shank before you swing.
Common Questions
- Which drivers in this set can be struck with a hammer? Only the two Impacta drivers — model No. 980P2100 (#2 x 4-in.) and No. 980P3150 (#3 x 6-in.). The other four are standard-use drivers.
- Are these compatible with JIS (Japanese Industrial Standard) screws? Yes, all six drivers use Vessel's JISDRIVE tip profile, built to seat in both standard Phillips and JIS screw heads.
- Where is this set made? Japan.
- What sizes are included? #0, #1 (x2), #2 (x2), and #3 Phillips, ranging from 3-in. to 6-in. overall length.
Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
