Vessel HZB10P01 IMPACT & OUT Screw Removing Bit Assortment
Vessel HZB10P01 IMPACT & OUT Screw Removing Bit Assortment
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Vessel HZB10P01 IMPACT & OUT Screw Removing Bit Assortment is a screw removing bit set designed to extract stubborn, stripped, and stuck screws. This is a screw removing bit assortment designed for removing damaged fasteners. Model Number: HZB10P01.
These are not everyday driver bits. The tip geometry is purpose-built for removal, with a wedge-shaped design meant to seat deeper and resist cam-out so you can actually transfer torque into a chewed-up screw head. When the recess is rounded out, that deeper bite is what gives you a fighting chance instead of turning the head into a smooth crater.
The kit is sized for the common problem fasteners: Phillips and metric hex. You get Phillips sizes one through three, plus hex sizes two millimeter through five millimeter, so you can match the screw head closely and keep the bit from skipping. Two Phillips number two bits and two Phillips number three bits are included because those are the sizes that usually take the most abuse during removal.
Bit length is 4 inches (100 mm), which gives you useful reach past trim, brackets, and recessed hardware while still staying controllable in an impact driver. The set is also marked for screw removal only, which matters because removal tips are shaped to grab damaged heads, not to drive new fasteners cleanly.
On the job, you can run these with an electric impact driver when the fastener is seized, or use them with an IMPACT & OUT style hand screwdriver method (insert, grip, and strike) when you need to shock the threads loose before turning.
If you work on equipment, automotive, maintenance, or you just deal with old hardware that has been painted over and rounded out, this set is a smart add-on. It is made in Japan and focused on one job: getting the screw out without drilling the head off.
Turn Stripped Screws Into Removable Screws
When a screw head is rounded, the goal is simple: get the bit to seat and stay seated while you apply torque. The wedge-style removal tip is designed to reduce cam-out so you can break the fastener loose instead of destroying it further.
- Wedge-shaped tip design helps prevent cam-out during removal
- Designed for removing stubborn and stripped screws
Hit It, Then Turn It
For really stubborn screws, seating the bit before you apply torque can be the difference between removal and a drilled-out mess. The IMPACT & OUT method uses a strike to help the tip bite, then you rotate to back the screw out.
- Intended use: insert, grip, and strike to seat the removal tip
- Works for fasteners that are stuck, corroded, or already cammed-out
Reach and Size Coverage That Makes Sense
The 4 inch length gives you enough reach for recessed hardware, and the set spans Phillips and metric hex so you can match the fastener instead of forcing the closest bit you have.
- Overall length: 4 inches (100 mm)
- Sizes: Phillips #1, Phillips #2 (2), Phillips #3 (2), Hex 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm
What's in the Box
- (1) Phillips #1 screw removing bit
- (2) Phillips #2 screw removing bits
- (2) Phillips #3 screw removing bits
- (1) 2 mm hex screw removing bit
- (1) 2.5 mm hex screw removing bit
- (1) 3 mm hex screw removing bit
- (1) 4 mm hex screw removing bit
- (1) 5 mm hex screw removing bit
- (1) Bit holder
These bits are for screw removal only.
Key Specifications
 Overall Length |
4 in (100 mm) |
|---|---|
 Shank Type |
1/4 in hex |
 Bit Count |
10 screw removing bits |
 Drive Profiles |
Phillips and metric hex |
 Made In |
Japan |
Compatibility
Built For
Pro Tip
Before you hit it with high torque, seat the bit hard in the screw head. If the fastener is really stuck, use the insert, grip, and strike method first to help the wedge tip bite and shock the threads loose.
Tool Nut's Take
Why the Vessel HZB10P01 IMPACT & OUT Screw Removing Bit Assortment Earns Space in Your Box
This set is for the moment a screw is already ruined and you need a bit that is made to grab and back it out.
- Who it's for: Anyone doing repairs, teardown, maintenance, or automotive work where stripped screws are a regular problem.
- Why it stands out: Wedge-shaped removal tips and impact-driver usability, with the common Phillips and hex sizes in one holder.
- Worth knowing: These are labeled for screw removal only, so do not use them as everyday driver bits for installing new fasteners.
Common Questions
- Can I use these bits to drive screws in? No. They are designed for screw removal only.
- Will this work in an electric impact driver? Yes. It can be used with an electric impact driver and fits a standard 1/4 in hex chuck.
- How long are the bits? 4 inches (100 mm).
Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
