Avanti
Avanti Saw Blades, Recip Blades, and Sanding Screens
Avanti covers everyday cutting and floor prep. The lineup here includes circular and miter saw blades from 5-1/2 to 12 inches, plywood and fine finish blades, a fiber cement blade, and PRO value-packs. You will also find PRO bi-metal reciprocating saw blades in single blades and bulk packs, U-shank jig saw blade sets, carbide tipped masonry drill bits, and floor sanding screens in 12 x 18 inch and 17 inch sizes.
What to Look For
- Blade diameter. Match the blade to your saw: 7-1/4 inch for most circular saws, 10 or 12 inch for table and miter saws.
- Tooth count. High tooth counts like 100T and 140T plywood blades limit splintering. 60T and 80T blades suit fine crosscuts.
- Recip blade TPI. 6/12 TPI blades cut wood and nail-embedded material. 10/18 TPI blades are better for metal.
- Pack size. Recip blades come singly or in 10, 25, and 200 packs for crews that burn through blades.
Buy Avanti blades at The Tool Nut, a specialty tool store since 1994, with free shipping on most orders and rewards points on every order.
Avanti FAQ
What are Avanti sanding screens used for?
Sanding screens are open-mesh abrasives used on floor buffers to scuff and smooth hardwood floors between finish coats. The open mesh resists clogging. Lower grits like 60 and 80 cut faster, and 150 to 220 grit is for light passes between coats.
Do Avanti jig saw blades fit my saw?
The Avanti jig saw sets here use a U-shank. Many older and some current jig saws take U-shank blades, while most newer saws take T-shank. Check your saw's blade clamp before ordering.