The Avanti PCE120220E01W 12 in. x 18 in. 220 Grit Sanding Screen is a floor sanding abrasive made for wood surface prep and finish sanding. This is a sanding screen designed for final sanding and light stock removal on wood floors. Model Number: PCE120220E01W. If you are cleaning up a floor before top coat or knocking down minor surface wear without chewing into the wood, this is the grit range you want to be looking at.

Where this sanding screen earns its keep is in the kind of work that comes near the end of a floor refinishing job. The 220-grit rating puts it in the ultra fine category, so it is suited to smoothing and prep rather than heavy removal. That makes it a better fit for dull and scuffed floors, or for final passes after earlier, rougher abrasives have already done the hard work.

The 12 in. x 18 in. format is aimed at floor sanding equipment rather than hand sanding. For anyone using rental center equipment or commercial floor sanders, that matters because fit and sheet size determine whether the abrasive tracks properly and gives even contact across the floor. A sanding screen also has a practical advantage over solid sheets in dusty environments: the open mesh design helps with dust movement and can reduce loading during use.

Avanti positions this screen for use on wood materials, and that is the right lane for it. On wood flooring, an ultra fine sanding screen is useful for final surface prep before finishes are applied, especially when you are trying to improve feel and appearance without leaving deep scratch patterns behind. It is also a solid choice when the goal is touch-up refinement rather than full-on material removal.

From a jobsite standpoint, the big benefit is control. Coarser abrasives remove faster, but they also raise the risk of leaving marks that need more cleanup. A 220-grit floor sanding screen helps you slow the process down and dial in the surface. For contractors doing floor refinishing, maintenance crews freshening up worn wood floors, or serious DIY users renting a floor sander for a weekend project, that can save rework right before finish goes down.

This Avanti sanding screen is best for users who already know they need a fine abrasive for the last stage of sanding. If you are stripping old finish, flattening high spots, or correcting major damage, start with a more aggressive grit first. If you are at the stage where the floor is already close and you need a cleaner surface for coating, this screen makes a lot more sense.

Right grit, right stage

The Avanti PCE120220E01W 12 in. x 18 in. 220 Grit Sanding Screen makes the most sense when the floor is already close and you need a cleaner final surface before finish.

• Who it's for: Pros and serious DIY users doing wood floor refinishing with a floor sander.
• Why it stands out: The ultra fine 220 grit and screen design are a good combo for final prep and better dust handling.
• Worth knowing: This is not your first-pass abrasive. Use it for refinement, not for heavy stripping or flattening rough floors.

• What is this product used for? It is a sanding screen for wood floor sanding, mainly for light stock removal and final surface preparation before top coat.
• Is 220 grit aggressive enough for heavy floor stripping? No. A 220-grit abrasive is an ultra fine option intended for finishing stages, not major material removal.
• What materials is it intended for? The source data lists it for use on wood materials.
• How many sanding screens come in the package? Package quantity is 1.