Complete Track Saw Fence System for Festool MFT-Style Benches

The Fence Bundle pairs the F1 and F2 Surface-Mount Fences into a complete crosscut and miter system for Festool MFT, Dash-Board, ShortCut, and other 20mm-grid benches. It covers square crosscuts, miters, and repeatable stops in one purchase for track saw owners running Festool, Makita, Bosch, or Mafell rails.

The full Dash-Board fence system. One order.

The Fence Bundle gives you everything you need to set up a complete fence system on any compatible workbench. The 54¾" F2 Fence sets your primary reference edge for crosscuts, rips, and miter setups. The 30" F1 Fence extends material support and stop placement to the right side of the blade. The two Reversible Flip Stops let you set repeat-length cuts on either fence, on either side of the blade. Together this is the workflow that turns a bench into a production crosscut platform.

• 1 F2 Surface Mount Fence (54¾" primary reference)
• 1 F1 Surface Mount Fence (30" right-of-blade companion)
• 2 Reversible Flip Stops for repeat-length cuts
• Stop-setting capacity on both sides of the blade

A better value than buying the pieces separately.

Buying these components separately costs more than ordering them together. Choose the bundle and you'll pay less than the à la carte total, a built-in saving on the complete fence and flip stop setup. Same F1 and F2 fences. Same Reversible Flip Stops. Same anodized aluminum extrusion and machined parts that ship in every individual product order. The bundle gives buyers who know they want both fences plus the flip stops the best value on the complete kit.

• Costs less than buying the components separately
• One bundle, one checkout
• Built-in savings versus à la carte
• Same components, same quality, no substitutions

Works on the bench you already own.

The Fence Bundle mounts to any workbench with a 20mm hole grid using the included sliding Fence Blocks. The F2 ships with 3 blocks, the F1 ships with 2. Drop the blocks into 20mm holes, lock down with all-metal knobs, and the fence is set. Works on the Dash-Board, ShortCut, Festool MFT3, Festool 1080, Benchdogs Ultra MFT, Kreg ACS (mount on Track Stars on the side of the ACS), TrackTubes, T-slot extrusion tables (8mm slot), and DIY MFT-style benches.

• Dash-Board, ShortCut, Festool MFT3, Festool 1080
• Benchdogs Ultra MFT, TrackTubes
• DIY benches with 20mm hole grid
• Kreg ACS only when fence is mounted on Track Stars

Set the dimension once. Run the batch.

The pairing of two fences and two Flip Stops is what makes this bundle a true production accessory. Position the F2 as your primary reference. Position the F1 to extend support right of the blade. Set a Flip Stop on the F2 for your repeat length, set another on the F1 for a secondary dimension, then flip either out of the way when you need a one-off cut. Same registration, same workflow, just rotated. This is the configuration cabinet makers and finish carpenters use to cut entire batches without re-measuring between parts.

• 2 Flip Stops for 2 simultaneous dimensions
• Flip up out of the way for one-off cuts without losing settings
• Pairs with the Rip Gauge for kerf-corrected stop setting
• Mounts on Track Stars for extended crosscut capacity

What's In The Box:

• 1 F2 Surface Mount Fence (with 3 Fence Blocks, 1 rubber bumper)
• 1 F1 Surface Mount Fence (with 2 Fence Blocks, 2 rubber bumpers)
• 2 Reversible Flip Stops

Specifications — F2 Fence

• Length: 54¾" (1390mm)
• Width: 1.1" (28mm)
• Height: 1.5" (38mm)

Specifications — F1 Fence

• Length: 30" (762mm)
• Width: 1.1" (28mm)
• Height: 1.5" (38mm)

Materials:

• Fences: Anodized aluminum
• Bumpers: Rubber
• Knobs: All-metal

Key Features:

• Adjustable to any angle
• Compatible with any grid of 20mm holes
• Easily and securely mounts with our unique Fence Blocks
• F2 Tongue section slips under the guide rail for support near the cut line
• Compatible with our Reversible Flip Stops for repeat cuts
• Fences also mount on Track Stars for added crosscut capacity
• Rubber bumper to protect fence and floor when stored standing up

Compatibility — Track Saws & Rails

• Festool, Makita-style rails
• Bosch and Mafell rails
• DeWalt and Metabo rails
• Powertec, Milwaukee, WEN, Grizzly
• Important: The F2 works only with track saws that cut on the right side of the guide rail. The F1 works with both left- and right-cutting saws.

Compatibility — Workbenches

• Dash-Board bench
• ShortCut bench
• Festool MFT3 and 1080
• Benchdogs Ultra MFT
• Kreg ACS (fences mount on Track Stars on the side of the ACS only)
• TrackTubes
• T-slot extrusion tables (8mm slot)
• Wood-frame tables with standard T-track
• DIY MFT-style benches

Recommended Guide Rail Length

• Bench width + 13" (330mm) minimum

Critical Generation Note:

• Gen 2 and Gen 1 Fences and Flip Stops cannot be mixed. This bundle contains Gen 2 components. Verify your existing fence and flip stop generations before mixing with the bundle contents.

Product Safety:

• Be mindful of pinch points
• Secure all hardware before use to avoid accidents or injury.
• Use appropriate lifting form to avoid injury
• Keep out of reach of children
• Workbenches and Outriggers not intended as standing platforms
• For safest operation please keep static loads below 300 lbs or 136 kg
• Disassembly or product alterations are not recommended
• Do not use products for uses other than intended

Frequently Asked Questions

• What is included in the Fence Bundle? The Fence Bundle includes 1 F2 Surface Mount Fence (54¾" primary reference fence with 3 Fence Blocks), 1 F1 Surface Mount Fence (30" right-of-blade companion with 2 Fence Blocks), and 2 Reversible Flip Stops. Together, these components give you a complete crosscut fence system with stop-setting capacity on both sides of the blade. Ordering them together costs less than buying each piece à la carte.
• Is the Fence Bundle compatible with my track saw? The F2 Fence works only with track saws that cut on the right side of the guide rail, including Festool, Makita-style rails, Bosch, Mafell, DeWalt, Metabo, Powertec, Milwaukee, WEN, and Grizzly. The F1 Fence works with both left- and right-cutting saws. Verify your saw's blade position before purchase. If you own a left-cutting saw, the F1 alone can serve as your primary fence, and the F2 included in the bundle becomes a secondary or backup fence.
• What workbenches is the Fence Bundle compatible with? The Fence Bundle is compatible with any workbench that has a 20mm hole grid, including the Dash-Board bench, ShortCut bench, Festool MFT3 and 1080, Benchdogs Ultra MFT, Kreg ACS, TrackTubes, T-slot extrusion tables with 8mm slot, wood-frame tables with standard T-track, and DIY MFT-style benches. Note: Kreg ACS customers must mount the fences on Track Stars on the side of the ACS rather than the main bench top.
• Will the Fence Bundle components mix with my Gen 1 fences or Flip Stops? No. The Fence Bundle contains Gen 2 fences and Flip Stops. Gen 2 and Gen 1 fences and Flip Stops cannot be mixed because of mechanical and dimensional differences between the two generations. If you currently own Gen 1 fences or Flip Stops, you'll need to keep the two generations separate — you cannot use a Gen 1 Flip Stop on a Gen 2 fence or vice versa. Verify your generation before purchase.
• What should I add to the Fence Bundle for the complete crosscut workflow? The Fence Bundle handles the fence and flip stop portion of the crosscut workflow. To complete the system, add the Guide Rail Bracket Set for the precision crosscut hinge that registers your guide rail square to the fence every time. For dimensional rip workflows, also add Parallel Guides and the Rip Gauge.