Complete Festool MFT Upgrade & Track Saw Workbench System

The Pro Accessories Bundle is the complete Dash-Board system: every crosscut, rip, fence, and workholding accessory needed to turn a Festool MFT/3 or any 20mm-grid bench into a full track saw workstation. It is the most direct path for serious Festool, Makita, and Bosch track saw owners to replace table-saw and panel-saw workflows.

Everything you need to unlock the bench.

The Pro Accessories Bundle is the kit Rob designed to transform a Dash-Board or ShortCut bench from a worktable into a unified woodworking system. Every key function of the bench, from crosscutting to ripping, dimensioning, miter cuts, vertical work, and batch processing, is unlocked by the components in this bundle. The Guide Rail Bracket Set squares your rail. The Track Stars extend your platform. The F1 and F2 fences set your references. The Rip Gauge and Parallel Guides handle dimensional rips. The Wingman pushes capacity past the bench edge. This is the system that makes the bench the foundation of your shop.

• Guide Rail Bracket Set for square crosscuts
• 6 Track Stars for extended cutting and ripping platforms
• F1 and F2 Fences for repeatable reference edges
• Rip Gauge, Parallel Guides, and Wingman for dimensional work

A better value than buying the pieces separately.

Buying these components separately costs more than ordering them together. Choose the bundle and you'll pay less than the à la carte total, a built-in saving without compromise on quality, components, or fit. Same Guide Rail Brackets. Same Track Stars. Same F1 and F2 fences. Same machined parts and anodized aluminum that ship in every individual product order. The bundle exists to give buyers who know they want the primary system the best value in one order.

• Costs less than buying the components separately
• One bundle, one checkout
• Built-in savings versus à la carte
• Same components, same quality, no additions needed

33 ⅝-inch crosscuts. The bench-only limit.

The Pro Bundle handles crosscuts up to 33⅝" (854mm) wide, which is the maximum capacity of the Dash-Board bench when set up with this configuration. That covers nearly every cabinet door, drawer front, casework side, and dimensional lumber crosscut a woodworker makes day to day. For full-sheet crosscuts (cuts wider than 33⅝"), the bench needs the Outrigger Bundle to extend the platform further, which is the difference between the Pro Bundle and the Platinum Bundle. If your work rarely involves cutting 4-foot-wide sheet goods at once, Pro is the right level. If you process full sheets regularly, step up to Platinum.

• 33⅝" (854mm) maximum crosscut width
• Covers most cabinet, drawer, and casework dimensions
• Bench-only platform, no Outrigger Bundle needed
• Step up to Platinum for full-sheet crosscut capacity

The right starting point for the serious workflow.

The Pro Bundle is built for woodworkers and trade professionals who want the primary Dash-Board system without committing to the full-sheet processing setup that the Outrigger Bundle adds. Finish carpenters doing on-site batch work. Cabinet makers building doors and drawer fronts. Serious hobbyists building furniture, kitchens, and casework where most cuts fall within 33⅝". If you're new to the Dash-Board system, this is the bundle that gets you the core capability in one order without the Outrigger components you may not need. If full-sheet rips are part of your weekly workflow, step up to Platinum.

• Finish carpenters with on-site batch work needs
• Cabinet makers building doors, drawers, and casework
• Serious hobbyists building furniture and kitchens
• Anyone who wants the primary system without full-sheet capacity

What's in the box:

• 1 Guide Rail Bracket Set
• 8 Bench Dogs (4 Tall - 1” and 4 Short - 3/16")
• 6 Track Stars
• 1 F2 Fence - 54.75” (1390mm)
• 1 F1 Fence - 30” (762mm)
• 2 Reversible Flip Stops
• 1 pair SpiRail Dogs
• 2 Door & Panel Supports (only compatible with Dash-Board benches)
• 2 Parallel Guides
• 1 Rip Gauge
• 1 Wingman

Key Functions:

• 33 ⅝” crosscuts (854 mm)
• Full sheet rips
• Unrivaled vertical work holding
• Miter cut capability
• Efficient batch work
• Offcut support
• Short workpiece control
• Set dimensions or replicate parts with a physical template
• Material management with multiple stop options
• Position, clamp, and assemble parts with ease 
• Accurate and narrow cuts with your track saw
• Rip and install edge banding
• Solid foundation for confidence with of all aspects of woodworking and cabinetry

Compatibility:

• The Dash-Board Workbench
• The Dash-Board ShortCut Workbench
• The MFT3 & 1080, Benchdogs Ultra MFT, TrackTubes, and DIY benches with 20mm holes and T-slot extrusion (minimum 8mm slot)
• Door and Panel Support is ONLY directly compatible with Dash-Board workbenches

Product Safety:

• Be mindful of pinch points
• Secure all hardware before use to avoid accidents or injury.
• Use appropriate lifting form to avoid injury
• Keep out of reach of children
• Workbenches and Outriggers not intended as standing platforms
• For safest operation please keep static loads below 300 lbs or 136 kg
• Disassembly or product alterations are not recommended
• Do not use products for uses other than intended

Frequently Asked Questions

• What is included in the Pro Accessories Bundle? The Pro Accessories Bundle includes the complete core Dash-Board accessory system: 1 Guide Rail Bracket Set (with 2 Universal Setup Blocks, 4 Medium Bench Dogs, and 1 SpiRail Dog), 6 Track Stars, 1 F2 Fence (54.75"), 1 F1 Fence (30"), 2 Reversible Flip Stops, 1 pair of SpiRail Dogs, 2 Door and Panel Supports, 2 Parallel Guides, 1 Rip Gauge, 1 Wingman, and 8 Bench Dogs (4 Tall, 4 Short). See the full specs section for the complete component list.
• What is the difference between the Pro Bundle and the Platinum Bundle? The Pro Accessories Bundle includes the core Dash-Board accessory system, the Platinum Bundle adds the complete Outrigger Bundle on top of it. The practical difference is crosscut capacity, the Pro Bundle handles crosscuts up to 33⅝" wide, while the Platinum Bundle (with the Outrigger Bundle additions) enables full-sheet crosscuts and rips on standard 4x8 sheet goods. Choose Pro if your work rarely involves 4-foot-wide crosscuts. Choose Platinum if full-sheet processing is part of your weekly workflow.
• Does the Pro Bundle include a workbench? No, the Pro Accessories Bundle does not include a workbench. It is an accessory bundle only, designed to be paired with a Dash-Board Workbench or ShortCut Workbench purchased separately. The bundle is compatible with both Dash-Board benches but is not designed for third-party benches because it includes the Door and Panel Supports, which require proprietary Dash-Board mounting points.
• How much does the Pro Bundle save versus buying components separately? The Pro Accessories Bundle costs less than buying the same components à la carte. That savings comes with no quality compromise, no missing components, and no substituted parts, every item in the bundle is identical to what ships in the individual product orders.
• Can I add the Outrigger Bundle later to upgrade to Platinum capability? Yes, you can add the Outrigger Bundle to the Pro Bundle later to reach the same configuration as the Platinum Accessories Bundle. Many Dash-Board owners start with the Pro Bundle, work with it for a while, and add the Outrigger Bundle when their workflow shifts toward full-sheet processing. The combined cost of Pro Bundle plus Outrigger Bundle is slightly higher than ordering the Platinum Bundle at once, so if you know you'll need both, the Platinum Bundle is the better value.