Repeatable Crosscut Stop for Track Saw Fences

The Reversible Flip Stop adds repeatable length stops to your Dash-Board or Festool MFT crosscut fence, so every part comes off the track saw identical. Flip it down to register a cut, flip it up to clear long stock, the simplest way to batch repeat cuts on an MFT-style bench.

Set it once. Cut the same length all day.

The Reversible Flip Stop is what turns the F1 and F2 Surface Mount Fences into a true repeat-cut system. Position the stop at your desired length, lock it down, and run identical parts back to back without measuring between each cut. The solid, rigid design holds position under repeated workpiece contact, so the dimension doesn't drift over the course of a batch. Flip it up out of the way when you need to cut longer parts, then flip it back down without losing the setting.

• Sets repeatable lengths on the F1 and F2 fences
• Solid, rigid design holds its setting under load
• Flips up out of the way for longer cuts
• Smooth, comfortable operation

Two sides. More placement options.

The Reversible Flip Stops symmetrical design allows it to be reversed depending on the orientation of your workpiece and where you need the stop face to register. This versatility means one Flip Stop handles workflows that other stops can't, and it gives you more flexibility when mixing the Flip Stop with the F1, the F2. Many Dash-Board owners run multiple Flip Stops to allow for different cut lengths set at the same time.

• Symmetrical design for more placement orientations
• Works on the F1 and F2 fences
• Smooth flip mechanism, comfortable in the hand
• Stack multiple stops for multiple cut lengths

Built for Dash-Board Fences.

The Reversible Flip Stop is designed exclusively for the Gen 2 Dash-Board Surface Mount Fences (F1 and F2). It is not compatible with Gen 1 fences or with other third-party fence systems. If you're running the current Dash-Board fence system, the Flip Stop slides on and locks down with a single comfortable knob. If you're not sure which generation you have, check your fence purchase or contact us before adding the Flip Stop.

• Exclusively for Gen 2 F1 and F2 Surface Mount Fences
• Not compatible with Gen 1 fences or third-party systems
• Tool-free attachment and adjustment
• Single locking knob for fast setting

The piece that makes batch work fast.

A fence without a flip stop is just a backstop. A fence with a flip stop is a production tool. The Reversible Flip Stop is what cabinet makers, finish carpenters, and woodworkers cutting parts in batches add to unlock the real production speed of the Dash-Board fence system. It pairs with the Rip Gauge for kerf-corrected stop setting oneither side of the blade, with fences mounted on Track Stars, and with the Guide Rail Bracket Set for square crosscuts every time.

• Required for repeatable production work
• Pairs with the Rip Gauge
• Works with fences mounted on Track Stars
• Completes the Guide Rail Bracket Set workflow

What’s in the box:

1 Reversible Flip Stop​

Build:

• Solid, rigid construction, smooth flip mechanism, single comfortable locking knob, two-sided reversible design

Compatibility — Fences

• F2 Surface Mount Fence and F1 Surface Mount Fence

Compatibility — Workbenches

• Any workbench compatible with the F1 and F2 Fences, including: Dash-Board bench, ShortCut bench, Festool MFT3 and 1080, Benchdogs Ultra MFT, Kreg ACS, and DIY MFT-style benches

Critical Compatibility Note

• Compatible ONLY with Gen 2 Dash-Board Surface Mount Fences. Will not work with Gen 1 fences or other third-party fence systems. Verify your fence generation before purchase.

Product Safety:

• Be mindful of pinch points
• Secure all hardware before use to avoid accidents or injury.
• Use appropriate lifting form to avoid injury
• Keep out of reach of children
• Workbenches and Outriggers not intended as standing platforms
• For safest operation please keep static loads below 300 lbs or 136 kg
• Disassembly or product alterations are not recommended
• Do not use products for uses other than intended

​

Frequently Asked Questions

• What is the Reversible Flip Stop and what does it do? The Reversible Flip Stop is a precision stop designed to attach to the Gen 2 Dash-Board F1 and F2 Surface Mount Fences, enabling repeatable cut lengths without re-measuring. Set the stop at your desired length, lock it in place, and run identical parts back to back. The two-sided reversible design lets you orient the stop face in either direction depending on your workflow, and the solid, rigid build holds its setting under repeated workpiece contact.
• Is the Reversible Flip Stop compatible with my fence? The Reversible Flip Stop is compatible only with the Gen 2 Dash-Board F1 and F2 Surface Mount Fences. It will not work with Gen 1 Dash-Board fences or with third-party fence systems from other manufacturers. If you're unsure which generation of fence you own, check your original purchase records or contact Dash-Board directly before adding the Flip Stop to your order.
• Can I use multiple Flip Stops on the same fence? Yes, you can run multiple Reversible Flip Stops on the same fence to set multiple cut lengths without resetting between dimensions. Many Dash-Board owners run two or three Flip Stops at once, with each set to a different repeat length, then flip the unused stops up and out of the way during each cut. This is particularly useful for batch work involving multiple part sizes from the same workpiece.
• What is the difference between the Reversible Flip Stop and a standard fence stop? The difference between the Reversible Flip Stop and a standard fence stop is the two-sided reversible design and the flip mechanism. The reversible faces allow the stop to register workpieces from either direction without removing and reinstalling the stop, and the flip mechanism lets you swing it up out of the way for longer cuts without losing the setting. Both features speed up workflows that mix repeat cuts with one-off long cuts in the same session.
• What is included with the Reversible Flip Stop? The Reversible Flip Stop is sold as a single unit (1 Flip Stop per order). The unit includes the body, the reversible stop faces, and the locking knob, all integrated as a single piece for tool-free setup. No additional mounting hardware is required, the Flip Stop attaches directly to a Gen 2 Dash-Board F1 or F2 Surface Mount Fence. Many woodworkers order multiple Flip Stops to enable multiple cut lengths set simultaneously.