Diablo 7-1/4-in. x 44-Tooth Composite Material/Plastics TrexBlade (D0744CD)
Diablo 7-1/4-in. x 44-Tooth Composite Material/Plastics TrexBlade (D0744CD)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Diablo D0744CD 7-1/4 in. x 44-Tooth TrexBlade Circular Saw Blade for Composites and Plastic is a purpose-built circular saw blade for cutting composite decking and cellular PVC. This is a circular saw blade designed for cutting composite decking and cellular PVC. Model Number: D0744CD. If you are building a deck, trimming composite boards, or working with plastic-based exterior materials, this blade is made to solve the biggest problem with those materials: heat, gumming, and ugly cut edges.
Where a general framing blade can leave melted edges or rough finish work in composite stock, this TrexBlade uses a 44-tooth layout with a modified triple chip grind to stay cooler through the cut. In plain terms, that means the blade is set up to shear these materials cleanly instead of tearing or smearing them. Diablo also calls out that it is the only blade recommended by Trex Company for composite decking, which makes it a strong fit for anyone working specifically with Trex boards and similar wood-alternative decking products.
The cutting edge uses TiCo hi-density carbide, which matters because composite materials can be abrasive and hard on standard blade teeth. More durable carbide helps the blade hold its edge longer, so you are not swapping blades in the middle of a decking job just because the material is wearing it down. Diablo also backs that up with Perma-SHIELD non-stick coating to reduce drag and fight the gumming and heat buildup that often show up when cutting plastic-heavy materials.
Jobsite practicality is where this blade makes the most sense. The thin 0.065 in. kerf needs less power than a heavier blade, so it is a smart match for both corded circular saws and cordless circular saws. If you are running a battery saw on a deck install, less cutting resistance helps the saw stay on line and work more efficiently. Laser-cut stabilizer vents are there to keep the blade running straight and reduce vibration, which helps with cut quality and helps keep swirl marks off the finished edge.
Compatibility is straightforward. The 7-1/4 in. blade diameter and 5/8 in. arbor fit standard 7-1/4 in. corded and cordless circular saws, and the blade also features a 13/16 in. diamond knockout. Maximum rated speed is 10,000 RPM, so it is built for typical circular saw use. This is not a general demolition or all-material blade, though. Diablo specifically states it is for composite decking, cellular PVC, plastics, and similar materials, and it is not recommended for ferrous metals or masonry.
Who should buy it? Deck builders, remodelers, finish carpenters handling exterior trim, and serious DIYers working with composite decking are the right crowd for this blade. If your job includes Trex, PVC trim, or other plastic-based exterior boards and you care about a clean edge right off the saw, this is the right style of circular saw blade. If you mostly cut framing lumber or mixed jobsite material, a general-purpose blade makes more sense. This one earns its place when composites and plastics are the actual job.
What's in the Box
- (1) Diablo D0744CD 7-1/4 in. x 44-Tooth TrexBlade Circular Saw Blade
Key Specifications
| Blade Diameter | 7-1/4 in. |
|---|---|
| Tooth Count | 44 |
| Arbor Size | 5/8 in. |
| Knockout Type | 13/16 in. Diamond |
| Kerf | 0.065 in. |
| Maximum Speed | 10,000 RPM |
| Blade Material | Carbide |
| Tooth Grind | Modified Triple Chip Grind (MTCG) |
| Material Cut | Composite decking, cellular PVC, and plastics |
| Made In | Italy |
Compatibility
Built For
Pro Tip
If you are switching over from a wood framing blade, do not expect the same result on composite boards. Put the Diablo D0744CD TrexBlade on your 7-1/4 in. saw for the decking portion of the job, and keep your wood blade separate so you get cleaner finished edges and less gumming on both cuts.
Tool Nut's Take
Diablo D0744CD 7-1/4 in. x 44-Tooth TrexBlade Circular Saw Blade That Actually Makes Sense for Deck Work
If you cut composite decking with regular blades and wonder why the edge looks cooked, this is the fix.
- Who it's for: Contractors and serious DIYers building decks, trimming cellular PVC, or working with Trex and similar composite boards.
- Why it stands out: It is built specifically for composite and plastic materials, uses a modified triple chip grind for cleaner edges, and the thin kerf is easier on cordless circular saws.
- Worth knowing: This is a specialty blade, not a catch-all. It is not recommended for ferrous metals or masonry, so keep it in its lane and it will do its job well.
Common Questions
- What saws does this blade fit? It fits standard 7-1/4 in. corded and cordless circular saws that use a 5/8 in. arbor.
- What materials is this blade made to cut? It is designed for composite decking, cellular PVC, plastics, and similar composite materials.
- Is this a good blade for Trex decking? Yes. Diablo states this TrexBlade is the only blade recommended by Trex Company for composite decking.
- Can I use it on metal or masonry? No. Diablo specifically says it is not recommended for ferrous metals or masonry.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

