The Diablo DCD070080S01W 7 in. 80 Grit Edger Disc is a 7 inch hook and loop sanding disc for edger sanders. This is a sanding disc designed for floor sanding, moderate stock removal, and intermediate surface preparation. Model Number: DCD070080S01W. If you are smoothing floor edges and getting a surface ready before top coat placement, this is the grit range that handles material removal without jumping straight to a rougher paper than the job calls for.

On the job, the big story here is balance. An 80-grit edger disc gives you enough bite to clean up edges, level light unevenness, and prep wood surfaces between heavier removal and final finish sanding. Diablo calls it out for heavy stock material and intermediate sanding, which matters because it tells you this disc is meant to keep moving on real prep work, not just light touch-up passes.

Diablo also backs this disc with a premium zirconium blend abrasive and a high-strength resin bond. In plain terms, that means the grit is built to stay attached to the backing under heat and pressure, which is exactly what you want when an edger is working hard along room perimeters. The ENDURA-BOND resin system is there for durability, while the Clog-SHIELD coating is intended to reduce pitch build-up and loading so the disc keeps cutting instead of skating across a packed surface.

The hook and loop attachment is another practical advantage. Swapping discs is faster than peel-and-stick styles, especially when you are stepping through sanding stages or replacing worn paper during a floor job. That saves time, but it also helps keep the machine working consistently because you are more likely to change out a tired disc before it starts burning time and finish quality.

In terms of fit, this disc is sized specifically for 7 inch edger sanders and is listed for use with disc and orbital sanders. The 7 inch diameter is the key spec to match before ordering, and the single-disc pack makes sense if you are replacing a specific grit in your sanding sequence or filling a gap in your abrasive supply.

For material use, it is explicitly made for wood. That makes this a straightforward choice for floor refinishers, remodelers, and serious DIY users doing edge sanding around walls, corners, and other spots a full-size floor sander cannot reach. If your work is mostly wood floor prep and you need a medium-grade disc that removes material at a useful pace without being too fine to matter, this is the right lane for this accessory.

Diablo DCD070080S01W 7 in. 80 Grit Edger Disc Gets the In-Between Work Done Right

This is a practical floor sanding disc for users who need real edge prep performance without overthinking the grit choice.

• Who it's for: Floor refinishers, remodelers, and serious DIY users running a 7 inch edger sander on wood surfaces.
• Why it stands out: The zirconium blend abrasive, clog-resistant coating, and resin bond are the details that matter because they help the disc keep cutting longer under edger sander heat and pressure.
• Worth knowing: This is sold as a single disc and it is best suited to moderate stock removal and prep work, not final finish sanding.

• What type of tool is this disc designed for? It is designed for a 7 inch edger sander and is also listed for use with disc and orbital sanders when the size and hook and loop interface match.
• What kind of sanding is 80 grit best for? This grit is recommended for moderate stock removal and sanding preparation before top coat placement.
• How does the disc attach to the tool? It uses a hook and loop attachment method for quick changes.
• What material is it explicitly recommended for? Wood.