Festool 205561 HW 160x1,8x20 WD42 Fine Cut Wood Saw Blade for TS 55 / TSC 55 / HK 55 / HKC 55
Festool 205561 HW 160x1,8x20 WD42 Fine Cut Wood Saw Blade for TS 55 / TSC 55 / HK 55 / HKC 55
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Festool 205561 HW 160x1,8x20 WD42 Fine Cut Wood Saw Blade is a 160 mm circular saw blade made for clean finish cuts in wood sheet goods and solid stock. This is a circular saw blade designed for fine cross cutting and splinter-free finish work. With Model Number 205561, it is aimed at users running compatible Festool plunge-cut saws and circular saws who care more about edge quality than aggressive demolition-style feed speed.
What matters here is the cut quality. Festool specs this blade with 42 teeth, a 1.8 mm cutting width, and a tooth form tuned for fine-cut work. In practical terms, that means cleaner crosscuts in solid wood and better results on coated panels, veneered panels, and MDF where tear-out shows fast. Festool also calls out acrylic glass as a suitable material, which makes this a useful blade when the job mixes wood-based materials with trim-grade plastic sheet.
The blade itself is made from high-quality steel with fine-grain carbide teeth. That matters because a finish blade only earns its keep if it stays sharp and keeps producing the same cut from the first panel to the last. Festool specifically ties the carbide and revised tooth geometry to improved cutting performance and longer service life, so this is not just about making one nice cut. It is about holding a consistent finish over time.
Festool also designed the cutting angle and tooth shape around the machine and application rather than using a generic one-size-fits-most layout. For buyers already in the Festool system, that is the real advantage. A blade that is matched to the saw is usually smoother, more predictable, and easier to trust when you are cutting visible material that cannot be patched or hidden later.
On the job, this blade makes the most sense for cabinet parts, finished plywood, laminated sheet goods, veneered panels, and solid wood crosscuts where cleanup time costs money. It is not presented as a framing blade or a rough rip blade. It is a finish-focused accessory for users who want a ready-to-install edge straight off the saw or at least less sanding and touch-up after the cut.
Compatibility is important on this one. Festool lists it for the TS 55 F, TSC 55 K, TSC 55 KS, HK 55, HKC 55, and HKC 55 K. There is also a specific fit note from supplementary seller data: this blade is not compatible with TSC 55 models made before 2021, TS 55 EQ, or TS 55 REQ. If you own an older TS 55 platform saw, double-check before you order, because the blade is built around the newer compatible saw lineup.
Who should buy it? Finish carpenters, cabinet installers, remodelers, and serious DIY users working with expensive sheet goods will get the most out of it. If your typical job is breaking down framing lumber, there are cheaper blades for that. If your goal is clean, controlled, repeatable finish cuts on a compatible Festool saw, this is the right kind of blade to have on the arbor.
Festool 205561 HW 160x1,8x20 WD42 Fine Cut Wood Saw Blade for Finish-Grade Cuts
This blade is built for the kind of cuts where the edge will be seen. The fine-tooth layout is meant to leave cleaner results on finished wood products and other splinter-prone materials, so you spend less time fixing the cut after the saw is put down.
- 42-tooth fine-cut design for clean crosscuts and reduced tear-out
- Suitable for solid wood, MDF, veneered panels, coated panels, and acrylic glass
What's in the Box
- (1) Festool HW 160x1,8x20 WD42 US saw blade
Key Specifications
| Diameter | 160 mm (6.29 in) |
|---|---|
| Cutting Width | 1.8 mm (0.070 in) |
| Blade Thickness | 1.2 mm (0.05 in) |
| Arbor Size | 20 mm (4/5 in) |
| Tooth Count | 42 |
| Tooth Shape | WD |
| Chip Angle | 10° |
| Relief Angle | 15° |
Compatibility
Built For
Pro Tip
Use this blade when the face quality matters most, especially on veneered or coated panels. It is a better choice for final-size finish cuts than a general-purpose blade, and that usually means less edge cleanup before install.
Tool Nut's Take
Buy it for the cut quality, not just the fit
The Festool 205561 HW 160x1,8x20 WD42 Fine Cut Wood Saw Blade is the blade you grab when sheet goods are expensive and rough edges are not acceptable.
- Who it's for: Pros and serious DIY users cutting finish-grade plywood, MDF, veneered panels, coated panels, and solid wood on compatible Festool saws.
- Why it stands out: The 42-tooth fine-cut geometry, narrow kerf, and carbide tooth construction are all aimed at cleaner cuts and longer-lasting edge quality.
- Worth knowing: This is not the blade to buy just because it fits. It is worth it if your work is visible and your saw is on the compatibility list. Older TSC 55 and some TS 55 models need a double-check before ordering.
Common Questions
- What materials is this blade designed to cut? Festool lists it for solid wood, MDF, coated panels, veneered panels, and acrylic glass, with a focus on clean fine cuts.
- What kind of cut is this blade best at? It is built for clean, splinter-free crosscuts and finish work rather than rough framing or heavy rip cutting.
- Which Festool saws does it fit? Festool lists TS 55 F, TSC 55 K, TSC 55 KS, HK 55, HKC 55, and HKC 55 K as compatible models.
- Will it fit older TSC 55 or TS 55 saws? Supplementary seller data says it is not compatible with TSC 55 models made before 2021, TS 55 EQ, or TS 55 REQ track saws.
Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
