Festool Splinterguard for PS300, PSB300 and Carvex Jigsaws, 5-pack (490120)
Festool Splinterguard for PS300, PSB300 and Carvex Jigsaws, 5-pack (490120)
Out of Stock - Available to Order - Usually ships in 7-14 days
Product Details
Product Details
Key Features
Overview
The Festool 490120 Splinterguard for PS300, PSB300 and Carvex Jigsaws 5-Pack is a jigsaw splinter guard made for cleaner cuts with compatible Festool jigsaws. This is a splinter guard designed for reducing tear-out during precision jigsaw cutting. Model Number 490120. If you cut melamine, veneered panels, laminates, or any finish material where the top edge matters, this small accessory does real work.
The main job here is simple: give the blade a zero-clearance support point at the cut line. On the first cut, the splinterguard trims itself to match the blade installed in the saw. That custom fit helps support the material right up to the teeth, which reduces fraying and chipping on the upper side of the workpiece. In practical terms, that means less cleanup, fewer spoiled edges, and less time fixing cuts that should have been right the first time.
Festool uses a solid one-piece transparent design, which matters more than it sounds. The one-piece construction keeps the insert stable, while the clear body helps maintain visibility at the cut line. For detail work, cabinet parts, and finish carpentry, being able to track the blade while still protecting the material is the whole point.
This accessory is built specifically for Festool PS 300, PSB 300, PS(C) 420, and PSB(C) 420 jigsaws, including Carvex models. That tool-specific fit is what separates it from generic accessories. You are not trying to adapt a universal part or live with slop around the blade. You are using a part intended to work with the saw's base and blade path.
Because the splinterguard is matched to the blade during use, it also makes sense as a wear item. Festool recommends replacing it with a new blade or when you notice cut quality starting to fall off. That is a practical move on finish work. If the insert edge is worn or opened up too far, it cannot support the cut line the way it should.
This is a smart buy for woodworkers, cabinet installers, trim carpenters, and serious DIY users who expect cleaner jigsaw cuts in visible materials. If your work ends up painted, edged, or hidden, you may not care. But if the cut edge is going to be seen, or you want to avoid extra sanding and touch-up, this is one of those inexpensive accessories that earns its spot fast.
Reduce Tear-Out on Finish Materials
If you are trying to keep the top face of a panel clean, this accessory helps the blade cut with less chipping and fraying. That matters most on laminated stock, veneered sheet goods, and other materials that show every mistake.
- Zero-clearance style support helps improve cut quality
- Especially useful on delicate materials like melamine
Matched to the Blade You Use
The first cut trims the splinterguard to the exact blade installed in your jigsaw. That gives you a tighter opening around the blade and better support right where tear-out usually starts.
- Use a fresh splinterguard with a new blade for best results
- Replace when cut quality noticeably drops
What's in the Box
- (5) Replacement Splinterguards
Jigsaw blade not included.
Key Specifications
| Tool Type | Splinter guard |
|---|---|
| Piece Count | 5 |
| Compatible Jigsaws | PS 300, PSB 300, PS(C) 420, PSB(C) 420 |
| Weight (lbs) | 0.05 lbs |
| Height (in) | 1 in |
| Made In | Germany |
Compatibility
Built For
Pro Tip
If you switch to a different blade profile, start with a fresh splinterguard. The whole advantage comes from that tight blade-specific opening, and once it wears or gets widened out, your cut edge usually tells on you.
Tool Nut's Take
Festool 490120 Splinterguard for PS300, PSB300 and Carvex Jigsaws 5-Pack is cheap insurance for cleaner cuts
If you care about the top edge of the cut, this is one of those small accessories that saves more time than it costs.
- Who it's for: Anyone running a compatible Festool jigsaw for cabinet parts, trim work, laminate, melamine, or other finish-sensitive materials.
- Why it stands out: It cuts itself to your blade and works like a zero-clearance insert, which is exactly what helps keep tear-out under control.
- Worth knowing: This is a wear item, not a one-and-done accessory. You get five in the pack, and that is the right call if you want to keep cut quality consistent.
Common Questions
- What does this splinter guard do? It reduces tear-out and fraying on the upper side of the material by creating a tighter blade opening for cleaner jigsaw cuts.
- Which jigsaws does it fit? It is suitable for Festool PS 300, PSB 300, PS(C) 420, and PSB(C) 420 jigsaws, including Carvex models.
- When should you replace it? Festool recommends using a new splinterguard with a new blade or replacing it when you notice a drop in cut quality.
- Is the jigsaw blade included? No. The jigsaw blade is not included.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

