Festool 493047 Hose Sleeve, Antistatic Connector Sleeve is a hose connector sleeve built for dust extraction system setup and hose-to-hose connection. This is a connector sleeve designed for joining multiple suction hose lengths and sizes in a Festool dust collection setup. Model Number: 493047. If you run different hose diameters depending on the tool or need extra reach at the jobsite, this part gives you a clean way to connect them without piecing together a workaround.

The main job here is simple: connect Festool D 50, D 36, and D 27 hoses at the rotating connector end so you can match hose size and overall length to the task. That matters when one setup does not fit every tool. A larger hose may make sense for higher-volume debris, while a smaller hose can be easier to manage on sanders and finish tools. This sleeve helps bridge those setups inside the same Festool dust extraction platform.

The antistatic design is the real reason to buy the correct connector instead of a generic sleeve. Festool calls out that antistatic components are only effective when they are used as part of a complete antistatic dust extraction system, including extractors or vacuums, hoses, sleeves, and couplings. In practical terms, this is the right accessory for users who want their dust extraction system built as intended, not just physically connected.

Build-wise, this is a compact plastic connector sleeve with a black finish and a simple tapered form. It is not a flashy part, and that is the point. Accessories like this earn their keep by fitting correctly, holding up in repeated setup changes, and keeping your hose layout organized. At about 6 inches long and roughly 0.3 lbs, it adds very little bulk to the system while giving you more flexibility in how you run your hose.

Compatibility is clearly defined. This Festool accessory is made for Festool D 50, D 36, and D 27 hoses. Festool also notes that when connecting D 27 and D 36 hoses, the reducing sleeve on those hoses must be replaced with a D 36/D 27 rotating adapter. That kind of detail matters because it tells you whether this sleeve alone solves the problem or whether your setup needs one more part to work correctly.

This connector sleeve makes the most sense for Festool users who already own a dust extractor and switch between tools, hose sizes, or work areas. Cabinet installers, remodelers, finish carpenters, shop users, and serious DIYers who care about dust control will get the value right away. If you are already on the Festool dust extraction platform and want a proper hose connection accessory instead of an improvised adapter, this is the right kind of part to keep in the kit.

Festool 493047 Hose Sleeve, Antistatic Connector Sleeve keeps the dust setup honest

This is the kind of small Festool accessory that does not look exciting until you need your hose system to actually work together without a homemade fix.

• Who it's for: Festool users running D 50, D 36, or D 27 hoses who want a cleaner, more flexible dust extraction setup in the shop or on the job.
• Why it stands out: It is purpose-built for Festool hose compatibility and antistatic system use, which matters more than people think when they start mixing hose sizes.
• Worth knowing: This is a single connector sleeve, not a full hose kit, and some D 27 to D 36 setups may need the separate rotating adapter to finish the connection properly.

• What hoses does this connector sleeve fit? It is designed to connect Festool D 50, D 36, and D 27 suction hoses.
• Is this an antistatic accessory? Yes. Festool identifies it as an antistatic connector sleeve.
• Does antistatic performance work by itself? No. Festool states that antistatic components are only effective when used as part of a complete antistatic dust extraction system.
• Do D 27 and D 36 hose connections need anything else? They can. Festool notes that the reducing sleeve on D 27 and D 36 hoses must be replaced with a D 36/D 27 rotating adapter.