Festool Edge Banding Trimmer for Conturo (499896)
Festool Edge Banding Trimmer for Conturo (499896)
Out of Stock - Available to Order - Usually ships in 7-14 days
Product Details
Product Details
Key Features
Overview
The Festool 499896 Edge Banding Trimmer for Conturo is a trimming tool built for finishing edge banding cleanly on cabinet parts, furniture panels, and curved workpieces. This is an edge banding trimmer designed for final trimming of plastic edging and precise alignment at the beginning and end of banding runs. Model Number: 499896. If you do casework or furniture work and want a more repeatable result than a knife-and-file routine, this tool is aimed right at that job.
Its core job is straightforward: trim edge banding up to 2-9/16" (65 mm) high and up to 1/16" (2.0 mm) thick, depending on the material. In practical terms, that means it covers a wide range of common edging sizes used in shop-built cabinetry and finished panel work. The design supports trimming on both the right and left sides, so you are not stuck working around the tool or flipping your process to make a cut.
Where this tool separates itself is curved and circular work. Festool specifically designed it to help align the start and finish of edge banding on round workpieces, which is the kind of detail that can make or break the look of a table or custom panel. It combines impact trimming for round-table style applications and final trimming for panel edges in one machine, so you are not jumping between separate hand methods for different edge shapes.
The handle position is there for a reason. On edge banding, especially thicker plastic edging, control matters more than brute force. The ergonomic handle location helps keep the tool steady and easier to operate through the cut, which can reduce the tendency to overcut, chatter, or leave an uneven transition at the seam. That is the kind of small detail that saves touch-up time later.
Material compatibility is also jobsite and shop relevant. The Festool 499896 Edge Banding Trimmer for Conturo is intended for PVC, acrylic, and thin wooden veneer edging, depending on the material. That makes it a good fit for cabinet shops, millwork, furniture builders, and serious DIY users doing built-ins or custom panels who want cleaner edge banding results without relying on a knife alone. If edge finishing is a regular part of your workflow, this is a purpose-built tool for that step, not a general cutter trying to do the job.
Better Results on Straight and Curved Edges
This edge banding trimmer is built for the part of the job that customers actually see. It helps clean up edging on flat panels and supports circular edging applications where lining up the seam cleanly is usually the fussy part.
- Trims edging from 11/16" to 2-9/16" (18 to 65 mm) high
- Handles edging thickness from 0.020" to 1/16" (0.5 to 2.0 mm), depending on material
- Cuts right and left sides for more flexible workflow at the bench
Key Specifications
| Tool Type | Edge Banding Trimmer |
|---|---|
| Trimming Height | 2-9/16" (65 mm) |
| Trimming Thickness | 1/16" (2.0 mm) |
| Supported Edge Height Range | 11/16" to 2-9/16" (18 to 65 mm) |
| Supported Edge Thickness Range | 0.020" to 1/16" (0.5 to 2.0 mm) depending on material |
| Compatible Materials | PVC, acrylic, and thin wooden veneer edging |
| Weight | 16 oz |
| Made In | Czech Republic |
Built For
Pro Tip
If you are banding a round tabletop or curved panel, use this trimmer to manage the start and finish of the banding run where the seam is most noticeable. That is where the tool earns its keep compared with a knife, because clean alignment at that overlap point is the difference between acceptable and finished.
Tool Nut's Take
Festool 499896 Edge Banding Trimmer for Conturo is for the shop that cares how the last 2 percent looks
This is a purpose-built edge banding trimmer that makes sense when clean seams and repeatable finishing matter more than getting by with a utility knife.
- Who it's for: Cabinetmakers, furniture builders, and detail-focused woodworkers doing regular edge banding work on panels or curved parts.
- Why it stands out: It handles right-side, left-side, and circular edging applications, and it is built specifically to help align the seam on round workpieces.
- Worth knowing: This is not a general-purpose cutter. It is a specialty finishing tool, which means it pays off most when edge banding is a real part of your workflow, not a once-a-year task.
Common Questions
- What is the maximum edge banding height this trimmer can handle? It trims edge banding up to 2-9/16" (65 mm) high.
- What edge banding thickness can it trim? It is rated for up to 1/16" (2.0 mm), with a working range of 0.020" to 1/16" (0.5 to 2.0 mm) depending on material.
- What materials is it designed to trim? It is intended for PVC, acrylic, and thin wooden veneer edging, depending on the material being used.
- Can it be used on curved or circular workpieces? Yes. It is designed for circular edging applications and to help align the beginning and ending of edge banding on round work.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

