Festool Centrotec Pozidrive Bit 2-100 mm 2x (500842)
Festool Centrotec Pozidrive Bit 2-100 mm 2x (500842)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Festool 500842 Centrotec Pozidrive Bit 1/16"-4" (2-100 mm) 2x is a long-shaft Pozidriv fastening bit made for Festool cordless drills using the CENTROTEC interface. This is a screwdriver bit designed for driving Pozidriv screws in hardware, installation, and assembly work. Model number 500842. You get two 100 mm bits in the pack, which makes this a practical pickup for anyone already running Festool drilling and screwdriving gear.
What matters here is not just the tip style or the length, but how the bit works inside the Festool system. Festool calls out the quick-change CENTROTEC setup because it saves time when you are bouncing between drilling pilot holes and driving screws. On cabinet hardware, brackets, slides, and other repetitive fastening work, that quicker changeover keeps the job moving instead of stopping at every switch.
The 4" (100 mm) overall length gives you needed reach without moving to a bulky extension. That makes a real difference when the screw sits down inside hardware channels or where the drill body would otherwise get in the way. Festool also notes that when used in the WH-CE CENTROTEC tool chuck, the projection from the chuck is 2-11/16" (69 mm), which helps reduce the overall working length compared to more cumbersome setups.
Festool specifies a precision milled long shaft, and that is the kind of detail serious users care about. A properly machined bit tracks better in the screw head, feels more controlled under load, and wastes less motion when you are trying to keep the fastener straight. Festool also points out that CENTROTEC bits extend directly into the drill spindle, so the bit behaves more like an extension of the motor. In plain terms, that means better control and a more direct feel when you pull the trigger.
This bit is not locked into one chuck style. It is made for Festool cordless drills with the CENTROTEC interface, but it is also compatible with standard and keyless chucks. That gives you some flexibility if you use Festool as your main platform but still need the bit to work in another drill on the bench or on site.
For the right user, this is a small accessory that solves a very real problem. If you do cabinet installation, hardware fitting, shop assembly, finish work, or general fastening where screw access and speed matter, a dedicated long Pozidriv bit is worth having. If you do not use Pozidriv screws or do not run the CENTROTEC system, this is probably too specific. But if your work already fits that setup, this bit earns its spot fast.
Faster Changeovers for Repetitive Fastening
If you are constantly switching from a drill bit to a screw bit, the CENTROTEC setup is the real advantage here. It cuts downtime between operations and keeps the drill compact in hand.
- Designed for Festool cordless drills with the CENTROTEC interface
- Built to work in the WH-CE CENTROTEC tool chuck for quick bit changes
Reach Recessed Screws Without a Clumsy Setup
The 100 mm length gives you access where short bits come up short, especially around channels, brackets, hinges, and hardware where the drill body crowds the fastener.
- Overall bit length is 4" (100 mm)
- Projection from the WH-CE tool chuck is 2-11/16" (69 mm)
More Direct Feel at the Screw Head
Festool designed these CENTROTEC bits to extend directly into the drill spindle. That tighter connection improves controllability and gives the bit a more direct torque transfer than a bulkier adapter setup.
- Precision milled long shaft for steadier engagement
- Made to improve controllability and torque in Festool CENTROTEC drilling and fastening applications
Works Inside and Outside the Festool Chuck System
This bit is most at home in the Festool CENTROTEC platform, but it is not limited to that. If you need one long Pozidriv bit that can move between your dedicated Festool setup and a standard drill chuck, this one keeps things simple.
- Compatible with standard and keyless chucks
- Pozidriv #2 tip profile for matching fasteners
What's in the Box
- (2) Festool CENTROTEC Pozidriv #2 100 mm bits
Key Specifications
| Bit Type | Pozidriv #2 |
|---|---|
| Length | 4" (100 mm) |
| Pack Quantity | 2 bits |
| Interface | CENTROTEC |
| Chuck Compatibility | Standard and keyless chucks |
| Projection from WH-CE Chuck | 2-11/16" (69 mm) |
Compatibility
Built For
Pro Tip
If you already use the WH-CE CENTROTEC chuck, this 100 mm bit gives you reach without the awkward feel of stacking a short bit into an extra holder. That 2-11/16" (69 mm) projection is the sweet spot for recessed hardware where access matters but control still needs to stay tight.
Warranty & Support
Tool Nut's Take
Festool 500842 Centrotec Pozidrive Bit 1/16"-4" (2-100 mm) 2x Makes Sense for System Users
This is the kind of accessory that looks small on paper but pays for itself fast if you already work in the Festool CENTROTEC platform.
- Who it's for: Pros and serious DIYers doing cabinet installs, hardware work, and repeat fastening with Festool cordless drills.
- Why it stands out: The quick-change CENTROTEC fit, 4" (100 mm) reach, and direct-feeling bit connection make it more useful than a generic long driver bit.
- Worth knowing: This is a specialized Pozidriv bit set, so it is best for users who actually need Pozidriv #2 and want the most out of the Festool chuck system.
Common Questions
- What screw type is this bit made for? It is a Pozidriv #2 bit.
- How long is the bit? The bit measures 4" (100 mm) long.
- Does it only work with FESTOOL CENTROTEC tools? It is designed for Festool cordless drills with the CENTROTEC interface, but Festool also states it is compatible with standard and keyless chucks.
- What is the working projection in the WH-CE CENTROTEC chuck? Festool lists the projection from the WH-CE tool chuck as 2-11/16" (69 mm).

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

