The Festool 576239 Module Edge Router MFK 700 Set is a modular edge router built for precise trimming, edge banding work, and light detail routing. This is a module edge router designed for laminate trimming, edge work, and groove routing in finished materials. Model Number 576239. If you do cabinet installs, shop work, built-ins, or fine finish work, this setup gives you a compact router that can work vertically or horizontally without dragging around a bigger full-size router.

The biggest reason people buy this router is flexibility. Festool built the MFK 700 around tool-free base changes, so you can move from a standard vertical setup to a horizontal setup in a few simple steps. That matters when the job shifts from trimming laminate flush on a panel to cleaning up edge banding on a finished part. Instead of fighting the wrong base orientation or changing tools, you swap bases and keep moving.

The 720 watt motor and variable speed range of 10,000 to 26,000 RPM give the router enough range for common trimming, profiling, and light routing tasks. In plain terms, it has the speed to leave a cleaner cut in delicate materials and the control to avoid burning or chipping when the profile or material changes. Festool also pairs that motor with a detachable Plug-it cord, which is a practical shop feature if you already run other Festool corded tools and want faster setup and easier cord replacement.

Where this router separates itself from a basic laminate trimmer is control. Festool gives it extra-wide vertical and horizontal bases for more support near edges and on narrow stock, plus micro-adjustable depth control down to 1/256 in. That fine adjustment is not just a brochure number. It means you can dial in a flush trim cut, sneak up on inlay depth, or make small corrections without overshooting and ruining a finished edge. Dual locking columns help keep the setting stable while you work.

The design also favors finish quality. The phenolic resin baseplate is made to glide smoothly without marring the work surface, and the threaded insert accepts template guides for more controlled routing tasks. Festool also notes that the attachable feeler bearing lets you use bearing-less bits, which can save money if you already have straight or profile bits you want to run in this setup. For horizontal base use, there is an important limit: do not use a bit with a cutting length greater than 5/8 in. and a shank length greater than 1-13/16 in. Festool recommends a 3/4 in. bit diameter for the greatest range of adjustment in that configuration.

Dust control is another real advantage here. The MFK 700 uses an extraction hood and a 27 mm dust extraction connection to pull chips from the cut zone. On edge work, that does two things: it helps you actually see the line you are trimming, and it keeps debris from being dragged across finished surfaces. If you work with laminate, veneered panels, or prefinished sheet goods, that is not a small detail.

This set is best for cabinetmakers, trim carpenters, millwork shops, and serious woodworkers who need accuracy more than brute force. It is not trying to replace a larger plunge router for heavy mortising or deep profile work. What it does do is make edge routing faster, cleaner, and more predictable, especially when the material is already finished and mistakes are expensive.

A smart edge router for finish work

The Festool 576239 Module Edge Router MFK 700 Set makes a lot of sense for anyone who spends real time trimming edges and wants cleaner results with less setup hassle.

• Who it's for: Cabinet shops, trim carpenters, installers, and woodworkers doing laminate trimming, edge banding, and light detail routing.
• Why it stands out: The modular base system is the whole story here. Switching between vertical and horizontal routing without tools is faster, and the fine depth adjustment gives you the control this kind of finish work demands.
• Worth knowing: This is a precision edge router, not a heavy-duty replacement for a larger plunge router. Stay within the horizontal base bit limits and it will do exactly what it was built to do.

• Can this router be used in both vertical and horizontal positions? Yes. The MFK 700 uses a modular design with tool-free base changes so it can be configured for vertical or horizontal routing.
• What collet sizes does it support? This set includes 1/4 in. and 8 mm collets.
• What is the speed range? The variable speed motor runs from 10,000 to 26,000 RPM.
• Does it support dust extraction? Yes. It has a 27 mm dust extraction connection and includes an extraction hood.
• What is the maximum bit diameter? The maximum bit diameter is 1 in. (26 mm).