Festool HMR 150/4,2 Building/Abrasive Materials Sabre Reciprocating Saw Blade (577492)
Festool HMR 150/4,2 Building/Abrasive Materials Sabre Reciprocating Saw Blade (577492)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Festool 577492 HMR 150/4,2 Reciprocating Saw Blade is a carbide reciprocating saw blade built for cutting abrasive building materials. This is a reciprocating saw blade designed for demolition and cutting jobs in fiber cement, gypsum fiber, plasterboard, aerated concrete, epoxy, and fiber-reinforced plastics. Model Number 577492. If you are burning through standard blades in abrasive stock, this is the upgrade that makes sense.
What sets this blade apart is the carbide construction. Festool calls out high-temperature-resistant carbide for maximum wear resistance in abrasive materials, and that is the real reason to buy it. Abrasive panels and cement-based products eat conventional teeth fast. A blade like this is meant to hold up longer so you spend less time changing blades and less money tossing worn-out steel.
The tooth design matters too. This blade uses cross-set teeth and a 6 teeth-per-inch pitch with a 5/32 inch tooth spacing. In plain terms, that setup is aimed at fast cutting rather than fine finish work. For drywall tear-out, cutting plasterboard panels, or breaking down old assemblies that mix brittle and abrasive material, that more aggressive pattern helps the blade keep moving.
Size is well matched to general demolition and renovation work. The overall blade length is 6 inches, with a 5 inch cutting blade length, 3/4 inch width, and 1/16 inch thickness. That gives you enough usable cutting length for common wall and panel work while keeping the blade manageable in tighter spaces. It is not oversized, and that is a good thing when you are trying to keep the saw under control in awkward tear-out positions.
Festool also keeps the fit straightforward. The universal shank is made for reciprocating saws with an S-shank mount, and Festool specifically lists it as suitable for the RSC 18. That gives you flexibility if you already run the Festool cordless reciprocating saw, but it also means the blade is not locked into a one-tool ecosystem as long as your saw uses the same standard shank style.
On the job, this blade makes the most sense for remodelers, drywall crews, general contractors, and anyone doing selective demolition in abrasive material. It is not the blade you grab for clean finish cuts in wood. It is the one you keep on hand for the ugly work where normal blades get dull in a hurry. If your day includes plasterboard, fiber cement, or reinforced composite material, this blade is built for that exact punishment.
Key Specifications
| Tooth Pitch | 6 TPI |
|---|---|
| Tooth Spacing | 3/16" (4.2 mm) |
| Cutting Blade Length | 5" (125 mm) |
| Overall Length | 6" (150 mm) |
| Width | 3/4" (19 mm) |
| Thickness | 1/16" (1.25 mm) |
| Shank Type | Universal S-shank |
| Blade Material | High-temperature-resistant carbide |
Compatibility
Built For
Pro Tip
Keep the Festool 577492 HMR 150/4,2 Reciprocating Saw Blade for abrasive material work only. If you bounce back and forth between wood and fiber cement with the same demolition blade, you give up the service life this carbide setup is meant to deliver.
Warranty & Support
Tool Nut's Take
Festool 577492 HMR 150/4,2 Reciprocating Saw Blade for abrasive demo work
This is the blade you buy when standard demolition blades are getting smoked by cement-based and fiber-reinforced material.
- Who it's for: Remodelers, drywall crews, and contractors cutting fiber cement, gypsum fiber, plasterboard, and other abrasive building materials.
- Why it stands out: The carbide edge and cross-set tooth design are aimed at long life and fast cutting in stock that usually kills blades early.
- Worth knowing: This is a purpose-built abrasive-material blade, not a general-use wood blade, so it makes the most sense when you keep it for the nasty stuff.
Common Questions
- What materials is this blade made to cut? It is intended for fiber cement, gypsum fiber materials, plasterboard panels, aerated concrete, epoxy, and fiber-reinforced plastics.
- Will it fit only Festool saws? No. Festool states it uses a universal S-shank mount for reciprocating saws with that interface, and it is also specifically listed as suitable for the Festool RSC 18.
- Is this a fast-cutting or finish-cutting blade? This is a fast-cutting reciprocating saw blade with cross-set teeth and a 6 TPI pattern, so it is aimed more at demolition and abrasive material cutting than fine finish work.
- How long is the blade? The blade has a 6 inch overall length with a 5 inch cutting blade length.
Made for Tough, Abrasive Demolition Cuts

The carbide build is the whole story here. When you are cutting abrasive material that strips the teeth off ordinary blades, this one is built to stay in the fight longer.
- High-temperature-resistant carbide for maximum wear resistance
- 6 TPI cross-set tooth pattern for fast cutting in building materials

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

