Festool AV-BHC/KHC Dust Extraction Attachment (577524)
Festool AV-BHC/KHC Dust Extraction Attachment (577524)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Festool 577524 AV-BHC/KHC Dust Extraction Attachment is a dust extraction adapter built for Festool rotary hammers and combi hammers. This is a dust extraction attachment designed for low-dust hammer drilling and chiseling. Model number 577524. If you are drilling anchors, running overhead holes, or doing light chipping inside finished spaces, this attachment helps keep the mess where it belongs instead of all over the room.
What makes this accessory useful is how directly it solves a real jobsite problem. Masonry dust gets everywhere, especially when you are drilling above shoulder height or working in occupied buildings. Festool designed this attachment to connect into the extraction system through a 1-1/16 in. / 1-7/16 in. (27 / 36 mm) dust extraction connection, so you can pull dust right at the point of contact instead of cleaning up after the fact.
The mounting setup is simple on purpose. The AV-BHC/KHC attaches to the depth stop in seconds and uses two clamping points for a secure fit. That means less fiddling around and more drilling. It is also adjustable to drill bit length, and Festool includes components for 4" (100 mm), 6" (150 mm), and 10" (250 mm) working lengths, so you can set it up around the bit you are actually using instead of trying to force one fixed sleeve to do every job.
Festool also paid attention to visibility and finish protection. The transparent, removable sight sleeve gives you a clear view of the drilling point, which matters when you need accurate hole placement in block, concrete, or finished surfaces. The abrasion-resistant material is built to avoid leaving marks on surrounding surfaces, which is a nice detail when you are working in remodels, finished interiors, or customer-occupied spaces.
There is also a practical advantage for overhead work. Festool notes that low-dust ceiling drilling is possible even without an extractor by closing the sleeve with the end cap, allowing the attachment to work like a dust collector. That is not a replacement for full extraction on larger jobs, but it is a smart feature when you need to knock out a few holes and do not want debris raining down on you.
On compatibility, this attachment is suitable for Festool KHC-S 18, KHC 18, and BHC 18 models, and Festool also describes it as suitable for Festool hammer drills and combi hammers using the depth stop arrangement. It is meant to work within the Festool extraction system and can connect to CLEANTEC reducing sleeves. For users already invested in Festool cordless drilling and dust extraction, that system fit is the whole point.
This accessory makes the most sense for remodelers, electricians, mechanical trades, and general contractors who regularly drill in concrete, masonry, or plaster and need to control dust without slowing down. It is not the flashy part of the setup, but it is the kind of add-on that makes the tool more usable indoors, overhead, and in finished environments. If your work involves repeated hammer drilling and cleanup is part of the headache, this is the right kind of problem-solver.
Cleaner Masonry Work
When you are drilling into masonry indoors, dust control is not optional. This attachment captures debris at the hole instead of letting it spread across the room.
- Built for low-dust hammer drilling and chiseling
- Connects into the Festool extraction system through 27 / 1-7/16" (36 mm) dust extraction connections
Works Overhead Too
Ceiling drilling is where loose dust usually becomes a bigger problem. Festool built in a way to close the sleeve with the end cap so the attachment can act as a dust collector when an extractor is not connected.
- Useful for low-dust ceiling drilling
- Helps keep falling debris under better control during overhead work
Fits the Bit You Are Using
A fixed dust shroud only works well with one setup. This one is designed to adapt to different drill bit working lengths, which makes it more useful across day-to-day drilling tasks.
- Supports drill bit diameters from 0 to 0" to 1" (0 to 26 mm)
- Includes components for 4", 6", and 10" (100, 150, and 250 mm) working lengths
Better Visibility at the Hole
Dust control does not help much if you lose sight of the mark. The transparent, removable sleeve keeps the drilling point visible so you can place holes more accurately.
- Clear sight sleeve improves view of the drilling point
- Abrasion-resistant material is designed not to leave marks on surrounding surfaces
What's in the Box
- Dust extraction nozzle for drill bit with working length of 4" (100 mm)
- Dust extraction nozzle for drill bit with working length of 6" (150 mm)
- Connecting piece for drill bit with working length of 10" (250 mm)
- Sight sleeve for viewing the drilling point
Key Specifications
| Category | Dust Extraction Adapter / Attachment |
|---|---|
| Dust Extraction Connection Diameter | 1-1/16 in. / 1-7/16 in. (27 / 36 mm) |
| Gaiter Diameter (Inside / Outside) | 2-1/16 in. / 2-15/16 in. (55 / 75 mm) |
| Drill Bit Diameter Range | 0 - 0" - 1" (0 - 26 mm) |
| Supported Drill Bit Working Lengths | 4", 6", 10" (100, 150, 250 mm) |
| Mounting Method | Attaches to depth stop with two clamping points |
Compatibility
Built For
Pro Tip
If you are drilling overhead and do not have the extractor hooked up, close the sleeve with the end cap first. That lets the attachment work like a dust collector and keeps more debris out of your face during ceiling holes.
Warranty & Support
Tool Nut's Take
Festool 577524 AV-BHC/KHC Dust Extraction Attachment is the kind of add-on that makes a rotary hammer easier to live with
If you already use a Festool hammer drill or combi hammer indoors, this accessory does a very real job: it cuts down the dust without turning setup into a project of its own.
- Who it's for: Pros and serious users drilling concrete, block, or masonry in finished spaces, remodels, and overhead applications.
- Why it stands out: Fast depth-stop mounting, adjustable length for different bits, and a clear sleeve so you can still see the mark.
- Worth knowing: This is an accessory, not a standalone extractor. It really shines when you are already working inside the Festool hammer drill and CLEANTEC extraction setup.
Common Questions
- What tools is this attachment made for? Festool lists it as suitable for KHC-S 18, KHC 18, and BHC 18, and describes it as suitable for Festool hammer drills and combi hammers using the matching depth stop arrangement.
- What drill bit sizes does it support? It supports drill bit diameters from 0 to 0" to 1" (0 to 26 mm).
- Can it be used for overhead drilling? Yes. Festool states it can be used for low-dust ceiling drilling, and the sleeve can be closed with the end cap so it works like a dust collector when an extractor is not connected.
- Does it connect to Festool dust extractors? It is designed to work with the Festool extraction system and connects through a 27 / 1-7/16" (36 mm) dust extraction connection, including use with the CLEANTEC reducing sleeve.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


