Festool Ball Bearing Guide for OFKC 500 Router (490250)
Festool Ball Bearing Guide for OFKC 500 Router (490250)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Festool Steel Ball Bearing Guide for OFK 500 Edge Trimming Cutter, Model 490250, is a replacement bearing guide designed to restore smooth, accurate edge-following performance on compatible Festool trimming setups. This is a ball bearing guide designed for flush trimming and edge trimming in woodworking. If your cutter needs a clean rolling contact point to stay tight to the edge of the material, this part is what makes that happen.
What matters here is control. A worn bearing can lead to rougher tracking, less consistent trimming, and more chance of marking a finished surface. This steel bearing guide gives the cutter a stable contact point so it can ride the edge cleanly while maintaining a consistent reference. In practical terms, that means better control on laminate, cabinetry parts, and finish work where a sloppy edge stands out fast.
Festool built this as a genuine replacement part, not a generic workaround. The precision-machined steel construction is there for a reason: the bearing needs to roll smoothly, stay true, and handle repeated contact without falling apart under normal shop use. The integrated mounting screw also makes replacement straightforward, which is important when you are servicing a cutter and want to get back to work without fighting small hardware.
This part is especially useful for users running edge trimming cutters where finish quality matters more than brute force. On thin edge banding, laminate, and flush-trim applications, the bearing is the part that helps the cutter follow the work instead of wandering. That improves cut quality and helps reduce mistakes on already-finished pieces.
This bearing guide is tied to Festool OFK 500 edge trimming cutter applications, specifically the HW D22/8-OFK cutter. That makes this an accessory and replacement component for a Festool edge trimming system, not a standalone router accessory meant to fit every brand or every bit profile. If you are maintaining a Festool edge trimming setup, using the correct bearing guide matters because fit and tracking are what determine how well the cutter performs.
Who should buy it? Woodworkers, cabinet installers, finish carpenters, and anyone maintaining an OFK 500 edge trimming setup. If you rely on clean flush trimming and want the cutter to track the edge the way it should, this is the kind of small part that makes a real difference. It is not flashy, but it is exactly the sort of replacement component that keeps a good trimming setup working the way you bought it to work.
Keep Trimming Clean and Controlled

A good bearing guide does one job: it gives the cutter a steady, low-friction point of contact so the edge stays true. That is what helps you get more uniform results when trimming laminate, edging, and flush surfaces.
- Designed as a precision replacement bearing guide
- Helps improve routing control and finish quality during edge trimming
Built for Repeat Shop Use

The integrated mounting screw makes this a practical service part, not a headache. When the bearing needs replacement, quick installation means less downtime and a faster return to accurate edge work.
- Precision-machined steel construction for durability
- Integrated clamping screw supports secure installation
What's in the Box
- (1) Ball Bearing Guide
Key Specifications
| Material | Steel |
|---|---|
| Weight (lbs) | 0.4 lbs |
| Length (in) | 0.87 in |
| Width (in) | 1.06 in |
| Height (in) | 0.87 in |
| Compatible Cutter | HW D22/8-OFK |
Compatibility
Built For
Pro Tip
If your flush-trim cut starts feeling less steady or leaves faint marks on finished edges, check the bearing before blaming the cutter. On edge work, a fresh bearing guide can bring back the smooth tracking you were getting when the setup was new.
Warranty & Support
Tool Nut's Take
Small Part, Big Difference in Finish Quality
The Festool Steel Ball Bearing Guide for OFK 500 Edge Trimming Cutter is the kind of replacement part that does not get much attention until the cut quality starts going south.
- Who it's for: Festool users maintaining an OFK 500 edge trimming setup for cabinetry, laminate, and finish work.
- Why it stands out: Genuine Festool fit, steel construction, and an integrated screw make it a straightforward fix for restoring smooth edge-following performance.
- Worth knowing: This is a single replacement bearing guide, not a full cutter or router accessory kit, so make sure you are matching it to the correct Festool trimming setup.
Common Questions
- What is this part used for? It is a replacement ball bearing guide used to help a compatible Festool edge trimming cutter follow the edge of the workpiece during flush trimming and edging tasks.
- What Festool cutter is it designed to fit? It is designed for the Festool HW D22/8-OFK edge trimming cutter.
- Is this a standalone router bit? No. This is a replacement bearing guide component, not a complete router bit or complete router accessory kit.
- What material is it made from? It is a precision-machined steel bearing guide.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


