The Festool ETS EC 125/3 EQ-Plus 5-in. Brushless Random Orbital Sander + CT MIDI I HEPA Dust Extractor Bundle pairs the Festool ETS EC 125/3 EQ-Plus 5-in. Brushless Random Orbital Sander with the Festool CT MIDI I HEPA Dust Extractor, then adds the Festool Granat 5-in. (D125) Abrasives 100-Piece Value Set Systainer3 and the Festool SELFCLEAN Filter Bags for CT MIDI I, 5-Pack. This is a sander and HEPA dust extraction bundle designed for dust-free sanding of wood, paint, primer, filler and solid surface. Model number 576340-578512-578193-204308.

Buying the pieces as one system means the setup works on day one. The extractor's anti-static suction hose connects to the ETS EC 125/3's dust port, the Granat 5-in. (D125) Abrasives 100-Piece Value Set Systainer3 loads the sander with 100 Granat 5-in. discs in five grits, P60 through P220, and the five spare SELFCLEAN bags are sized for the CT MIDI I, so you are not shopping for consumables the first week.

Festool ETS EC 125/3 EQ-Plus 5-in. Brushless Random Orbital Sander

The Festool ETS EC 125/3 EQ-Plus Random Orbital Sander is a 5 inch corded finish sander built for high-quality surface prep and final sanding. This is a random orbital sander designed for fine finish sanding on wood, paint, and other surface materials where control matters more than raw material removal. Model Number 576340. If you spend your day sanding doors, face frames, built-ins, panels, or painted surfaces, this is the kind of tool that earns its keep by staying smooth, light, and predictable.

The big story here is the combination of a brushless motor, a fine 1/8" (3 mm) sanding stroke, and a low-profile body. Festool rates the eccentric motion speed at 6,000 to 10,000 RPM, which gives you a useful speed range for dialing in the cut without turning the tool into a surface-damaging machine. That 3 mm stroke is what makes this sander a finish-first tool. It is meant for superfine sanding and refined surface work where you want to level, blend, and prep without leaving a rough scratch pattern behind.

Festool also got the ergonomics right. The compact body and top grip keep your hand close to the work, which improves feel and reduces fatigue during long sanding sessions. At 3.31 lbs, it stays light enough for vertical work, edge sanding, and overhead touchups without feeling awkward. The low-vibration design and active electronic vibration control are not just comfort features. They help you keep the pad flat, stay consistent, and avoid the arm fatigue that shows up when cheaper sanders start buzzing your hand numb.

Dust collection is a real part of the performance on this tool, not an afterthought. The ETS EC 125/3 EQ-Plus uses Festool Jetstream dust extraction and a 27 mm dust port, so dust is pulled through the pad to keep abrasive surfaces clearer while you work. In practical terms, that means less clogging, less airborne dust around finished spaces, and less chance of trapped debris scratching the workpiece. If you already work with a Festool dust extractor, this sander fits right into that workflow and makes more sense the more finish work you do indoors or in occupied spaces.

Another useful jobsite detail is the integrated pad brake with carbide-tipped components. When you lift the sander off the surface or set it down, the pad stops quickly. That helps reduce the chance of accidental marring on a finished surface and makes the tool feel more controlled between passes. Festool also includes a StickFix soft sanding pad, which speeds up abrasive changes and keeps the tool moving instead of wasting time peeling and reattaching discs that do not hold well.

Because this is a corded 120 VAC machine with a 13.1 ft (4 m) plug-it power cord, it is a good fit for production shops, cabinet installers, trim carpenters, painters, remodelers, and serious woodworkers who value consistent runtime over battery convenience. It is also a strong choice for anyone already invested in the Festool sanding system, since the sander is designed to work as part of a larger setup with matched abrasives, hoses, and extractors.

If your work leans toward final pass sanding, between-coat sanding, painted trim prep, or swirl-sensitive finish work, this tool makes more sense than a more aggressive random orbital sander. It is not trying to be a heavy stock removal machine. It is built for controlled, repeatable finish results, and that is exactly why pros buy it.

For dust-free finish sanding, pair this with the Festool 577874 CLEANTEC CT 36 EI AC AutoClean HEPA Dust Extractor, which auto-adjusts suction to match the sander's speed.

Festool CT MIDI I HEPA Dust Extractor

Festool 578512 CT MIDI I HEPA Bluetooth Dust Extractor is a compact mobile dust extractor built for contractors, installers, finish carpenters, and serious DIY users who need clean work with less hassle. This is a dust extractor designed for on-site dust collection, cleanup, and tool-connected extraction during sanding, routing, sawing, and drilling. Model Number: 578512. If you want a unit that is easy to move but still has the suction and control features that matter on real jobs, this is the lane the CT MIDI I is built for.

The big reason this extractor stands out is how much performance Festool fits into a small platform. With up to 130 CFM of airflow and a maximum vacuum rating of 96 in static water lift, it is built to keep up with common power tool dust collection tasks and final cleanup without feeling underpowered. The suction is adjustable in five levels, which matters when you are switching between tasks like sanding a painted door, trimming material indoors, or drilling where too much suction can fight the tool.

Festool also got the day-to-day usability right here. The touch controls are simple and easy to use, even when you are wearing gloves or working in dusty conditions. The smooth tapered suction hose is designed to reduce snagging, which is a small detail until you are dragging a hose around finished flooring, around sawhorses, or along a guide rail all day. The flat top gives you a usable storage surface, and the integrated hose garage and cord wrap keep the setup from turning into a pile of hose and cable in the van.

Filter access is another practical improvement. The main filter can be replaced from the outside, and the manual filter cleaning function helps restore airflow when the filter or bag starts to load up. In plain terms, that means you can keep suction where it needs to be and use more of the bag capacity before stopping. For anyone doing repeated sanding or punch-list work inside occupied spaces, that is a real time-saver.

Dust control is only half the story. The CT MIDI I HEPA is also set up to work smarter with your tools. The built-in electrical outlet supports tool-triggered auto-on operation for corded tools, so the extractor starts with the tool instead of forcing you to make a second trip. Integrated Bluetooth expands that to certain cordless setups when used with Bluetooth battery packs or an optional remote control. That makes this extractor a better fit for mixed corded and cordless workflows than a basic shop vacuum.

On portability, this unit lands in a very useful middle ground. It is lighter and easier to carry than a larger extractor, but it still gives you a 4.0 gallon container capacity and 3.3 gallon filter bag capacity. The chassis is built for jobsite movement, with large rear wheels, front casters, and a locking brake to keep it planted once you have it where you need it. Festool also integrates the extractor with its Systainer system through the T-LOC connection, which matters if your workflow already revolves around stacked tool storage and mobile setups.

The wet extraction capability adds flexibility, but there is an important detail: wet extraction requires a special wet filter. The built-in LevelStop system shuts the motor down when collecting water to help protect the machine. That makes this more versatile than a dust-only extractor, but it is still clearly optimized for clean, mobile dust extraction around power tools first.

Who should buy it? If you work inside finished spaces, do installation work, punch-list work, cabinet fitting, trim, door prep, flooring, or light remodeling, this Festool dust extractor makes a lot of sense. It is especially good for users who care about mobility, cleaner indoor work, and better integration with cordless and corded tools. If you need maximum debris capacity for heavy demolition, you would step up in size. If you want a compact extractor that travels well and does the job right, this one is right in the sweet spot.

Festool Granat 5-in. (D125) Abrasives 100-Piece Value Set Systainer3

The Festool 578193 Granat D125 Abrasives 100-Piece Value Set Systainer3 is a 5 inch abrasive disc assortment packed in a SYS3 M 112 Systainer for storage, transport, and quick grit changes. This is a sanding disc set designed for surface preparation and finish sanding across painted surfaces, hard substrates, plastics, acrylic, fillers, and repair compounds. Model Number: 578193. If you use a compatible Festool 5" (125 mm) sander and want a clean starting lineup of discs instead of piecing together separate boxes, this set makes sense.

What matters here is the grit spread. You get 20 discs each in P60, P80, P120, P180, and P220, so you can move from heavier material removal into intermediate smoothing and final finish work with one case. For a painter, finisher, or woodworker, that means less guessing about what to order first and fewer interruptions when a job changes halfway through.

Festool SELFCLEAN Filter Bags for CT MIDI I, 5-Pack

The Festool 204308 Self-Cleaning Filter Bags For CT 15 / CT MINI I / CT MIDI I, 5-Pack is a replacement dust extractor filter bag set for select Festool vacuums. This is a dust bag designed for collecting and containing dust and debris during cleanup, sanding, and general extraction work. Model Number 204308. If you use a Festool CT 15, CT MINI I, CT MIDI I, or compatible CTC MINI/MIDI extractor, these bags matter because they help maintain suction while making disposal cleaner and faster.

Who should buy this bundle? Finishers, cabinetmakers, painters and remodelers who sand indoors and want the dust in the bag, not on the floor or in the air. The CT MIDI I is the most compact and portable of the three extractor options, with a 4.0 gal container and 130 CFM of airflow, a good fit for installers who carry the extractor room to room and in and out of the van.

Festool ETS EC 125/3 EQ-Plus 5-in. Brushless Random Orbital Sander

Festool CT MIDI I HEPA Dust Extractor

Festool Granat 5-in. (D125) Abrasives 100-Piece Value Set Systainer3

The sander and the extractor you'd end up buying anyway

The Festool ETS EC 125/3 EQ-Plus 5-in. Brushless Random Orbital Sander + CT MIDI I HEPA Dust Extractor Bundle gets you a complete Festool sander system in one order, with the accessories you would buy next already in the box.

• Who it's for: Finishers, cabinetmakers, painters and remodelers who sand indoors and want the dust in the bag, not on the floor or in the air.
• Why it stands out: The ETS EC 125/3 and the CT MIDI I are built to work together, and the matched Granat Abrasives plus five spare filter bags mean the system is ready to work the day it arrives.
• Worth knowing: The CT MIDI I is the most compact and portable of the three extractor options, with a 4.0 gal container and 130 CFM of airflow, a good fit for installers who carry the extractor room to room and in and out of the van. The same tool is also offered with the other two extractors if you want more capacity or a smaller footprint.

• Is this a corded or cordless sander? It is a corded random orbital sander powered by 120 VAC and supplied with a 13.1 ft (4 m) plug-it power cord.
• What kind of sanding is the 1/8" (3 mm) stroke best for? The 1/8" (3 mm) stroke is best for fine and superfine finish sanding where you want a smoother scratch pattern and more control.
• Is this a HEPA dust extractor? Yes. The CT MIDI I includes a HEPA filter and is described as a HEPA-certified dust extractor.
• Can it start automatically with a tool? Yes. It has a built-in electrical outlet for corded tool auto-start, and it also supports Bluetooth activation with compatible Festool Bluetooth battery packs or an optional remote control.
• Do the spare filter bags fit the extractor in this bundle? Yes. The 204308 SELFCLEAN filter bags are made for the Festool CT MIDI I, the extractor included in this bundle.