The Festool ETS EC 150/3 EQ-Plus 6-in. Brushless Random Orbital Sander + CT 26 EI HEPA Dust Extractor Bundle pairs the Festool ETS EC 150/3 EQ-Plus 6-in. Brushless Random Orbital Sander with the Festool CT 26 EI HEPA Dust Extractor, then adds the Festool Granat 6-in. (D150) Abrasives 120-Piece Value Set Systainer3 and the Festool SELFCLEAN Filter Bags for CT 26, 5-Pack. This is a sander and HEPA dust extraction bundle designed for dust-free sanding of wood, paint, primer, filler and solid surface. Model number 576326-577871-578192-496187.

Buying the pieces as one system means the setup works on day one. The extractor's anti-static suction hose connects to the ETS EC 150/3's dust port, the Granat 6-in. (D150) Abrasives 120-Piece Value Set Systainer3 loads the sander with 120 Granat 6-in. discs in six grits, P60 through P220, and the five spare SELFCLEAN bags are sized for the CT 26, so you are not shopping for consumables the first week.

Festool ETS EC 150/3 EQ-Plus 6-in. Brushless Random Orbital Sander

The Festool ETS EC150/3 EQ-Plus Random Orbital Sander, Model Number 576326, is a compact 6 inch finish sander built for pros who need a high surface quality without fighting tool weight or vibration all day. This is a random orbital sander designed for fine sanding and ultra-fine finish work. If you spend your time prepping panels, sanding between coats, flattening filler, or dialing in painted and clear-coated surfaces, this is the kind of tool that earns its keep fast.

What makes this model matter is the combination of a 3 mm sanding stroke, a 6 inch pad, and controlled speed from 6,000 to 10,000 RPM. In plain terms, that means it is tuned for finish quality, not aggressive stock removal. The shorter stroke helps reduce visible swirl and leaves a more refined scratch pattern, which is exactly what you want before primer, paint, stain, or topcoat. Festool also calls out constant speed under load, so the tool keeps working consistently instead of falling off when you lean into the surface.

The physical design is a big part of the appeal. Festool built this sander with a very low overall height of 4-1/2 inches and a balanced center of gravity, which gives it a planted feel on the workpiece and better control in awkward positions. That matters on vertical panels, overhead work, and edge sanding where a taller top-heavy sander can feel twitchy. The compact body also makes it easier to keep the pad flat, which is one of the simplest ways to get a better finish.

The EC-TEC brushless motor is another real advantage for anyone who sands a lot. Brushless design helps extend motor life and cuts down on maintenance, and Festool pairs it with a sanding pad brake that uses a carbide tip for longer wear. The brake is there for a reason: it helps prevent the pad from over-revving when the tool is first set down, which can reduce gouging and help protect delicate surfaces at the start of a pass. That is one of those features you appreciate more the more finish work you do.

Dust control is also part of the system here. The tool uses a 1-1/16" (27 mm) dust extraction connection and is designed to work with Festool dust extraction setups for cleaner sanding, better visibility, and less cleanup. Cleaner extraction also means abrasive discs stay more effective and the work surface stays easier to read, which helps when you are chasing surface uniformity instead of just removing material. Festool's approach with this tool is not just about the sander by itself, but about building a more controlled sanding process.

From an ergonomic standpoint, the numbers back up what users notice in hand. Festool lists the machine as weighing 3.53 lbs, while other seller copy highlights the very light working feel of the compact design. Either way, this is a light corded sander in the 6 inch class, and that matters on long sanding sessions. The Vibration Control System is aimed directly at smoother operation and reduced fatigue, which is a practical benefit if you are sanding doors, panels, cabinetry parts, automotive surfaces, or overhead pieces for hours at a time.

This sander is sold as an EQ-Plus kit, which means you are getting more than just the bare tool. In the box is the sander, a 6 inch backing pad, the WAF 5 screwdriver, a Plug-it power cord, and a Systainer3 SYS3 M 187 for storage and transport. That matters for shop organization and for anyone already using Festool storage and corded tool systems. The removable Plug-it cord is especially useful in a busy shop where quick pack-up, cord replacement, and tool changes save time.

Who should buy it? Cabinet shops, finish carpenters, painters doing high-end prep, millwork crews, automotive refinishing users, and serious DIYers who care about surface quality will get the most out of it. If your priority is fast heavy stock removal, you would want a more aggressive stroke. If your priority is clean finish sanding, easy handling, and low-fatigue control, the Festool ETS EC150/3 EQ-Plus Random Orbital Sander is right in its lane.

Festool CT 26 EI HEPA Dust Extractor

The Festool 577871 CLEANTEC CT 26 EI HEPA Dust Extractor is a professional jobsite and workshop dust extractor built for cleaner cutting, sanding, and general cleanup. This is a dust extractor designed for dry and wet extraction with tool-triggered operation. Model Number 577871. If you already run Festool saws, sanders, or cordless tools, this unit is built to act like the center of that system instead of just being a vacuum parked in the corner.

What makes the CT 26 EI matter is how it combines usable capacity with real mobility. The 6.9 gal (26 liter) container gives you nearly 7 gallons of room, but the machine still keeps compact dimensions at 25 inches long, 14 inches wide, and 22 inches high. That balance is a big deal on the job because larger extractors can be a pain to move, while smaller ones fill too quickly. Festool landed in the sweet spot here for cabinet work, remodeling, finish carpentry, and shop use.

Suction performance is strong where it counts. The high-performance turbine delivers up to 138 CFM and up to 96 inches of static water lift, which means it can keep up with dust collection at the tool while also handling cleanup duties. The five-level suction adjustment matters just as much as the max number. Being able to back the suction down helps when you are working with sanders or on surfaces where too much pull can fight the tool.

The control layout is more practical than old-school dial-and-switch setups. Festool uses push-button touch controls for straightforward operation, and the extractor supports automatic tool-triggered start for corded power tools. On the cordless side, the built-in Bluetooth interface lets the extractor start automatically with compatible Festool Bluetooth battery packs or an optional remote. That saves steps, keeps dust collection active when it should be, and makes the machine feel like part of the workflow instead of a separate task to manage.

Festool also paid attention to the stuff that usually gets ignored until it annoys you. The anti-static smooth suction hose is designed to reduce snagging and static buildup. The integrated hose holder and cord wrap keep the setup from turning into a mess in the van or at the end of the day. Large wheels make it easier to roll over thresholds and rougher surfaces, while the integrated brake helps keep the extractor from wandering when the hose gets tugged.

As a system machine, the CT 26 EI is set up to do more than collect dust. T-LOC compatibility allows Systainers to attach on top, and it also works as a base for other Festool workflow add-ons like the Pre-separator or Workcenter. That is useful if you want one mobile station carrying the extractor and the tools or accessories needed for the task. In a small shop or a punch-list van, that kind of stackable setup saves space fast.

Filtration is another reason buyers step up to this model. It includes a HEPA main filter plus a SELFCLEAN filter bag, so you are starting with a setup aimed at fine dust control rather than bare-minimum debris pickup. For trades working indoors, especially around finish work, sanding dust, or occupied spaces, that matters. Cleaner air and cleaner floors mean less time on cleanup and less dust spreading through the room you just worked in.

Who should buy it? Pros who want a serious dust extraction setup that works in the shop and on install work. It makes sense for woodworking, finish carpentry, remodeling, interior renovation, and anyone already invested in Festool tools and Systainers. If you just need a basic cleanup vacuum, this is more machine than you need. If you want a dust extractor that integrates into how you actually work, the CT 26 EI is the right kind of upgrade.

Festool Granat 6-in. (D150) Abrasives 120-Piece Value Set Systainer3

The Festool 578192 Granat D150 Abrasives 120-Piece Value Set Systainer3 is a 6 inch sanding disc assortment packed in a Festool SYS3 organizer for disc sanders. This is a sanding disc set designed for surface preparation and finish sanding across paints, fillers, plastics, hard substrates, and wood applications. Model Number 578192. If you use a Festool 6" (150 mm) sander and want a full spread of usable grits in one grab-and-go case, this kit makes a lot of sense.

What makes this set useful is the range. You get six grit steps: P60, P80, P120, P150, P180, and P220, with 20 discs of each. That gives you enough stock to move from heavier material removal into surface prep and finish work without piecing together separate boxes. For painters, finish carpenters, cabinet shops, and remodelers, that means fewer interruptions and a simpler sanding progression when the work changes during the day.

Festool SELFCLEAN Filter Bags for CT 26, 5-Pack

The Festool SC FIS-CT 26/5 SELFCLEAN Filter Bag is a replacement filter bag pack for Festool CT 26 dust extractors. This is a dust extractor filter bag designed for collecting fine dust and debris while helping the vacuum maintain strong airflow. Model Number 496187. If you run a CT 26 in the shop or on site, this is the bag setup that makes the extractor work the way it is supposed to.

Who should buy this bundle? Finishers, cabinetmakers, painters and remodelers who sand indoors and want the dust in the bag, not on the floor or in the air. The CT 26 EI is the middle option, with a 6.9 gal (26 L) container and 138 CFM of airflow, balancing capacity and mobility for shop and jobsite work.

Festool ETS EC 150/3 EQ-Plus 6-in. Brushless Random Orbital Sander

Festool CT 26 EI HEPA Dust Extractor

Festool Granat 6-in. (D150) Abrasives 120-Piece Value Set Systainer3

The sander and the extractor you'd end up buying anyway

The Festool ETS EC 150/3 EQ-Plus 6-in. Brushless Random Orbital Sander + CT 26 EI HEPA Dust Extractor Bundle gets you a complete Festool sander system in one order, with the accessories you would buy next already in the box.

• Who it's for: Finishers, cabinetmakers, painters and remodelers who sand indoors and want the dust in the bag, not on the floor or in the air.
• Why it stands out: The ETS EC 150/3 and the CT 26 are built to work together, and the matched Granat Abrasives plus five spare filter bags mean the system is ready to work the day it arrives.
• Worth knowing: The CT 26 EI is the middle option, with a 6.9 gal (26 L) container and 138 CFM of airflow, balancing capacity and mobility for shop and jobsite work. The same tool is also offered with the other two extractors if you want more capacity or a smaller footprint.

• What kind of sanding is this model best for? It is best for fine and ultra-fine sanding where surface quality matters, thanks to the 3 mm stroke and finish-focused random orbital action.
• Is this a corded or cordless sander? It is a corded sander that runs on 120 VAC and includes a Plug-it power cord.
• Can this extractor handle wet and dry pickup? Yes. Festool lists the CT 26 EI HEPA as ideal for dry and wet extraction.
• Does it support automatic start with tools? Yes. It is designed for automatic tool-triggered operation with corded power tools, and the built-in Bluetooth also supports automatic start from compatible Festool cordless tools or an optional remote.
• Do the spare filter bags fit the extractor in this bundle? Yes. The 496187 SELFCLEAN filter bags are made for the Festool CT 26, the extractor included in this bundle.