Festool HLC 82 EB-Basic 18V Cordless Planer with Systainer, Tool Only (578001)
Festool HLC 82 EB-Basic 18V Cordless Planer with Systainer, Tool Only (578001)
In Stock - Ready to Ship
Product Details
Product Details
Key Features
Overview
The Festool HLC 82 EB-Basic 18V Cordless Planer with Systainer (578001) is a battery-powered hand planer for carpenters, door installers, remodelers, and woodworkers who need clean surfaces, accurate rebates, and crisp chamfers on site. This is a cordless planer designed for fitting doors, flattening and sizing boards, cutting rebates, and chamfering beams and timbers. Model Number 578001 is the Basic version: tool, fence, and Systainer, with batteries and charger sold separately.
The cut is what sets the HLC 82 apart. Most hand planers use straight knives that strike the wood square on. Festool uses a spiral blade set at an incline, which slices the fibers in a pulling cut. You get a smoother surface with fewer planing marks, less tear-out, and less sanding afterward, and the spiral design runs quieter too. When the edge finally dulls, the Festool 82 mm spiral planer blade swaps in to get it back to a factory cut.
Planing width is 3-1/4" (82 mm), and chip depth adjusts from 0 to 3/32" (2.5 mm). You can change depth mid-cut, so a heavy first pass and a light finishing pass happen without stopping. The cutterhead spins at 11,500 RPM, and the brushless EC-TEC motor keeps that speed up even at maximum depth. When you let go of the trigger, the brake stops the cutterhead in under two seconds, which keeps a coasting blade from marking the work as you lift off.
Rebate capacity is where this planer earns its keep. Maximum rebate depth is 1" (25 mm), and the included Festool HLC 82 parallel side fence sets rebate width and keeps the planer square to the edge. For repeat rebates at an exact depth, add the Festool FA-EHL rebate depth stop; with the stop installed, maximum rebate depth is 7/8" (23 mm).
The handle layout is built for control. Soft-grip surfaces and extra grip points give you a solid hold whether you are planing flat on a bench or working a door edge on its side. The tool weighs 5.95 lbs (2.7 kg) without a battery, light enough for one-handed control on short passes.
Chamfering is built into the shoe. Three 90-degree V-grooves in the planer foot ride the corner of a board or beam, so the chamfer stays straight and even along the full length. For long chamfers on beams and square timbers, the Festool HLC 82 chamfer adaptor adds a wider, more stable bearing surface.
Chip handling is flexible. The extraction hose connects on either the left or right side, so it stays out of your way no matter which direction you are working. Two extraction channels let you choose: the long channel for use with a dust extractor, or the included short channel for heavy, continuous chip ejection when extraction is not practical. The extraction port is 1-7/16" (36 mm).
The HLC 82 runs on any Festool 18V battery pack except the Ergopack. Festool recommends the 5.0 Ah or 8.0 Ah HighPower packs for maximum runtime and power when planing at full depth. If you are new to the platform, Festool batteries and chargers are sold separately from this Basic kit.
Who should buy it? Finish carpenters and door installers who fit doors and scribe trim, timber framers and deck builders who chamfer beams, and woodworkers who want a planer that leaves a surface close to ready for finish. If you already own Festool 18V batteries, the Basic kit is the cheapest way in.
A Smoother Surface Off the Planer
The inclined spiral blade slices instead of chops, so the board comes off cleaner and needs less sanding before finish.
- 3-1/4" (82 mm) planing width
- 11,500 RPM cutterhead speed
Beams, Rafters, and Timbers On Site
No cord means you can plane a rafter tail or beam where it sits. The V-grooves in the shoe keep chamfers straight along the full length.
- Three integrated 90-degree V-grooves
- Runs on Festool 18V packs, except Ergopack
Rebates Up to 1" Deep
The parallel side fence sets the width and keeps the planer square to the edge, so rebates come out consistent from end to end.
- Maximum rebate depth 1" (25 mm)
- 7/8" (23 mm) with the optional rebate depth stop
Chips Go Where You Want Them
Run it on a dust extractor inside a finished room, or switch to the short channel for fast chip ejection outdoors.
- Hose connects on the left or right side
- Long and short extraction channels
What's in the Box
- (1) Festool HLC 82 EB-Basic cordless planer
- (1) Parallel side fence PA-HLC 82/EHL 65
- (1) Hex key
- (1) Short extraction channel
- (1) Systainer3 SYS3 M 237
Batteries and charger sold separately. Chamfer adaptor and rebate depth stop sold separately.
At a Glance
Key Specifications
|
|
18 V |
|---|---|
|
|
Brushless EC-TEC |
|
|
11,500 RPM |
|
|
3-1/4" (82 mm) |
|
|
0 to 3/32" (0 to 2.5 mm) |
|
|
1" (25 mm); 7/8" (23 mm) with stop |
|
|
1-7/16" (36 mm) |
|
|
Stops cutterhead in under 2 seconds |
|
|
5.95 lbs (2.7 kg) |
|
|
No (tool only with Systainer) |
Compatibility
Built For
Pro Tip
When fitting a door, take the heavy passes at full depth, then dial the depth down mid-pass for the last cut. You don't have to stop and reset, and the final light pass with the spiral blade leaves a clean edge.
Warranty & Support
Tool Nut's Take
The Festool HLC 82 EB-Basic 18V Cordless Planer Is a Finish Planer, Not a Hog
If you care about the surface you leave behind, the spiral blade is worth the upgrade over a straight-knife planer.
- Who it's for: Door installers, finish carpenters, timber framers, and woodworkers already running Festool 18V batteries.
- Why it stands out: Spiral-blade finish, 1" (25 mm) rebate depth, built-in chamfer grooves, and a brake that stops the cutterhead in under two seconds.
- Worth knowing: This is the Basic kit. No battery or charger, and the chamfer adaptor and rebate depth stop are extra.
Common Questions
- Does this come with a battery? No. The 578001 Basic kit includes the planer, parallel side fence, hex key, short extraction channel, and Systainer. Batteries and charger are sold separately.
- Which batteries does it use? Any Festool 18V battery pack except the Ergopack. Festool recommends 5.0 Ah or 8.0 Ah HighPower packs.
- How deep a rebate can it cut? Up to 1" (25 mm), or 7/8" (23 mm) with the rebate depth stop installed.
- Can the dust hose go on either side? Yes. The extraction hose connects on the left or right.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

