The Festool RO 125 FEQ-Plus Rotex 5-in. Multi-Mode Sander + CT MIDI I HEPA Dust Extractor Bundle pairs the Festool RO 125 FEQ-Plus Rotex 5-in. Multi-Mode Sander with the Festool CT MIDI I HEPA Dust Extractor, then adds the Festool Granat 5-in. (D125) Abrasives 100-Piece Value Set Systainer3 and the Festool SELFCLEAN Filter Bags for CT MIDI I, 5-Pack. This is a sander and HEPA dust extraction bundle designed for dust-free sanding of wood, paint, primer, filler and solid surface. Model number 576032-578512-578193-204308.

Buying the pieces as one system means the setup works on day one. The extractor's anti-static suction hose connects to the RO 125's dust port, the Granat 5-in. (D125) Abrasives 100-Piece Value Set Systainer3 loads the sander with 100 Granat 5-in. discs in five grits, P60 through P220, and the five spare SELFCLEAN bags are sized for the CT MIDI I, so you are not shopping for consumables the first week.

Festool RO 125 FEQ-Plus Rotex 5-in. Multi-Mode Sander

The Festool 576032 RO 125 FEQ-Plus Rotex 5" (125 mm) Multi-Mode Sander w/ Systainer3 is a compact corded sanding and polishing tool built for users who need one machine to handle rough stock removal, finish sanding, and polishing. This is a multi-mode sander designed for fast material removal, fine surface prep, and polishing on wood and similar finished surfaces. Model Number: 576032.

What makes this sander different is the ROTEX system. In the gear-driven mode, it cuts aggressively for stripping finishes, flattening surfaces, and removing material quickly. Switch to random orbital mode and it becomes a finish sander for finer surface work. Festool also calls it a triple-function tool because it can polish as well, which matters if you want one machine that can move from prep to finish work without dragging multiple sanders onto the bench.

The motor is rated at 500 watts and the speed range is broad enough to cover both heavy and controlled work. ROTEX rotary motion runs at 300 to 600 RPM, while eccentric motion runs from 3,000 to 6,000 RPM. On the job, that means you can lean on it when you need faster stock removal, then back down and refine the surface when the goal is a cleaner final pass. The 1/8" (3.6 mm) sanding stroke helps balance removal rate with surface quality, which is why this model lands in that useful middle ground between a dedicated heavy remover and a dedicated finish-only sander.

The size is a big part of the appeal. With a 5" (125 mm) FastFix pad and a compact body, the RO 125 is easier to maneuver than a larger dual-mode sander, especially on vertical panels, cabinet parts, tabletops, and tighter working areas. Festool also highlights its ergonomic shape and multiple grip positions, and you can see why from the body design. It gives you a secure front-hand grip for control and a rear hold that keeps the machine planted when you need to work flat and steady.

Dust control is one of the reasons people buy into Festool in the first place, and this model is built around that idea. The Jetstream dust extraction design is there to pull dust away efficiently, which helps keep the abrasive cutting cleaner instead of loading up fast. Better dust collection is not just about keeping the shop cleaner. It helps you see the scratch pattern, reduces cleanup, and can extend the life of both abrasives and the pad. The dust extraction connection diameter is 1-1/16" (27 mm), which matters if you are pairing it with a hose and extractor setup.

The RO 125 also focuses on jobsite practicality. The FastFix tool-free backing pad system lets you change pads quickly to match the task, so you are not wasting time wrestling with hardware when moving from heavier sanding to a more delicate surface. Festool also notes an integrated pad brake and an edge protector. Those details matter when you are working near adjacent surfaces or when you want to avoid marring the workpiece as the pad spins down.

As a corded tool, this sander runs on 120 VAC and includes Festool's Plug-It power cord system. That detachable cord setup is useful if you already run multiple Festool corded tools because it speeds up changeover and keeps cord management simpler at the bench or on site. It also ships in a Systainer3, which is more than packaging. It keeps the tool, cord, protector, and pad together so the sander is easier to store, transport, and stack with the rest of a Festool setup.

Who is this for? Woodworkers, painters, solid surface fabricators, remodelers, and finish-focused trades who need one compact sander that can do more than one job well. If your work regularly moves from paint removal or heavier prep into finish sanding on the same project, the RO 125 makes a lot of sense. If all you need is a light finish sander, it may be more tool than necessary. But if you want versatility in a compact 5 inch platform, this is the kind of machine that earns its space fast.

Festool CT MIDI I HEPA Dust Extractor

Festool 578512 CT MIDI I HEPA Bluetooth Dust Extractor is a compact mobile dust extractor built for contractors, installers, finish carpenters, and serious DIY users who need clean work with less hassle. This is a dust extractor designed for on-site dust collection, cleanup, and tool-connected extraction during sanding, routing, sawing, and drilling. Model Number: 578512. If you want a unit that is easy to move but still has the suction and control features that matter on real jobs, this is the lane the CT MIDI I is built for.

The big reason this extractor stands out is how much performance Festool fits into a small platform. With up to 130 CFM of airflow and a maximum vacuum rating of 96 in static water lift, it is built to keep up with common power tool dust collection tasks and final cleanup without feeling underpowered. The suction is adjustable in five levels, which matters when you are switching between tasks like sanding a painted door, trimming material indoors, or drilling where too much suction can fight the tool.

Festool also got the day-to-day usability right here. The touch controls are simple and easy to use, even when you are wearing gloves or working in dusty conditions. The smooth tapered suction hose is designed to reduce snagging, which is a small detail until you are dragging a hose around finished flooring, around sawhorses, or along a guide rail all day. The flat top gives you a usable storage surface, and the integrated hose garage and cord wrap keep the setup from turning into a pile of hose and cable in the van.

Filter access is another practical improvement. The main filter can be replaced from the outside, and the manual filter cleaning function helps restore airflow when the filter or bag starts to load up. In plain terms, that means you can keep suction where it needs to be and use more of the bag capacity before stopping. For anyone doing repeated sanding or punch-list work inside occupied spaces, that is a real time-saver.

Dust control is only half the story. The CT MIDI I HEPA is also set up to work smarter with your tools. The built-in electrical outlet supports tool-triggered auto-on operation for corded tools, so the extractor starts with the tool instead of forcing you to make a second trip. Integrated Bluetooth expands that to certain cordless setups when used with Bluetooth battery packs or an optional remote control. That makes this extractor a better fit for mixed corded and cordless workflows than a basic shop vacuum.

On portability, this unit lands in a very useful middle ground. It is lighter and easier to carry than a larger extractor, but it still gives you a 4.0 gallon container capacity and 3.3 gallon filter bag capacity. The chassis is built for jobsite movement, with large rear wheels, front casters, and a locking brake to keep it planted once you have it where you need it. Festool also integrates the extractor with its Systainer system through the T-LOC connection, which matters if your workflow already revolves around stacked tool storage and mobile setups.

The wet extraction capability adds flexibility, but there is an important detail: wet extraction requires a special wet filter. The built-in LevelStop system shuts the motor down when collecting water to help protect the machine. That makes this more versatile than a dust-only extractor, but it is still clearly optimized for clean, mobile dust extraction around power tools first.

Who should buy it? If you work inside finished spaces, do installation work, punch-list work, cabinet fitting, trim, door prep, flooring, or light remodeling, this Festool dust extractor makes a lot of sense. It is especially good for users who care about mobility, cleaner indoor work, and better integration with cordless and corded tools. If you need maximum debris capacity for heavy demolition, you would step up in size. If you want a compact extractor that travels well and does the job right, this one is right in the sweet spot.

Festool Granat 5-in. (D125) Abrasives 100-Piece Value Set Systainer3

The Festool 578193 Granat D125 Abrasives 100-Piece Value Set Systainer3 is a 5 inch abrasive disc assortment packed in a SYS3 M 112 Systainer for storage, transport, and quick grit changes. This is a sanding disc set designed for surface preparation and finish sanding across painted surfaces, hard substrates, plastics, acrylic, fillers, and repair compounds. Model Number: 578193. If you use a compatible Festool 5" (125 mm) sander and want a clean starting lineup of discs instead of piecing together separate boxes, this set makes sense.

What matters here is the grit spread. You get 20 discs each in P60, P80, P120, P180, and P220, so you can move from heavier material removal into intermediate smoothing and final finish work with one case. For a painter, finisher, or woodworker, that means less guessing about what to order first and fewer interruptions when a job changes halfway through.

Festool SELFCLEAN Filter Bags for CT MIDI I, 5-Pack

The Festool 204308 Self-Cleaning Filter Bags For CT 15 / CT MINI I / CT MIDI I, 5-Pack is a replacement dust extractor filter bag set for select Festool vacuums. This is a dust bag designed for collecting and containing dust and debris during cleanup, sanding, and general extraction work. Model Number 204308. If you use a Festool CT 15, CT MINI I, CT MIDI I, or compatible CTC MINI/MIDI extractor, these bags matter because they help maintain suction while making disposal cleaner and faster.

Who should buy this bundle? Finishers, cabinetmakers, painters and remodelers who sand indoors and want the dust in the bag, not on the floor or in the air. The CT MIDI I is the most compact and portable of the three extractor options, with a 4.0 gal container and 130 CFM of airflow, a good fit for installers who carry the extractor room to room and in and out of the van.

Festool RO 125 FEQ-Plus Rotex 5-in. Multi-Mode Sander

Festool CT MIDI I HEPA Dust Extractor

Festool Granat 5-in. (D125) Abrasives 100-Piece Value Set Systainer3

The sander and the extractor you'd end up buying anyway

The Festool RO 125 FEQ-Plus Rotex 5-in. Multi-Mode Sander + CT MIDI I HEPA Dust Extractor Bundle gets you a complete Festool sander system in one order, with the accessories you would buy next already in the box.

• Who it's for: Finishers, cabinetmakers, painters and remodelers who sand indoors and want the dust in the bag, not on the floor or in the air.
• Why it stands out: The RO 125 and the CT MIDI I are built to work together, and the matched Granat Abrasives plus five spare filter bags mean the system is ready to work the day it arrives.
• Worth knowing: The CT MIDI I is the most compact and portable of the three extractor options, with a 4.0 gal container and 130 CFM of airflow, a good fit for installers who carry the extractor room to room and in and out of the van. The same tool is also offered with the other two extractors if you want more capacity or a smaller footprint.

• Is this a corded or cordless sander? It is a corded 120 VAC sander and includes a Festool Plug-It power cord.
• Can this tool do more than finish sanding? Yes. It is designed for coarse sanding, fine sanding, and polishing.
• Is this a HEPA dust extractor? Yes. The CT MIDI I includes a HEPA filter and is described as a HEPA-certified dust extractor.
• Can it start automatically with a tool? Yes. It has a built-in electrical outlet for corded tool auto-start, and it also supports Bluetooth activation with compatible Festool Bluetooth battery packs or an optional remote control.
• Do the spare filter bags fit the extractor in this bundle? Yes. The 204308 SELFCLEAN filter bags are made for the Festool CT MIDI I, the extractor included in this bundle.