The Festool TS 75 EQ-F-Plus Plunge Cut Track Saw + CT 26 EI HEPA Dust Extractor Bundle pairs the Festool TS 75 EQ-F-Plus Plunge Cut Track Saw with the Festool CT 26 EI HEPA Dust Extractor, then adds the Festool FS 1900/2 75-in. Guide Rail and the Festool SELFCLEAN Filter Bags for CT 26, 5-Pack. This is a plunge cut track saw and HEPA dust extraction bundle designed for straight, splinter-free cuts in sheet goods, doors and solid lumber. Model number 576118-577871-491503-496187.

Buying the pieces as one system means the setup works on day one. The extractor's anti-static suction hose connects to the TS 75's dust port, the FS 1900/2 75-in. Guide Rail gives the saw a 75-in. cutting reference for full-width crosscuts and longer rips, and the five spare SELFCLEAN bags are sized for the CT 26, so you are not shopping for consumables the first week.

Festool TS 75 EQ-F-Plus Plunge Cut Track Saw

The Festool TS 75 EQ-F-Plus Plunge Cut Track Saw is a corded plunge-cut track saw built for high-accuracy cutting in sheet goods, thick wood stock, doors, and rough lumber. This is a track saw designed for straight, splinter-free plunge cutting and clean edge work. Model Number 576118, this saw is the heavier-cutting option in Festool's track saw lineup for users who need more depth of cut than a smaller plunge saw can offer.

The big story here is capacity. With a maximum cutting depth of 3 in. and 2-1/8 in. at 45 degrees, the TS 75 is set up for thicker materials that can slow down lighter saws. Festool pairs that depth with a 1,600 watt motor and a variable no-load speed range of 1,350 to 4,400 RPM, so you can better match blade speed to the material and type of cut. That matters when you want a cleaner edge in plywood, hardwood, or laminated stock without burn marks or tear-out.

Used on a Festool guide rail, this saw is built to deliver the kind of straight, repeatable cut that normally takes more setup on a table saw or panel saw. That is a big deal on remodel jobs, built-in work, cabinet installs, and shop tasks where moving a full sheet is more hassle than moving the saw. Festool also calls out the ability to cut stacked sheet goods in one pass, which saves real time when you are batching panels and want matching parts without building jigs.

The saw is engineered around control and cut quality, not just raw power. Dual splinterguards help reduce tear-out, and the plunge design makes it easier to start cuts exactly where you need them for cutouts and interior openings. The flat housing also helps with flush cutting, which makes the saw more useful in tight edge situations where a standard circular saw body gets in the way.

On the safety and jobsite-practicality side, the TS 75 uses a spring-loaded riving knife to keep the kerf open and reduce the chance of the blade getting pinched in the material. Festool also adds a slip clutch to help minimize kickback risk and reduce wear on the blade, gear case, and motor when the cut gets demanding. For blade swaps, the FastFix system locks the switch and arbor at the same time, which makes blade changes quicker and more controlled.

Dust control is another strong point. The saw includes dust extraction capability with a 1-1/16" (27 mm) / 1-7/16" (36 mm) dust port connection, which helps keep the cut line visible and cleanup to a minimum. That matters even more when you are working inside an occupied home, finished interior, or customer space where controlling dust is part of doing the job right, not an extra.

The system fit is also important. This is not a standalone circular saw meant to be used any which way. It is part of the Festool cutting system and is designed to work with Festool guide rails for straight, splinter-free performance. The saw comes with a Plug it power cord and packs into a Systainer3 SYS3 M 437 for transport and storage. One thing to know up front: the guide rail is sold separately, so if you want the full track saw advantage, plan on pairing it with the right rail length for your work.

Who should buy it? This saw makes the most sense for cabinet installers, trim carpenters, remodelers, finish crews, and serious woodworkers who cut a lot of large panels or thicker stock and want portable accuracy. If you mostly break down thin sheet goods, a smaller track saw may be enough. If you need more depth, cleaner cuts, and a system that travels to the job instead of dragging material back to the shop, the TS 75 earns its keep fast.

This saw shares its guide rail system with the rest of the Festool track saw lineup, so adding a second saw or a shorter rail later stays simple.

Festool CT 26 EI HEPA Dust Extractor

The Festool 577871 CLEANTEC CT 26 EI HEPA Dust Extractor is a professional jobsite and workshop dust extractor built for cleaner cutting, sanding, and general cleanup. This is a dust extractor designed for dry and wet extraction with tool-triggered operation. Model Number 577871. If you already run Festool saws, sanders, or cordless tools, this unit is built to act like the center of that system instead of just being a vacuum parked in the corner.

What makes the CT 26 EI matter is how it combines usable capacity with real mobility. The 6.9 gal (26 liter) container gives you nearly 7 gallons of room, but the machine still keeps compact dimensions at 25 inches long, 14 inches wide, and 22 inches high. That balance is a big deal on the job because larger extractors can be a pain to move, while smaller ones fill too quickly. Festool landed in the sweet spot here for cabinet work, remodeling, finish carpentry, and shop use.

Suction performance is strong where it counts. The high-performance turbine delivers up to 138 CFM and up to 96 inches of static water lift, which means it can keep up with dust collection at the tool while also handling cleanup duties. The five-level suction adjustment matters just as much as the max number. Being able to back the suction down helps when you are working with sanders or on surfaces where too much pull can fight the tool.

The control layout is more practical than old-school dial-and-switch setups. Festool uses push-button touch controls for straightforward operation, and the extractor supports automatic tool-triggered start for corded power tools. On the cordless side, the built-in Bluetooth interface lets the extractor start automatically with compatible Festool Bluetooth battery packs or an optional remote. That saves steps, keeps dust collection active when it should be, and makes the machine feel like part of the workflow instead of a separate task to manage.

Festool also paid attention to the stuff that usually gets ignored until it annoys you. The anti-static smooth suction hose is designed to reduce snagging and static buildup. The integrated hose holder and cord wrap keep the setup from turning into a mess in the van or at the end of the day. Large wheels make it easier to roll over thresholds and rougher surfaces, while the integrated brake helps keep the extractor from wandering when the hose gets tugged.

As a system machine, the CT 26 EI is set up to do more than collect dust. T-LOC compatibility allows Systainers to attach on top, and it also works as a base for other Festool workflow add-ons like the Pre-separator or Workcenter. That is useful if you want one mobile station carrying the extractor and the tools or accessories needed for the task. In a small shop or a punch-list van, that kind of stackable setup saves space fast.

Filtration is another reason buyers step up to this model. It includes a HEPA main filter plus a SELFCLEAN filter bag, so you are starting with a setup aimed at fine dust control rather than bare-minimum debris pickup. For trades working indoors, especially around finish work, sanding dust, or occupied spaces, that matters. Cleaner air and cleaner floors mean less time on cleanup and less dust spreading through the room you just worked in.

Who should buy it? Pros who want a serious dust extraction setup that works in the shop and on install work. It makes sense for woodworking, finish carpentry, remodeling, interior renovation, and anyone already invested in Festool tools and Systainers. If you just need a basic cleanup vacuum, this is more machine than you need. If you want a dust extractor that integrates into how you actually work, the CT 26 EI is the right kind of upgrade.

Festool FS 1900/2 75-in. Guide Rail

Festool 491503 75" Guide Rail FS 1900 is a precision cutting guide for tradespeople and serious woodworkers who want straight, clean cuts without fighting layout every time. This is a guide rail designed for straight, splinter-free cuts with compatible Festool plunge saws, routers, and jigsaws. Model Number: 491503. At 75 inches long, it gives you the reach needed for full-size panels, long rip cuts, and repeatable trim work while keeping the tool tracking where it should.

The big advantage here is speed with accuracy. Festool builds the FS 1900 with an integrated splinterguard that aligns to the cut line, so you are not guessing where the blade will land. On the job, that saves setup time and helps reduce tear-out both with the grain and across it. Festool also notes that when paired with a Festool TS plunge cut saw, this rail supports precision cuts up to 69 inches long, which makes it a strong fit for cabinet parts, sheet goods, and finish work that cannot afford sloppy edges.

Festool SELFCLEAN Filter Bags for CT 26, 5-Pack

The Festool SC FIS-CT 26/5 SELFCLEAN Filter Bag is a replacement filter bag pack for Festool CT 26 dust extractors. This is a dust extractor filter bag designed for collecting fine dust and debris while helping the vacuum maintain strong airflow. Model Number 496187. If you run a CT 26 in the shop or on site, this is the bag setup that makes the extractor work the way it is supposed to.

Who should buy this bundle? Cabinet installers, remodelers, flooring crews and woodworkers who break down sheet goods and want clean, accurate cuts without a cloud of dust. The CT 26 EI is the middle option, with a 6.9 gal (26 L) container and 138 CFM of airflow, balancing capacity and mobility for shop and jobsite work.

Festool TS 75 EQ-F-Plus Plunge Cut Track Saw

Festool CT 26 EI HEPA Dust Extractor

Festool FS 1900/2 75-in. Guide Rail

Saw, rail and extraction in one order

The Festool TS 75 EQ-F-Plus Plunge Cut Track Saw + CT 26 EI HEPA Dust Extractor Bundle gets you a complete Festool plunge cut track saw system in one order, with the accessories you would buy next already in the box.

• Who it's for: Cabinet installers, remodelers, flooring crews and woodworkers who break down sheet goods and want clean, accurate cuts without a cloud of dust.
• Why it stands out: The TS 75 and the CT 26 are built to work together, and the matched 75-in. Guide Rail plus five spare filter bags mean the system is ready to work the day it arrives.
• Worth knowing: The CT 26 EI is the middle option, with a 6.9 gal (26 L) container and 138 CFM of airflow, balancing capacity and mobility for shop and jobsite work. The same tool is also offered with the other two extractors if you want more capacity or a smaller footprint.

• What kind of saw is this? This is a corded plunge cut track saw designed for straight, splinter-free cutting when used with Festool guide rails.
• How deep can it cut? The maximum cutting depth is 3" (75 mm), and cutting depth at 45 degrees is 2-3/16" (55 mm).
• Can this extractor handle wet and dry pickup? Yes. Festool lists the CT 26 EI HEPA as ideal for dry and wet extraction.
• Does it support automatic start with tools? Yes. It is designed for automatic tool-triggered operation with corded power tools, and the built-in Bluetooth also supports automatic start from compatible Festool cordless tools or an optional remote.
• Do the spare filter bags fit the extractor in this bundle? Yes. The 496187 SELFCLEAN filter bags are made for the Festool CT 26, the extractor included in this bundle.