The Festool TS 75 EQ-F-Plus Plunge Cut Track Saw + CT MIDI I HEPA Dust Extractor Bundle pairs the Festool TS 75 EQ-F-Plus Plunge Cut Track Saw with the Festool CT MIDI I HEPA Dust Extractor, then adds the Festool FS 1900/2 75-in. Guide Rail and the Festool SELFCLEAN Filter Bags for CT MIDI I, 5-Pack. This is a plunge cut track saw and HEPA dust extraction bundle designed for straight, splinter-free cuts in sheet goods, doors and solid lumber. Model number 576118-578512-491503-204308.

Buying the pieces as one system means the setup works on day one. The extractor's anti-static suction hose connects to the TS 75's dust port, the FS 1900/2 75-in. Guide Rail gives the saw a 75-in. cutting reference for full-width crosscuts and longer rips, and the five spare SELFCLEAN bags are sized for the CT MIDI I, so you are not shopping for consumables the first week.

Festool TS 75 EQ-F-Plus Plunge Cut Track Saw

The Festool TS 75 EQ-F-Plus Plunge Cut Track Saw is a corded plunge-cut track saw built for high-accuracy cutting in sheet goods, thick wood stock, doors, and rough lumber. This is a track saw designed for straight, splinter-free plunge cutting and clean edge work. Model Number 576118, this saw is the heavier-cutting option in Festool's track saw lineup for users who need more depth of cut than a smaller plunge saw can offer.

The big story here is capacity. With a maximum cutting depth of 3 in. and 2-1/8 in. at 45 degrees, the TS 75 is set up for thicker materials that can slow down lighter saws. Festool pairs that depth with a 1,600 watt motor and a variable no-load speed range of 1,350 to 4,400 RPM, so you can better match blade speed to the material and type of cut. That matters when you want a cleaner edge in plywood, hardwood, or laminated stock without burn marks or tear-out.

Used on a Festool guide rail, this saw is built to deliver the kind of straight, repeatable cut that normally takes more setup on a table saw or panel saw. That is a big deal on remodel jobs, built-in work, cabinet installs, and shop tasks where moving a full sheet is more hassle than moving the saw. Festool also calls out the ability to cut stacked sheet goods in one pass, which saves real time when you are batching panels and want matching parts without building jigs.

The saw is engineered around control and cut quality, not just raw power. Dual splinterguards help reduce tear-out, and the plunge design makes it easier to start cuts exactly where you need them for cutouts and interior openings. The flat housing also helps with flush cutting, which makes the saw more useful in tight edge situations where a standard circular saw body gets in the way.

On the safety and jobsite-practicality side, the TS 75 uses a spring-loaded riving knife to keep the kerf open and reduce the chance of the blade getting pinched in the material. Festool also adds a slip clutch to help minimize kickback risk and reduce wear on the blade, gear case, and motor when the cut gets demanding. For blade swaps, the FastFix system locks the switch and arbor at the same time, which makes blade changes quicker and more controlled.

Dust control is another strong point. The saw includes dust extraction capability with a 1-1/16" (27 mm) / 1-7/16" (36 mm) dust port connection, which helps keep the cut line visible and cleanup to a minimum. That matters even more when you are working inside an occupied home, finished interior, or customer space where controlling dust is part of doing the job right, not an extra.

The system fit is also important. This is not a standalone circular saw meant to be used any which way. It is part of the Festool cutting system and is designed to work with Festool guide rails for straight, splinter-free performance. The saw comes with a Plug it power cord and packs into a Systainer3 SYS3 M 437 for transport and storage. One thing to know up front: the guide rail is sold separately, so if you want the full track saw advantage, plan on pairing it with the right rail length for your work.

Who should buy it? This saw makes the most sense for cabinet installers, trim carpenters, remodelers, finish crews, and serious woodworkers who cut a lot of large panels or thicker stock and want portable accuracy. If you mostly break down thin sheet goods, a smaller track saw may be enough. If you need more depth, cleaner cuts, and a system that travels to the job instead of dragging material back to the shop, the TS 75 earns its keep fast.

This saw shares its guide rail system with the rest of the Festool track saw lineup, so adding a second saw or a shorter rail later stays simple.

Festool CT MIDI I HEPA Dust Extractor

Festool 578512 CT MIDI I HEPA Bluetooth Dust Extractor is a compact mobile dust extractor built for contractors, installers, finish carpenters, and serious DIY users who need clean work with less hassle. This is a dust extractor designed for on-site dust collection, cleanup, and tool-connected extraction during sanding, routing, sawing, and drilling. Model Number: 578512. If you want a unit that is easy to move but still has the suction and control features that matter on real jobs, this is the lane the CT MIDI I is built for.

The big reason this extractor stands out is how much performance Festool fits into a small platform. With up to 130 CFM of airflow and a maximum vacuum rating of 96 in static water lift, it is built to keep up with common power tool dust collection tasks and final cleanup without feeling underpowered. The suction is adjustable in five levels, which matters when you are switching between tasks like sanding a painted door, trimming material indoors, or drilling where too much suction can fight the tool.

Festool also got the day-to-day usability right here. The touch controls are simple and easy to use, even when you are wearing gloves or working in dusty conditions. The smooth tapered suction hose is designed to reduce snagging, which is a small detail until you are dragging a hose around finished flooring, around sawhorses, or along a guide rail all day. The flat top gives you a usable storage surface, and the integrated hose garage and cord wrap keep the setup from turning into a pile of hose and cable in the van.

Filter access is another practical improvement. The main filter can be replaced from the outside, and the manual filter cleaning function helps restore airflow when the filter or bag starts to load up. In plain terms, that means you can keep suction where it needs to be and use more of the bag capacity before stopping. For anyone doing repeated sanding or punch-list work inside occupied spaces, that is a real time-saver.

Dust control is only half the story. The CT MIDI I HEPA is also set up to work smarter with your tools. The built-in electrical outlet supports tool-triggered auto-on operation for corded tools, so the extractor starts with the tool instead of forcing you to make a second trip. Integrated Bluetooth expands that to certain cordless setups when used with Bluetooth battery packs or an optional remote control. That makes this extractor a better fit for mixed corded and cordless workflows than a basic shop vacuum.

On portability, this unit lands in a very useful middle ground. It is lighter and easier to carry than a larger extractor, but it still gives you a 4.0 gallon container capacity and 3.3 gallon filter bag capacity. The chassis is built for jobsite movement, with large rear wheels, front casters, and a locking brake to keep it planted once you have it where you need it. Festool also integrates the extractor with its Systainer system through the T-LOC connection, which matters if your workflow already revolves around stacked tool storage and mobile setups.

The wet extraction capability adds flexibility, but there is an important detail: wet extraction requires a special wet filter. The built-in LevelStop system shuts the motor down when collecting water to help protect the machine. That makes this more versatile than a dust-only extractor, but it is still clearly optimized for clean, mobile dust extraction around power tools first.

Who should buy it? If you work inside finished spaces, do installation work, punch-list work, cabinet fitting, trim, door prep, flooring, or light remodeling, this Festool dust extractor makes a lot of sense. It is especially good for users who care about mobility, cleaner indoor work, and better integration with cordless and corded tools. If you need maximum debris capacity for heavy demolition, you would step up in size. If you want a compact extractor that travels well and does the job right, this one is right in the sweet spot.

Festool FS 1900/2 75-in. Guide Rail

Festool 491503 75" Guide Rail FS 1900 is a precision cutting guide for tradespeople and serious woodworkers who want straight, clean cuts without fighting layout every time. This is a guide rail designed for straight, splinter-free cuts with compatible Festool plunge saws, routers, and jigsaws. Model Number: 491503. At 75 inches long, it gives you the reach needed for full-size panels, long rip cuts, and repeatable trim work while keeping the tool tracking where it should.

The big advantage here is speed with accuracy. Festool builds the FS 1900 with an integrated splinterguard that aligns to the cut line, so you are not guessing where the blade will land. On the job, that saves setup time and helps reduce tear-out both with the grain and across it. Festool also notes that when paired with a Festool TS plunge cut saw, this rail supports precision cuts up to 69 inches long, which makes it a strong fit for cabinet parts, sheet goods, and finish work that cannot afford sloppy edges.

Festool SELFCLEAN Filter Bags for CT MIDI I, 5-Pack

The Festool 204308 Self-Cleaning Filter Bags For CT 15 / CT MINI I / CT MIDI I, 5-Pack is a replacement dust extractor filter bag set for select Festool vacuums. This is a dust bag designed for collecting and containing dust and debris during cleanup, sanding, and general extraction work. Model Number 204308. If you use a Festool CT 15, CT MINI I, CT MIDI I, or compatible CTC MINI/MIDI extractor, these bags matter because they help maintain suction while making disposal cleaner and faster.

Who should buy this bundle? Cabinet installers, remodelers, flooring crews and woodworkers who break down sheet goods and want clean, accurate cuts without a cloud of dust. The CT MIDI I is the most compact and portable of the three extractor options, with a 4.0 gal container and 130 CFM of airflow, a good fit for installers who carry the extractor room to room and in and out of the van.

Festool TS 75 EQ-F-Plus Plunge Cut Track Saw

Festool CT MIDI I HEPA Dust Extractor

Festool FS 1900/2 75-in. Guide Rail

Saw, rail and extraction in one order

The Festool TS 75 EQ-F-Plus Plunge Cut Track Saw + CT MIDI I HEPA Dust Extractor Bundle gets you a complete Festool plunge cut track saw system in one order, with the accessories you would buy next already in the box.

• Who it's for: Cabinet installers, remodelers, flooring crews and woodworkers who break down sheet goods and want clean, accurate cuts without a cloud of dust.
• Why it stands out: The TS 75 and the CT MIDI I are built to work together, and the matched 75-in. Guide Rail plus five spare filter bags mean the system is ready to work the day it arrives.
• Worth knowing: The CT MIDI I is the most compact and portable of the three extractor options, with a 4.0 gal container and 130 CFM of airflow, a good fit for installers who carry the extractor room to room and in and out of the van. The same tool is also offered with the other two extractors if you want more capacity or a smaller footprint.

• What kind of saw is this? This is a corded plunge cut track saw designed for straight, splinter-free cutting when used with Festool guide rails.
• How deep can it cut? The maximum cutting depth is 3" (75 mm), and cutting depth at 45 degrees is 2-3/16" (55 mm).
• Is this a HEPA dust extractor? Yes. The CT MIDI I includes a HEPA filter and is described as a HEPA-certified dust extractor.
• Can it start automatically with a tool? Yes. It has a built-in electrical outlet for corded tool auto-start, and it also supports Bluetooth activation with compatible Festool Bluetooth battery packs or an optional remote control.
• Do the spare filter bags fit the extractor in this bundle? Yes. The 204308 SELFCLEAN filter bags are made for the Festool CT MIDI I, the extractor included in this bundle.