The Freud LU73R010 10 in. Cabinetmakers Crosscut Blade is a heavy-duty crosscutting blade built for cabinet shops, finish work, and clean cuts in sheet goods and solid wood. This is a circular saw blade designed for fine-finish crosscutting in hardwood, softwood, plywood, chipboard, veneer plywood, and melamine. Model Number: LU73R010. If your work starts with finished faces that cannot chip out, this is the kind of blade you put on the saw before you make the first cut.

What separates this blade from a general-purpose option is the tooth geometry. Freud uses a 38 degree Hi-ATB grind that is specifically aimed at delivering cleaner crosscuts in double-sided veneer plywood and double-sided melamine. In plain terms, that aggressive top bevel helps shear surface fibers instead of tearing them out. Paired with a 60 tooth count on a 10 inch blade, it is tuned for cut quality first, not rough framing speed.

The cutting numbers back up that jobsite role. The blade has a 0.126 inch full kerf, a 0.087 inch plate, a 5/8 inch arbor, and a 10 degree hook angle. That combination gives you a blade that feeds positively but still favors control and finish quality. Freud rates it for material thicknesses from 1/2 inch up to 2-3/4 inches, which puts it right in the sweet spot for cabinet components, shelving parts, face-frame stock, trim parts, and finished panels.

Freud also builds the LU73R010 around long-term accuracy. The TiCo high-density carbide blend is there for wear resistance and edge retention, which matters when you are running sheet after sheet and do not want cut quality falling off halfway through a job. Precision tensioning helps the blade stay flat and true, so you get more consistent tracking and less wandering through the cut. That is exactly what cabinetmakers want when parts need to come off the saw ready for assembly, edge treatment, or finish.

Heat and pitch buildup are real problems in a production shop, especially when you are cutting resinous materials or laminated stock. Freud's Perma-SHIELD non-stick coating helps reduce heat, gumming, and corrosion. That means smoother operation over long runs and less cleanup when the day is done. It is not a gimmick feature. A blade that runs cleaner tends to stay more predictable, and predictable cuts are what keep finished work looking finished.

In terms of saw fit, this blade is sized for 10 inch saws that use a 5/8 inch arbor, and it carries a maximum speed rating of 7,000 RPM. That makes it relevant for many table saw and miter saw setups used for crosscutting applications, as long as the saw matches the blade's diameter, arbor, and speed requirements. Freud also clearly notes that non-ferrous cutting is not recommended, so this blade should stay in the wood and panel-processing lane where it belongs.

Who should buy it? Cabinetmakers, finish carpenters, millwork shops, and serious woodworkers who care more about surface quality than all-purpose versatility. If you spend your time breaking down veneered panels, trimming melamine parts, or crosscutting hardwood parts where edge quality matters, this blade makes sense. If you need one blade to rip framing lumber and knock around on rough jobs, this is probably more blade than that job needs.

Freud LU73R010 10 in. Cabinetmakers Crosscut Blade is the right call when finish quality comes first

This is a purpose-built cabinet and panel blade that earns its keep by leaving cleaner crosscuts in the materials that usually show every mistake.

• Who it's for: Cabinetmakers, finish carpenters, millwork shops, and woodworkers cutting plywood, melamine, hardwood, and other finished stock where edge quality matters.
• Why it stands out: The 38 degree Hi-ATB grind, TiCo carbide, and Perma-SHIELD coating make this blade more specialized than a basic combination blade, and that specialization is exactly why it cuts so clean.
• Worth knowing: This is not your do-everything shop blade. Freud says non-ferrous cutting is not recommended, and if you mainly rip rough lumber, you are better off keeping this one reserved for clean crosscut duty.

• What kind of cuts is this blade designed for? It is designed for fine-finish crosscutting, especially in hardwood, softwood, plywood, chipboard, double-sided veneer plywood, and double-sided melamine.
• Can this blade cut non-ferrous metal? No. Freud lists non-ferrous cutting as not recommended for this blade.
• What arbor size does it use? The Freud LU73R010 uses a 5/8 in. arbor.
• What is the maximum speed rating? The blade is rated for a maximum of 7,000 RPM.