Jet J-4400A, 12-in. Industrial Disc Finishing Machine 115/230V 1-Phase (414602)
Jet J-4400A, 12-in. Industrial Disc Finishing Machine 115/230V 1-Phase (414602)
In Stock - Ships from Manufacturer
Product Details
Product Details
Key Features
Overview
The Jet 414602 J-4400A 12 in. Industrial Disc Finishing Machine is a stationary disc sander built for precise edge sanding and finishing in metalworking and woodworking shops. This is a disc finishing machine designed for metal and wood finishing. Model Number 414602. If you need a shop machine that stays planted, holds settings, and gives you better control on miters, bevels, and cleanup work, this one is aimed at that kind of use.
The big number here is the 1960 RPM disc speed. That speed is called out as the optimum range for both metal and wood finishing, which tells you this machine is meant for controlled stock removal and finish work instead of rough, high-speed grinding. For a disc sander, that matters because you want a machine that removes material consistently without chattering across the edge of the workpiece.
JET also calls out a fully machined balanced disc that runs vibration free. In plain terms, that means the machine is built to track smoother under load. Less vibration usually translates into cleaner edge work, better part control, and less operator fatigue when you are running multiple pieces back to back. On a finishing machine, smooth operation is not a luxury. It is what keeps your work from looking washed out or uneven.
The work area is built around a large cast iron slotted table. Cast iron gives you the weight and rigidity you want on a stationary sander because it resists flex and helps the machine feel settled during use. The table also tilts, and the easy-to-read degree scale makes it more practical to set the angle you actually want instead of guessing and checking. That is useful when you are trying to repeat bevels or sneak into a fit without wasting material.
For angle work, the standard die-cast aluminum miter gauge is a real advantage. JET specifically notes that plain and compound miters are easily obtained with the supplied gauge. That gives this 12-inch disc finishing machine more range than a basic edge-finishing setup. If your work regularly includes fitting trim-like parts, dialed bevels, brackets, or small fabricated pieces, the gauge and tilt table make the machine more than just a flat-edge sander.
The base and support structure matter too. This machine comes with a heavy-duty one-piece steel stand, and at about 175 lbs it is clearly built as a permanent shop tool, not something you drag around the jobsite. That weight is part of the appeal. Heavier stationary tools generally stay more stable, especially when you are pushing larger stock or trying to hold a piece square against the table.
Power comes from a 1-1/2 horsepower motor, with 115/230V single-phase operation listed for flexibility in shop setup. That gives buyers a little more freedom depending on what power is available in the space. This is not a cordless platform tool and it is not meant to be portable. It is a dedicated shop machine for users who want repeatable finishing performance from a fixed location.
Who should buy it? The right buyer is the shop owner, serious fabricator, woodworker, maintenance department, school shop, or production user who needs a real stationary disc sander instead of a light benchtop compromise. If your work involves edge cleanup, fitting miters, bevel sanding, or general finishing on wood and metal, the Jet 414602 J-4400A 12 in. Industrial Disc Finishing Machine gives you the table support, disc balance, and machine weight that make that work easier to do accurately.
Built for Controlled Finishing
This machine is set up for finish work where control matters more than brute removal. Between the 1960 RPM disc speed and the stable table support, it is aimed at clean edges, fit-up work, and repeatable results.
- 1960 RPM disc speed is specified as ideal for both metal and wood finishing
- 12-inch disc gives you a broad sanding surface for edge cleanup and shaping
Hold Angles with Less Guesswork
A disc sander is a lot more useful when it can do more than square up an edge. The slotted table, tilt scale, and miter gauge help this machine handle straight work, bevel work, and compound angle setups with better repeatability.
- Standard die-cast aluminum miter gauge supports plain and compound miters
- Easy-to-read table tilt scale helps you set the working angle accurately
Shop Weight, Shop Stability
At roughly 175 pounds with a one-piece steel stand, this is the kind of stationary sander you set in place and depend on. The heavier build and cast iron table are there for stability, not convenience, and that is exactly what many shop users want.
- Heavy-duty one-piece steel stand supports fixed shop use
- Large cast iron slotted table adds rigidity at the work surface
What's in the Box
- (1) Jet J-4400A 12 in. Industrial Disc Finishing Machine
- (1) Miter Gauge
- (1) Heavy-Duty One-Piece Steel Stand
Assembly is required.
Key Specifications
| Tool Type | Industrial Disc Finishing Machine |
|---|---|
| Disc Diameter | 12 in. |
| Motor Output | 1.5 HP |
| No-Load Speed | 1960 RPM |
| Voltage | 115/230V, Single Phase |
| Amperage | 12.6 A |
| Weight | 175 lbs |
| Work Table Size | 16.5 in. x 12 in. |
Built For
Pro Tip
If you are using the Jet J-4400A for repeat bevels or miters, take a minute to dial in the table tilt and miter gauge together before you start your run. That setup work is where this machine pays off, especially when you are trying to make multiple parts match.
Warranty & Support
Tool Nut's Take
Jet 414602 J-4400A 12 in. Industrial Disc Finishing Machine Means Business
This is the kind of stationary disc sander you buy when you are done messing around with light-duty machines that vibrate, wander, or refuse to hold an angle.
- Who it's for: Shop users doing regular wood or metal finishing, especially anyone fitting miters, sanding bevels, or cleaning up fabricated parts.
- Why it stands out: The balanced 12-inch disc, cast iron table, miter capability, and heavy steel stand all work together to make the machine feel steady and predictable.
- Worth knowing: This is a 175 lb stationary machine with assembly required, so plan your floor space and power setup before it arrives.
Common Questions
- What is this machine used for? It is designed for metal and wood finishing, including edge cleanup, miter work, and bevel sanding.
- What size disc does it use? This machine uses a 12-inch sanding disc.
- What power does it require? It runs on 115/230V single-phase operation.
- Is it portable? No. This is a stationary industrial disc finishing machine and weighs about 175 lbs.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

