Makita 792116-2 16-5/16" 50T Steel Circular Saw Blade, General Purpose is a large diameter circular saw blade built for heavy wood cutting. This is a circular saw blade designed for crosscutting beams and timber. Model Number 792116-2. If you are running a Makita 5402NA and need a blade sized for big stock, this is the correct general purpose option for wood and beam work.

The 16-5/16 inch diameter and 50-tooth layout put this blade in a category most users only reach for when the job calls for serious capacity. It is intended for wood, general purpose cutting, and beam and timber applications, so it fits the kind of work where you need broad reach across thick material instead of the smaller blades used on standard jobsite circular saws. Makita lists it as a crosscut blade, which makes it a smart pick when cleaner cuts across grain matter more than aggressive rough ripping.

What matters here is not just the size, but how the blade is built. Makita calls out a high quality steel body and an expertly tensioned plate. In real use, that means the blade is built to stay truer under load and resist the kind of wobble that can show up when you are pushing through large timber. On oversized saws, a properly tensioned blade is a big deal because any instability gets magnified once the diameter goes up.

The chisel tooth grind is another practical detail. It is a straightforward tooth pattern for wood cutting that favors dependable performance in general purpose work. Paired with the 50-tooth count, it gives you a middle-ground setup that leans cleaner than a low-tooth framing blade without moving into specialty finish-only territory. For contractors or timber framers cutting structural wood, that balance is usually what you want.

Makita rates the blade for a maximum speed of 2,760 RPM and a 1 inch arbor. Those are not throwaway numbers. They tell you this blade is meant for a specific large-format saw platform, not a typical sidewinder or worm drive. The fitment note matters too: Makita specifies this blade for use with the Makita 16-5/16 inch circular saw model 5402NA. If that is your saw, this blade is built around that application instead of being a generic close-enough replacement.

For the buyer, this comes down to application. If you are cutting beams, timber, or other large wood members with a 5402NA, this blade makes sense. If you are trying to fit it to a smaller saw or looking for a fine-finish trim blade, it does not. The right user is someone doing carpentry, timber framing, structural wood cutting, or specialty large-stock work who needs the proper diameter, arbor, and speed rating for a serious beam saw setup.

Makita 792116-2 16-5/16" 50T Steel Circular Saw Blade, General Purpose for the Big-Saw Crowd

This is the kind of blade you buy because the job actually demands a large beam saw, not because you want something flashy.

• Who it's for: Pros cutting beams, timber, and other large wood stock with a Makita 5402NA.
• Why it stands out: Correct 16-5/16 inch sizing, 1 inch arbor, 50-tooth general purpose setup, and a tensioned steel plate built for true cuts.
• Worth knowing: This is a purpose-specific circular saw blade for a specific saw platform. If you do not have the right saw and arbor setup, this is not a universal fit blade.

• What saw is this blade designed for? Makita lists it for use with the Makita 16-5/16 inch circular saw model 5402NA.
• What material is it intended to cut? It is intended for wood cutting, including general purpose cuts in beams and timber.
• What arbor size does it use? This blade has a 1 inch arbor.
• What is the maximum rated speed? Makita lists a maximum speed of 2,760 RPM.