The Makita A-93675 10" 60T Micro-Polished Miter Saw Blade is a 10 inch carbide-tipped miter saw blade built for fine crosscutting and finish work. This is a miter saw blade designed for precision crosscuts in wood, particleboard, and laminates. Model Number A-93675. If you are trying to get cleaner cuts out of a 10 inch miter saw without overworking the saw, this blade is aimed right at that job.

What matters here is how the blade is set up for finish quality. Makita uses an ATAF, or Alternate Top and Alternate Face, tooth pattern for ultra-precision cutting. Paired with a 60-tooth count, that gives you a blade that is better suited to trim, casing, baseboard, moldings, shelving parts, and other visible cuts where edge quality matters more than brute-speed ripping.

The Japanese ultra-thin kerf carbide-tipped design uses a .091 inch kerf and a .071 inch plate thickness. In practical terms, that thinner cut takes less material out of the workpiece and creates less drag on the motor. On the saw, that can translate to smoother feed, less strain during repeated crosscuts, and a more efficient cut when you are working with finished stock or sheet-good components.

Makita also backs up the tooth geometry with blade body construction that matters. The saw plate is fully hardened and hand-tensioned to help the blade run true through the cut. That is the kind of detail that makes a difference when you are chasing consistent cut quality instead of fighting deflection or a wandering blade path.

The carbide teeth are micro-grain carbide and honed with up to 600 grit for a mirror finish. That finishing step is not just brochure talk. On a blade like this, it is there to help leave a smoother cut surface, especially on trim materials, laminates, and particleboard where rougher blades tend to chip, fuzz edges, or leave more cleanup work behind.

Fitment is straightforward. This blade has a 10 inch diameter with a 5/8 inch arbor and is rated for miter saw use with a maximum speed of 5,870 RPM. It is a single-blade pack intended for miter saws that accept a 10 inch blade and 5/8 inch arbor. There is no diamond arbor knockout listed, so buyers should match it to the saw's standard arbor requirements before ordering.

This blade makes the most sense for carpenters, remodelers, cabinet installers, trim crews, and serious DIY users who care about cut quality on visible work. If your day involves crosscutting wood, particleboard, or laminates and you want a cleaner finish from a miter saw, the Makita A-93675 is the kind of accessory upgrade you actually notice in the cut.

Makita A-93675 10" 60T Micro-Polished Miter Saw Blade for Finish Work

This is the blade you buy when cut quality matters more than chewing through stock as fast as possible.

• Who it's for: Trim carpenters, remodelers, cabinet installers, and DIY users making visible crosscuts in wood, laminates, and particleboard.
• Why it stands out: The ATAF tooth grind, ultra-thin kerf, and polished micro-grain carbide teeth all point in the same direction: cleaner, smoother cuts with less drag on the saw.
• Worth knowing: This is a fine-cutting miter saw blade, not a rough framing blade. Make sure your saw takes a 10 inch blade with a 5/8 inch arbor and stays under the 5,870 RPM rating.

• What saws does this blade fit? It is designed for miter saws that use a 10 inch blade with a 5/8 inch arbor.
• What materials is this blade made to cut? Makita lists wood, particleboard, and laminates as the intended materials.
• What is the maximum speed rating? The blade is rated for a maximum of 5,870 RPM.
• What kind of cuts is it designed for? This blade is built for fine crosscutting and precision finish work on a miter saw.