Makita A-94792 12" 60T Ultra-Coated Miter Saw Blade

The Makita A-94792 12" 60T Ultra-Coated Miter Saw Blade is a carbide-tipped miter saw blade made for smooth, accurate crosscuts in wood, construction lumber, and plastics. This is a miter saw blade designed for precision cross cutting and finish-focused work. Model A-94792 uses a 12 inch diameter, 60-tooth layout, and 1 inch arbor to fit compatible miter saws that need a blade built for cleaner results instead of fast, rough cuts.

What matters most here is the tooth pattern and kerf. Makita uses an ATAF, or Alternate Top and Alternate Face, tooth grind for ultra-precision cutting. Paired with the .091 inch ultra-thin kerf, that means the blade removes less material as it cuts. On the job, that translates to smoother crosscuts, less drag on the motor, and less wasted material, which is especially useful when you're cutting finished trim, laminate-faced stock, particle board, or clean visible pieces where edge quality matters.

The steel plate is fully hardened and hand-tensioned, which is the kind of detail that helps a blade run truer. A stable plate matters because a saw blade that tracks consistently gives you more predictable cuts and less chatter. Makita also uses micro-grain carbide teeth honed up to 600 grit for a mirror-like finish. That is not just spec-sheet filler. Finer edge preparation helps the blade shear material more cleanly, which is a real advantage when you are trying to avoid splintering or cleanup sanding after the cut.

The ultra-coated finish is there for more than looks. It is designed to reduce pitch build-up, so the blade stays cleaner longer during repeated cutting. Less build-up on the blade can help maintain cut quality and keep the blade moving freely through the workpiece. Makita also adds resin bond filled laser cut slots for quieter, smoother cutting. That helps dampen vibration and noise compared to a plain plate, which is useful on long trim days when the saw is running constantly.

In terms of fit and operating limits, this blade is built for miter saws, with a 1 inch arbor and a maximum speed rating of 5,000 RPM. The 5 degree hook angle keeps the cut controlled, which suits crosscutting applications better than an aggressive feed-focused blade. The carbide tooth material and premium ultra-coated blade design make it a practical accessory for finish carpenters, remodelers, cabinet installers, and serious DIY users who want better edge quality than a general-purpose construction blade usually delivers.

If your work leans toward trim, molding, finished lumber, shelving, laminates, or plastic materials where a rough edge is a problem, this blade makes sense. If you mainly blast through dirty framing lumber all day, there are cheaper blades for that. The Makita A-94792 is for users who care about cut quality, reduced material loss, and keeping a miter saw cutting clean without fighting extra drag from a thicker kerf blade.

A smart blade upgrade for cleaner finish work

The Makita A-94792 12" 60T Ultra-Coated Miter Saw Blade is the kind of accessory upgrade you notice right away if your current blade leaves fuzzy edges or makes your saw work harder than it should.

• Who it's for: Finish carpenters, remodelers, cabinet installers, and DIY users making visible crosscuts in trim, wood, laminates, or plastics.
• Why it stands out: The ATAF grind, thin kerf, coated plate, and resin-filled laser slots all point to the same goal: smoother, quieter, more controlled cutting.
• Worth knowing: This is a 12 inch, 1 inch arbor miter saw blade rated for 5,000 RPM max, so check your saw specs before you buy. It is a finish-oriented blade, not a cheap rough-cut throwaway.

• What type of saw is this blade made for? It is designed for miter saws.
• What materials can it cut? Makita lists wood, construction lumber, and plastics as supported materials.
• What arbor size does it use? This blade uses a 1 inch arbor.
• What is the maximum blade speed rating? The maximum rated speed is 5,000 RPM.