The Makita GT500M 40V max XGT Brushless Cordless 5-Pc. Combo Kit (4.0Ah) is a cordless combo kit built around Makita's 40V max XGT platform for demanding drilling, fastening, cutting, and jobsite support work. This is a combo kit designed for drilling, driving, cutting, and general construction tasks. Model Number: GT500M. If you want one kit that covers the tools most crews reach for every day without stepping down in power, this is the kind of setup that makes sense.

Makita built this kit around five core tools: the GPH01 1/2 inch hammer driver-drill, GDT01 4-speed impact driver, GRJ01 reciprocating saw, GSR01 rear handle 7-1/4 inch circular saw, and ML001G L.E.D. flashlight. That spread matters because it covers the actual workflow on a site. You can drill anchors and wood framing holes with the hammer drill, run structural fasteners and hardware with the impact driver, cut pipe or demo material with the recip saw, handle framing and sheet goods with the circular saw, and still have task lighting when the job runs late.

The drill and impact driver are not throw-in tools. The hammer driver-drill delivers up to 1,250 in-lbs of max torque with two speed ranges of 0-650 and 0-2,600 RPM, plus hammer action up to 39,000 BPM. In practical terms, that gives you a tool that can handle rough-in drilling, masonry pilot work, and larger bit loads without feeling like a light-duty kit drill. The impact driver pushes up to 1,950 in-lbs of max torque and gives you four speed settings plus precision modes, so you can go from cabinet hardware and lighter fastening to heavier ledger, structural screw, and lag-style work with more control than a basic single-speed impact.

The cutting side of this kit is where it separates itself from entry-level combo sets. The GRJ01 reciprocating saw runs at 0-2,300 SPM in Low and 0-3,000 SPM in High with a 1-1/4 inch stroke length. That longer stroke helps it clear material faster in wood and mixed demo. Makita also calls out a refined crank mechanism to reduce blade deflection and vibration, which is the kind of thing you notice when you're trying to keep a cut straight in pipe, nail-embedded lumber, or overhead work. The GSR01 rear handle circular saw runs at 6,400 RPM and cuts up to 2-9/16 inches at 90 degrees, so it has the depth for 3x material in a single pass. For framers and remodelers, that is a real jobsite advantage, not a brochure spec.

Makita also paid attention to the details that affect how these tools feel in daily use. The circular saw uses a die-cast magnesium base for a lighter but durable design and includes an electric brake for faster stops between cuts. The reciprocating saw has tool-free blade changes and a built-in work light. The hammer drill has an electronic digital clutch and a reinforced gear housing. The impact driver uses an ultra-smooth variable speed trigger and puts the four-speed selector under the chuck, which is a smart layout when you're moving between fastener sizes and materials all day.

On the platform side, this kit is fully tied into the Makita 40V max XGT battery system. Makita's XGT setup uses digital communication between the battery, tool, and charger to manage power delivery and monitor overload, over-discharge, and overheating. The batteries use a multi-layer contact interface and rigid rails designed to hold securely under high-demand use. If you are buying into XGT for the first time, this is a strong entry point because it gives you a broad set of tools and two 4.0Ah batteries right away. If you are already on XGT, it drops straight into the same battery and charger ecosystem.

The included ML001G flashlight is more useful than it looks in a spec list. It outputs 160 lumens, runs up to 55 hours on a 4.0Ah battery, and has a 12-position pivoting head with a metal hang hook. That means it can light up a panel, attic bay, crawl space, or cut line without tying up one of your main tools. On real jobs, that kind of convenience adds up.

This combo kit makes the most sense for framing crews, remodelers, general contractors, punch-list pros, and serious DIY users who want pro-level cordless tools instead of starter-kit compromises. It is also a good fit for users moving from Makita 18V LXT into the higher-output XGT platform. If your work regularly includes heavy drilling, repeated fastening, demolition cuts, and circular saw use, this kit covers the core jobs with tools that are built for actual load, not just occasional use.

Makita GT500M 40V max XGT Brushless Cordless 5-Pc. Combo Kit (4.0Ah) is a serious starter set for serious work

This is the kind of combo kit you buy when you actually plan to lean on the tools, not leave them riding in the truck for occasional fixes.

• Who it's for: Contractors, remodelers, framers, and committed DIY users who want to move into Makita XGT with a core set that covers the real everyday jobs.
• Why it stands out: The drill, impact, recip saw, and rear handle circular saw are all legit performers on their own, and the included batteries, charger, and wheeled bag make the package feel complete.
• Worth knowing: This is a bigger investment than an entry-level combo kit, but you're buying into Makita's higher-output XGT platform with tools built for heavier load applications.

• What type of product is this? This is a 5-piece cordless combo kit built on the Makita 40V max XGT platform.
• Does this kit include batteries and a charger? Yes. It includes two 40V max XGT 4.0Ah batteries and a Rapid Optimum Charger.
• What applications is this kit designed for? It is designed for demanding drilling, driving, and cutting applications on construction and remodeling jobs.
• Is this compatible with Makita XGT batteries? Yes. The kit is compatible with Makita 40V max XGT Lithium-Ion batteries.