Milwaukee Bit Extension 5-1/2-in. (48-28-4001)
Milwaukee Bit Extension 5-1/2-in. (48-28-4001)
Out of Stock - Available to Order - Usually ships in 14-20 days
Product Details
Product Details
Key Features
Overview
The Milwaukee 48-28-4001 Bit Extension 5-1/2" is a drilling accessory built to extend the reach of larger boring bits and hole saw setups. This is a bit extension designed for extending selfeed bits, auger bits, and hole saws into tighter drilling locations. Model Number: 48-28-4001. If you already use 7/16 inch shank accessories and need a little more clearance between the drill and the work, this is the simple fix.
What makes this extension useful is not just the added length, but where that extra 5-1/2 inches helps on the job. When you're drilling between studs, inside cabinets, around joists, or in rough-in work where the drill body runs out of room, an extension like this keeps the bit engaged without forcing an awkward angle. That means cleaner starts, better control, and less fighting the tool in cramped spaces.
Milwaukee built this accessory around a 7/16 inch hex interface, so it accepts most 7/16 inch shanks and is intended for selfeed bits, auger bits, and hole saws 1 inch in diameter and larger with a 7/16 inch shank. In plain terms, this is meant for the bigger hole-making accessories, not small twist bits or light fastening work. It is a purpose-built extension for boring applications where torque and reach both matter.
The shank is designed to fit both standard three-jaw chucks on drills with 1/2 inch capacity and larger, as well as 7/16 inch quick-change chucks. That gives it real-world flexibility if your crew runs multiple drill platforms or dedicated hole-hawg-style tools for rough-in drilling. You are not locked into one tool style as long as the chuck interface matches the accessory requirements.
Milwaukee also calls out a hex key included to secure the accessory. That matters because with larger selfeed bits and hole saws, retention is not something you want to leave loose. A secure connection helps reduce slop in the setup and gives you a more confident feel when the accessory starts to bite into the material.
The overall package is straightforward: one extension, black finish, compact enough to keep in a drill bag, and light at about 0.525 pounds. It is not a kit and it is not trying to be. This is the kind of accessory you buy because it solves a specific jobsite problem and then stays in rotation for years whenever reach becomes the limiting factor.
If you are an electrician, plumber, remodeler, or general contractor drilling larger holes through framing members, the Milwaukee 48-28-4001 Bit Extension 5-1/2" makes sense. It is especially useful for anyone running selfeed bits, auger bits, or large hole saws in places where a full-size drill and the accessory cannot line up cleanly without more stand-off distance.
What's in the Box
- (1) Milwaukee 48-28-4001 Bit Extension 5-1/2"
Hex key included for securing the accessory. Bits, hole saws, and drill not included.
Key Specifications
|
|
5.5 in |
|---|---|
|
|
5-1/2 in |
|
|
7/16 in hex |
|
|
0.525 lb |
|
|
1 |
|
|
Black |
Compatibility
Built For
Pro Tip
Before you buy, check both sides of the setup: your accessory needs a 7/16 inch shank, and your drill needs either a 7/16 inch quick-change chuck or a 1/2 inch capacity three-jaw chuck. That quick check saves you from ending up with an extension that fits the bit but not the tool.
Warranty & Support
Tool Nut's Take
Milwaukee 48-28-4001 Bit Extension 5-1/2" for Rough-In Drilling
This is a no-nonsense add-on for guys who already run big boring accessories and just need more reach without changing tools.
- Who it's for: Electricians, plumbers, remodelers, and contractors using selfeed bits, auger bits, or large hole saws in framing and tight access work.
- Why it stands out: The 5-1/2 inch extension length, 7/16 inch hex compatibility, and fit with both larger three-jaw chucks and 7/16 inch quick-change chucks make it broadly useful on real drilling setups.
- Worth knowing: This is a single-purpose accessory, not a universal adapter for every bit in the truck. Make sure your accessory shank and drill chuck match the 7/16 inch format it is built around.
Common Questions
- What accessories does this extension work with? It is designed for selfeed bits, auger bits, and hole saws 1 inch diameter and larger with a 7/16 inch shank.
- Will it fit a standard drill chuck? It fits three-jaw chucks on drills with 1/2 inch capacity and larger, and it also fits 7/16 inch quick-change chucks.
- How much extra reach does it add? Milwaukee rates this extension at 5-1/2 inches of added reach.
- Is it meant for light-duty drilling or larger boring work? This accessory is built for larger boring accessories that use a 7/16 inch shank, not for small general-purpose drill bits.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

