Milwaukee SHOCKWAVE 3-1/2-in. Impact Phillips #2 Power Bits, 25-Pack (48-32-4191)
Milwaukee SHOCKWAVE 3-1/2-in. Impact Phillips #2 Power Bits, 25-Pack (48-32-4191)
Out of Stock - Available to Order - Usually ships in 14-20 days
Product Details
Product Details
Key Features
Overview
The Milwaukee SHOCKWAVE 3-1/2" Impact Duty Phillips #2 Power Driver Bits, model 48-32-4191, are long-reach screwdriver bits built for impact drivers and drill drivers. This is a screwdriver bit set designed for driving Phillips #2 fasteners in general-purpose fastening work. With a 25-piece pack, 1/4 inch hex shanks, and Milwaukee's SHOCKWAVE Impact Duty design, this set is aimed at pros and serious DIY users who want a bit that fits screws properly and holds up better under repeated impact use.
What matters most with a Phillips bit is fit. Milwaukee calls out an Ultimate Fit design along with customized tip geometry and a long-lasting Wear Guard tip. In plain terms, that means the bit is made to seat more securely in the screw recess so it is less likely to slip, strip the head, or walk out under load. If you spend your day hanging hardware, driving cabinet screws, assembling framing connectors, or running general construction fasteners, that better fit saves time and reduces ruined screws.
The other big selling point here is the SHOCKZONE shank. Impact drivers hit hard, and cheap bits usually fail where the tip meets the shank. Milwaukee tunes the SHOCKZONE by tip type so it can absorb peak torque and help prevent breaking. Add the custom heat treat, and you get a bit that is better suited for repeated high-torque fastening than a standard driver bit. That matters most when you are using an impact driver for production work instead of occasional assembly.
The 3-1/2 inch length is another practical advantage. A short bit works fine for open access, but longer power bits give you room around trim, cabinet faces, electrical boxes, brackets, and other tight areas where the chuck or nose of the driver would otherwise get in the way. This is not an extra-long specialty bit for deep recessed screws, but it is a useful middle-ground length that gives you more reach without getting overly whippy in normal fastening applications.
Milwaukee also laser etches the size for quick identification, which sounds small until you are digging through a pouch or gang box looking for the right Phillips bit. Since these use a standard 1/4 inch hex shank, they are easy to swap in common impact drivers, drill drivers, and bit holders that accept 1/4 inch hex accessories. That makes this 25-pack a good fit for crews that burn through Phillips bits and want a consistent replacement on hand.
For the right buyer, this is an easy stock-up item. If you regularly drive Phillips #2 screws and want impact-rated bits with more reach, the Milwaukee SHOCKWAVE set makes sense. It is especially well suited for construction, carpentry, remodeling, installation, and maintenance work where bit durability and screw fit matter more than fancy extras. If you only need one bit for occasional household use, a 25-pack is more than you need. If you work out of a bag every day, having a full pack of matching impact duty Phillips bits is exactly the kind of thing that keeps the job moving.
Drive Screws With Less Slip
A Phillips bit only helps if it stays planted in the screw. Milwaukee's tip geometry is made for a more secure fit, which helps reduce stripped heads and keeps the driver from skating out when pressure comes on.
- Phillips #2 tip for one of the most common screw sizes on the job
- Wear Guard tip is built for better wear resistance over the life of the bit
Built for Impact Driver Torque
Impact drivers hit harder than standard drills, and that is where bit quality really shows up. The SHOCKZONE shank is designed to absorb peak torque so the bit is better prepared for repeated fastening under impact load.
- Optimized SHOCKZONE shank helps prevent breaking
- Custom heat treat supports longer bit life in demanding use
Milwaukee SHOCKWAVE 3-1/2" Impact Duty Phillips #2 Power Driver Bits for Better Reach
Milwaukee SHOCKWAVE 3-1/2" Impact Duty Phillips #2 Power Driver Bits for Better Reach
The 3-1/2 inch length gives you useful stand-off from the chuck when you are working near trim, hardware, brackets, or shallow obstructions. It is a smart size when a standard insert bit leaves the tool body too close to the work.
- 3-1/2 inch overall length
- 25-pack keeps replacement bits ready for service bags and crew boxes
What's in the Box
- (25) Milwaukee SHOCKWAVE 3-1/2" Impact Duty Phillips #2 Power Driver Bits
Key Specifications
| Bit Type | Screwdriver |
|---|---|
| Drive Size | Phillips #2 |
| Length | 3.5 in |
| Shank Size | 1/4 in |
| Shank Style | Hex |
| Pack Quantity | 25 |
| Material Application | All-Purpose |
| Made In | Viet Nam |
Compatibility
Built For
Pro Tip
Use the 3-1/2 inch bit when the nose of your impact driver is crowding the work, especially around cabinet hardware, brackets, and tight interior corners. You get better line-of-sight to the screw and less rubbing from the chuck against finished surfaces.
Warranty & Support
Tool Nut's Take
A smart stock-up bit for everyday Phillips fastening
The Milwaukee SHOCKWAVE 3-1/2" Impact Duty Phillips #2 Power Driver Bits hit the sweet spot if you want better fit, useful reach, and impact-ready durability in a size you will actually use.
- Who it's for: Pros, installers, remodelers, and serious DIY users who run a lot of Phillips #2 screws with impact drivers or drill drivers.
- Why it stands out: The combination of SHOCKZONE torque absorption, Wear Guard tip wear resistance, and 3-1/2 inch length makes it more useful than a basic short insert bit.
- Worth knowing: This is a 25-pack of one size only. If your work jumps between multiple screw types, it is best as a dedicated refill pack rather than a mixed bit solution.
Common Questions
- What screw type is this bit made for? It is a Phillips #2 screwdriver bit.
- Can this bit be used in an impact driver? Yes. Milwaukee states it is designed for use with impact drivers and drill drivers.
- What shank does it use? It has a 1/4 inch hex shank.
- How many bits come in the pack? This set includes 25 power driver bits.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


