Mirka Abranet Net Disc / 6 inch/Grit 100 / Sandpaper Sanding Discs Hook and Loop / 10 pcs / 9A-241-100RP is a 6 inch mesh sanding disc pack built for dust-controlled sanding on wood, filler, paint, plastic, metal, and other surface-prep work. This is a sanding disc designed for material removal and surface preparation with a random orbit sander or hand sanding pad. Model Number: 9A-241-100RP. If you want a coarse abrasive that stays cutting longer instead of loading up fast, this is the point of Abranet.

The big story here is the net-style abrasive instead of a traditional solid paper disc. Because the sanding surface is open mesh, dust can be pulled through the whole disc when used with a vacuum-assisted orbital sander. That matters on the job because loaded abrasives cut slower, run hotter, and leave a worse finish. A cleaner disc keeps working more consistently, which means fewer disc changes and less time spent knocking packed dust out of the abrasive.

The 100 grit rating puts this disc in the coarse prep range. It is a smart choice for knocking down filler, removing material efficiently, scuffing painted surfaces, and doing early-stage sanding before stepping into finer grits. Mirka also uses aluminum oxide grain on a nylon backing, which gives the disc the durability needed for repeated use across a mix of materials instead of just one narrow application.

The 6 inch diameter and hook and loop attachment make this disc easy to run on standard 6 inch orbital sanders, sanding machines, and compatible hand sanding setups. That quick-change backing matters when you are moving through grits or replacing worn discs during production sanding. It keeps the process simple and cuts downtime, especially if you are sanding large panels, filler repairs, or repeated parts.

For real-world shop use, dust control is where this Mirka sanding disc separates itself from ordinary paper discs. On painted surfaces, fillers, primers, plastics, and wood dust, cleaner extraction helps keep the work surface visible and the abrasive from glazing over. It also helps maintain a cleaner work area, which is a real advantage in finishing, refinish, and interior work where airborne dust becomes a problem fast.

Mirka positions Abranet as a multifunction abrasive, and the listed material range backs that up. It is suitable for sanding wood, putty, paint, plastic, metal, primers, lacquers, fillers, and composite materials. That versatility makes it useful for bodywork, cabinet prep, finish removal, general repair work, and shop sanding where one abrasive line needs to cover several materials without constant switching to a specialty disc.

If you already run a vacuum-ready sander, this product makes even more sense because it is built around dust extraction. Mirka also notes compatibility with pad savers to extend backup pad life and interface pads for curved or rounded surfaces. That gives the disc a place inside a broader sanding setup rather than being just a basic consumable.

Who should buy it? Painters, body techs, woodworkers, finish carpenters, cabinet shops, and serious DIY users who care about cleaner sanding and less disc clogging. If you mostly do quick rough work outdoors, a standard paper disc may get the job done. If you sand indoors, do finish prep, or want better dust control from your random orbit sander, this Mirka Abranet disc is the better way to go.

Mirka Abranet Net Disc / 6 inch/Grit 100 / Sandpaper Sanding Discs Hook and Loop / 10 pcs / 9A-241-100RP is the kind of abrasive you buy when you are tired of loaded-up paper

This is a smart upgrade for anyone who wants cleaner sanding, longer disc life, and less time wasting good abrasives on clogged dust.

• Who it's for: Woodworkers, painters, body shops, finish guys, and serious DIY users running a 6 inch random orbit sander with dust extraction.
• Why it stands out: The mesh design is the real deal. Better airflow means better dust pickup and more consistent cutting than standard paper discs.
• Worth knowing: This is a 100 grit disc, so think prep and material removal, not finish sanding. Also, you get 10 discs in the pack, not a bulk box.

• What type of sander does this fit? It is made for standard 6 inch orbital sanders and other compatible sanding machines that use hook and loop discs.
• What materials can it sand? It is suitable for wood, putty, paint, plastic, metal, primers, lacquers, fillers, and composite materials.
• Is this disc meant for dust extraction? Yes. The mesh structure is designed for vacuum-assisted sanding so dust can be pulled through the abrasive more effectively.
• What kind of cut does P100 give? P100 is a coarse grit used for material removal and early-stage surface prep before moving to finer abrasives.