Powermatic PM1900TX-CK1 Dust Collector, 3HP 1PH 230V, 2-Micron Canister Kit (1792072K)
Powermatic PM1900TX-CK1 Dust Collector, 3HP 1PH 230V, 2-Micron Canister Kit (1792072K)
In Stock - Ships from Manufacturer
Product Details
Product Details
Key Features
Overview
The Powermatic PM1900TX-CK1 Dust Collector, model 1792072K, is a stationary dust collection system built for demanding woodworking shops that need strong airflow and better fine-dust control. This is a dust collector designed for woodworking dust and chip collection. With a 3 horsepower motor, 230 volt single-phase power, and dual 2-micron canister filters, it is aimed at serious hobbyists, custom furniture builders, cabinet shops, and professional woodworkers who want one machine handling both bulk chips and the fine dust that hangs in the air.
On the performance side, the numbers make sense for larger shop tools. The motor is rated at 3 horsepower and 15 amps, and it drives a 14 inch steel impeller for strong pull through ducting and machine ports. Powermatic lists filtered airflow at 1,891 cubic feet per minute, which is the kind of output that helps when you are running planers, jointers, table saws, drum sanders, and other machines that create a lot of waste fast. If your current collector loses steam once the bag starts filling or the filters start loading up, this unit is built to fight that drop-off.
The big differentiator here is the TurboCone separation system. Instead of sending everything straight at the filters, the cone helps direct chips down into the collection bags first. In plain terms, that reduces how much debris hits the canisters, which helps maintain airflow longer and cuts back on clogging. That is a real advantage in a working shop because steady suction means less cleanup at the machine, less dust drifting around the room, and less time stopping to service the collector.
The filtration setup matters too. The dual canister design gives you a lot more filter surface area than a standard bag setup, and Powermatic states the 2-micron canisters capture up to 98 percent of fine dust. That is important if you are working with hardwoods, sheet goods, or sanding operations where the harmful stuff is not the chips on the floor but the dust you cannot easily see. The built-in paddle cleaning setup also helps knock debris off the filter media so you can keep the system working efficiently without tearing things apart every time airflow starts to dip.
From a build standpoint, this unit is made for shop use, not light occasional duty. Powermatic calls out all-metal duct construction for better rigidity and smoother internal airflow, and the machine uses a steel impeller instead of a lighter-duty alternative. The clear lower collection bags make it easy to see when they are getting full, and the heavy-duty casters plus handles make the collector easier to position than you would expect from a 268 pound machine. It is still a substantial piece of equipment, but it is practical to move around the shop when layout changes demand it.
Jobsite-style convenience features are built in as well. The infrared remote and programmable digital timer let you run the collector hands-free for up to 99 minutes. That is useful when you want the machine to keep pulling leftover dust from the ducting and air after you finish a cut or shut down your main tool. Instead of walking back over to the collector every cycle, you can start it remotely and let it run out on its own.
As far as shop integration goes, this Powermatic dust collector supports multiple 4 inch dust ports, which gives you flexibility when setting up a central dust collection layout or connecting more than one woodworking machine in a shared system. It is a better fit for fixed shop equipment than for handheld cleanup. If your work revolves around cabinet saws, jointers, planers, edge sanders, or similar stationary tools, this system is in the right class.
Who should buy it? If you are outfitting a serious home shop or a professional woodworking space and need more than a small single-stage collector can deliver, this machine earns a hard look. If you mostly run one compact benchtop tool at a time, it is probably more collector than you need. But if your shop produces real chip volume and you want stronger suction, cleaner air, and less filter maintenance, the PM1900TX-CK1 is built for exactly that workload.
Keep Airflow Up During Heavy Collection
This setup is built for shops where chip volume adds up fast and weak suction becomes a bottleneck. The combination of a 3 horsepower motor, steel impeller, and TurboCone separation is meant to keep collection performance more consistent through longer runs.
- Filtered airflow rated at 1,891 cubic feet per minute
- TurboCone system helps move chips away from the filters to reduce clogging
- Designed for woodworking machines that create both chips and fine dust
Better Fine Dust Control for the Shop
The dual canister layout gives this collector much more filtration area than a basic bag-style setup. That helps it trap fine airborne dust while supporting the airflow needed for machine collection, which is exactly what you want in a shop where cutting and sanding happen every day.
- Dual 2-micron canister filters capture up to 98% of fine dust
- Clear lower bags make fill level easy to check at a glance
- Remote-controlled timer can be programmed up to 99 minutes
Key Specifications
| Motor Power | 3 HP |
|---|---|
| Voltage | 230 V, 1 Ph |
| Motor Amps | 15 A |
| Filtered Airflow | 1,891 CFM |
| Micron Rating | 2 Micron |
| Impeller Diameter | 14 in. |
| Collection Bag Diameter | 20 in. |
| Weight | 268 lbs |
Compatibility
Built For
Pro Tip
Use the remote timer to let the collector run a few extra minutes after you shut off your saw or sander. It helps pull the leftover dust out of the ducting and off the machine instead of leaving it hanging in the air or settling back onto the work.
Warranty & Support
Tool Nut's Take
Powermatic PM1900TX-CK1 Dust Collector for Shops Ready to Step Up
If your shop has outgrown the small collector category, this is the kind of machine that starts making the whole space work better.
- Who it's for: Woodworkers running full-size stationary machines, especially cabinet makers, furniture builders, and serious home shop users who care about both chip collection and cleaner air.
- Why it stands out: The TurboCone system, dual 2-micron canisters, and real 3 horsepower motor address the two things that matter most: keeping suction up and catching fine dust instead of just the big stuff.
- Worth knowing: This is a 230 volt single-phase machine that weighs 268 pounds, so plan your power and floor space before it arrives. It is not a light-duty collector, and that is exactly the point.
Common Questions
- What kind of power does this dust collector require? It runs on 230 volt single-phase power and is rated at 15 amps.
- How fine is the filtration? The system uses dual 2-micron canister filters, and Powermatic states they capture up to 98 percent of fine dust.
- Is this collector meant for heavier woodworking machines? Yes. With a 3 horsepower motor, 14 inch steel impeller, and 1,891 CFM filtered airflow rating, it is intended for serious woodworking dust collection.
- Does it have remote operation? Yes. It includes an infrared remote and a programmable digital timer with settings up to 99 minutes.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

