• Ideal for general doweling and threaded rod applications
• Extended working times at elevated temperatures
• Code listed under the IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-5334
• Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
• Easy hole cleaning — no power-brushing required
• Suitable for use in dry or water-saturated concrete
• Manufactured in the USA using global materials
• 56-oz. side-by-side cartridge
• Use only Simpson Strong-Tie mixing nozzles in accordance with Simpson Strong-Tie instructions; modification or improper use of mixing nozzle may impair ET-3G adhesive performance

Simpson Strong-Tie ET-3G™ is a two-component, high-solids, epoxy-based system ideal for general anchoring of threaded rod and rebar into concrete (cracked and uncracked) and masonry (cracked and uncracked). ET-3G has a long working time — 50 min at 70°F (21°C), and can be applied in dry or damp conditions. The adhesive is a teal color when mixed properly and has a substrate installation temperature range from 50°F (10°C) to 110°F (43°C). Simpson Strong-Tie epoxy anchors for concrete and masonry are rigorously tested to meet IBC requirements, including for both cracked and uncracked concrete applications.

• Ideal for general doweling and threaded rod applications
• Extended working times at elevated temperatures
• Code listed under the IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-5334
• Two-year shelf life for unopened cartridges stored between 45°F (7°C) and 90°F (32°C)
• Easy hole cleaning — no power-brushing required
• Suitable for use in dry or water-saturated concrete
• Manufactured in the USA using global materials
• 56-oz. side-by-side cartridge
• Use only Simpson Strong-Tie mixing nozzles in accordance with Simpson Strong-Tie instructions; modification or improper use of mixing nozzle may impair ET-3G adhesive performance

Install With: Install using the EDTA56P dispensing tool and EMN22i mixing nozzle