Simpson Strong-Tie RTC 14-Gauge ZMAX Galvanized Rigid Tie Corner for 4x, 4x4 Post (RTC44)
Simpson Strong-Tie RTC 14-Gauge ZMAX Galvanized Rigid Tie Corner for 4x, 4x4 Post (RTC44)
Out of Stock - Available to Order - Usually ships in 3-5 days
Product Details
Product Details
Key Features
Overview
The Simpson Strong-Tie RTC44 RTC 14-Gauge ZMAX Galvanized Rigid Tie Corner is a structural wood connector for tying two horizontal members into a vertical 4x wood post at a corner. This is a rigid tie corner designed for corner applications connecting two horizontal wood members to a vertical member. Model Number: RTC44. If you are building a bench, utility table, shelving frame, or similar wood structure and want a cleaner, stronger corner than improvised angled screws, this is the hardware built for that job.
What makes the RTC44 matter is how it simplifies a connection that usually takes extra layout time and still ends up depending on screw angle and installer consistency. Simpson Strong-Tie positions this connector as easier and stronger than angled fastening, and that is the real value here. Instead of fighting alignment at the corner, you get a formed steel connector that brings the members together in a repeatable way and helps keep the assembly square and supported.
RTC44 is the heavier version in this product family, built from 14-gauge steel. That heavier gauge is specific to the RTC44 and is one of the biggest reasons a buyer would choose it. On a real build, that means more confidence in a rigid corner where legs, rails, or aprons need to stay tied together under use. For shop furniture, work surfaces, storage frames, and general wood construction, that extra material is not just a spec on paper. It directly affects how solid the finished corner feels.
The connector is made from galvanized steel with a ZMAX finish, giving it corrosion resistance for wood construction applications. That matters when you are working with treated lumber or any project that may see changing moisture conditions over time. A connector at a lower corner or leg area tends to take abuse from damp floors, stored gear, and day-to-day shop use, so finish quality is not a throwaway detail here.
Installation flexibility is another strong point. The RTC series is compatible with Simpson Strong-Tie Strong-Drive SD screws, giving you a modern fastening option that pairs with the connector design. Simpson also notes that installers should use all specified fasteners, which is worth paying attention to. With structural connectors, performance depends on the complete connection, not just the steel part by itself.
From a design standpoint, this is a practical piece of hardware for anyone building wood-to-wood corners that need better reinforcement than basic screws alone. The formed shape wraps the corner and ties the members back to the post, which helps distribute the load and reinforce the joint where racking and movement usually show up first. It is a good fit for carpenters, woodworkers, shop builders, and serious DIY users who want repeatable, reinforced corners without overcomplicating the build.
If your project involves a 4x post with horizontal members meeting at a corner, the RTC44 is the version to look at when you want a heavier-duty rigid tie corner with a corrosion-resistant finish. It is not flashy hardware. It is the kind of connector you buy because you want the corner done right the first time and you do not want to come back later to tighten a loose joint.
Built for Reinforced Wood Corners
This style of rigid tie corner makes a lot of sense on benches, utility furniture, and framed shop projects where the corners take constant side load and vibration.
- Designed for wood-to-wood fastening at corner connections
- Ideal for tying two horizontal members into one vertical post
Cleaner Than Angled Fastening
The advantage here is consistency. Instead of trying to drive fasteners at matching angles and hoping the corner stays true, the formed connector gives you a defined fastening path and a more controlled result.
- Simpson Strong-Tie describes it as easier and stronger than angled fastening
- Helps support rigid corner assemblies in wood construction projects
Heavy-Gauge Steel Where It Counts
Not every connector in the RTC family uses the same material thickness. The RTC44 stands out because it is the 14-gauge version, which is the one to reach for when you want a stiffer, more substantial corner connector.
- RTC44 is specified as 14 gauge
- Galvanized steel construction with ZMAX corrosion-resistant finish
Key Specifications
| Connector Type | Rigid tie corner |
|---|---|
| Application | Fastening wood-to-wood corner connections |
| Material | Steel |
| Gauge | 14 gauge |
| Finish | ZMAX galvanized |
| Post Size | 4x |
| Compatible Fasteners | Simpson Strong-Tie Strong-Drive SD screws |
| Primary Use | Connects two horizontal members to one vertical member |
Compatibility
Built For
Pro Tip
If you are using the RTC44 on a project built from treated lumber or in a damp shop environment, match the fastener corrosion resistance to the connector finish and use all specified fasteners. With structural connectors, the steel and the fasteners work as one system.
Tool Nut's Take
Simpson Strong-Tie RTC44 RTC 14-Gauge ZMAX Galvanized Rigid Tie Corner for Solid 4x Corner Builds
This is the kind of connector you buy when you are done messing around with angled screws and want a corner that feels locked in.
- Who it's for: Builders, woodworkers, and serious DIY users putting together benches, shelving, tables, and other wood structures built around 4x corner posts.
- Why it stands out: The RTC44 gets the heavier 14-gauge construction, and that is the detail that separates it from lighter corner hardware when rigidity matters.
- Worth knowing: This connector is only part of the assembly. Use the specified fasteners and plan the connection as a system if you want the published performance to mean anything on the job.
Common Questions
- What is the RTC44 used for? It is used for corner applications that connect two horizontal wood members to a vertical wood post.
- What is the RTC44 made from? RTC44 is made from steel and is specified as a 14-gauge connector.
- Does it work with Simpson Strong-Drive SD screws? Yes. Simpson Strong-Tie lists the RTC44 as compatible with Strong-Drive SD connector screws.
- What finish does this connector use? This version uses a ZMAX galvanized finish for corrosion resistance.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


