Simpson Strong-Tie Strong-Drive SDWS TIMBER Screw (Exterior Grade), 0.220-in. x 5-in. T40, Tan (SDWS22500DB-RP1)
Simpson Strong-Tie Strong-Drive SDWS TIMBER Screw (Exterior Grade), 0.220-in. x 5-in. T40, Tan (SDWS22500DB-RP1)
Out of Stock - Available to Order - Usually ships in 3-5 days
Product Details
Product Details
Key Features
Overview
The Simpson Strong-Tie SDWS22500DB-RP1 Strong-Drive SDWS TIMBER Screw (Exterior Grade) is a 5 inch structural wood screw built for exterior wood-to-wood fastening. This is a structural wood screw designed for fastening wood members in framing, ledger, and outdoor timber connections. Model Number: SDWS22500DB-RP1. If you want a cleaner, faster alternative to through-bolting or traditional lag screws, this is the kind of fastener that saves steps without giving up holding power.
For this specific version, you are getting a single tan screw with a 0.220 inch shank diameter, 5 inch overall length, 3 inch thread length, and a 0.760 inch washer head. That combination matters because the long body helps bridge thicker wood members, while the large head spreads clamping force over more surface area. In real work, that means better pull-through resistance and a more secure connection in wood-to-wood applications.
The big jobsite advantage here is installation speed. Simpson Strong-Tie uses a SawTooth point that starts fast, lowers driving resistance, and removes the need for predrilling in most applications. That is a real time saver when you are building fences, pergolas, planters, ledgers, or other exterior framing assemblies. Less prep means faster layout-to-install time, especially when you are driving repeated fasteners into pressure-treated lumber.
The thread design is built for bite. Simpson calls it a bold thread, and that is exactly what you want in a timber screw meant for structural fastening. It grabs aggressively in wood fibers and helps pull members together as the screw seats. Pair that with the washer head and underhead nibs, and you get a screw that drives flush with less splintering at the surface. That is not just cosmetic. It helps the finished connection sit cleaner and reduces the chance of proud heads getting in the way of trim, rails, or adjacent members.
Drive engagement is another place this fastener earns its keep. The T40 six-lobe drive gives you more positive bit contact than a basic slot or Phillips-style recess, which helps limit cam-out under load. On the job that translates to fewer stripped heads, better control when driving long screws, and less chewed-up hardware when you are working overhead or at awkward angles. Simpson also identifies size on the screw head, which is handy when loose fasteners start collecting in a pouch or bucket.
Because this is the exterior-grade SDWS version, coating matters. The double-barrier coating is intended to provide corrosion resistance equivalent to hot-dip galvanization and is suitable for certain exterior and preservative-treated wood applications as described in Simpson Strong-Tie's evaluation report. For outdoor construction, that matters a lot. A structural fastener is only as good as its ability to hold up in the environment where it is installed.
This screw is also positioned as a high-strength alternative to through-bolting and traditional lag screws, which is why it is popular with both contractors and serious DIY users. You still need to use the right fastener for the connection design, but for many common wood framing and exterior timber tasks, a structural screw like this can cut installation time, reduce tool changes, and give a cleaner finished result than older fastening methods.
Who should buy it? Carpenters, deck builders, fence installers, remodelers, and anyone doing exterior wood construction where a structural wood screw makes more sense than a lag. If you need one replacement fastener, a sample, or a single piece for a repair, the Simpson Strong-Tie SDWS22500DB-RP1 Strong-Drive SDWS TIMBER Screw (Exterior Grade) is the right single-pack version. If you are building a full project, you will probably want one of the larger pack counts from the same SDWS timber screw line.
Drives Faster Into Wood
This screw is built to get moving quickly in framing lumber and structural wood members without wasting time on unnecessary prep.
- SawTooth point helps the screw start fast and reduces installation torque
- Predrilling is eliminated in most applications according to Simpson Strong-Tie
Pulls Members Tight
When you are fastening heavy wood parts together, the head and thread design matter just as much as length. This one is made to clamp and hold.
- Bold thread design provides strong holding power in wood-to-wood connections
- Large 0.760 inch washer head increases bearing area at the surface
Built For Outdoor Projects
This is not an interior drywall screw pretending to be structural hardware. It is made for real exterior woodwork where corrosion resistance and dependable drive performance matter.
- Double-barrier coating is suitable for certain exterior and preservative-treated wood applications
- Underhead nibs help the head seat flush with reduced splintering
Easy Bit Engagement
Long structural screws are a lot less frustrating when the bit stays planted. The drive recess on this one is designed for that.
- T40 six-lobe drive gives positive engagement and helps improve bit life
- Size identification on the screw head makes sorting hardware easier on site
What's in the Box
- (1) Simpson Strong-Tie SDWS22500DB-RP1 Strong-Drive SDWS TIMBER Screw, 0.220 in x 5 in, Tan
Driver bit is not included.
Key Specifications
| Application | Wood-to-Wood |
|---|---|
| Length (in.) | 5 in. |
| Shank Diameter (in.) | 0.220 in. |
| Head Diameter (in.) | 0.760 in. |
| Drive Type | T40 6-Lobe |
| Head Type | Washer Head |
| Thread Length (in.) | 3 in. |
| Point Type | SawTooth Point |
| Coating | Double-Barrier Coating |
| Material | Steel |
| Color | Tan |
| Package Quantity | 1 |
Compatibility
Built For
Pro Tip
Use a low-speed 1/2 inch drill with a fresh T40 bit when driving this 5 inch structural screw. You will get better control, less heat, and fewer stripped recesses than if you try to hammer it in with a high-speed driver.
Tool Nut's Take
Simpson Strong-Tie SDWS22500DB-RP1 Strong-Drive SDWS TIMBER Screw That Saves You Steps
This is the kind of structural screw you grab when you want lag-screw strength without the drag of a slower install.
- Who it's for: Contractors, deck and fence builders, remodelers, and serious DIY users doing exterior wood fastening and timber connections.
- Why it stands out: The SawTooth point starts fast, the T40 drive stays engaged, and the washer head gives this screw real structural fastening credibility.
- Worth knowing: This SKU is a single screw, not a box, and the driver bit is not included.
Common Questions
- What material is this screw designed to fasten? It is designed for wood-to-wood fastening.
- Does this screw usually require predrilling? Simpson Strong-Tie states that the SawTooth point eliminates the need for predrilling in most applications.
- What bit does it use? It uses a T40 six-lobe drive.
- Is this suitable for exterior use? Yes. The double-barrier coating is intended for certain exterior and preservative-treated wood applications as described in the evaluation report.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

