Simpson Strong-Tie Marine Screw, Pan Head, #10 x 1-in. #2 Phillips Drive, Type 316, 1000-Pack (T10J100PXM)
Simpson Strong-Tie Marine Screw, Pan Head, #10 x 1-in. #2 Phillips Drive, Type 316, 1000-Pack (T10J100PXM)
Out of Stock - Available to Order - Usually ships in 3-5 days
Product Details
Product Details
Key Features
Overview
The Simpson Strong-Tie T10J100PXM Marine Screw, Pan Head, #10 x 1 in. Phillips #2 is a corrosion-resistant specialty fastener built for marine assembly and trim work. Model Number T10J100PXM. This is a marine screw designed for fastening wood-to-wood in fiberglass, plywood, and wood-substitute materials that will be exposed to harsh marine or chemically caustic conditions.
What makes this screw different from a basic stainless fastener is the thread design. Simpson Strong-Tie uses a high-low thread form with serrated indentations that cut into dense material more easily and more quickly. In practical terms, that means easier starts and less wasted time when you are fastening into tough substrates that do not forgive a weak or sloppy fastener.
The sharp point also matters. On assembly work, especially when you are installing trim, rub rail, or molding, a screw that starts cleanly helps you keep the job moving and reduces the tendency to skate before it bites. That is a small detail on paper, but it is a big deal when you are driving a lot of screws in finish-sensitive material.
This specific T10J100PXM version is a #10 x 1 in. pan head screw with a Phillips #2 drive. The pan head gives you a broad, clean bearing surface for applications where a countersunk head is not the goal. The 1 in. length and #10 size put it in a useful middle ground for many marine fastening jobs that need solid hold without stepping up to a bulkier fastener.
The material is Type 316 stainless steel, which is the spec most buyers are looking for when the hardware will see wet, salty, or chemically aggressive conditions. That is why these screws are commonly selected for boat-related applications instead of general-purpose wood screws. The point is not just that they are stainless. It is that they are built for environments that are rough on ordinary fasteners.
Simpson Strong-Tie also calls out where this screw belongs: fastening securely in fiberglass, plywood, and wood-substitute materials, with ideal use in applying trim, rub rail, and molding to fiberglass boat hulls. That makes the fit pretty clear. If you are doing marine repair, boat trim installation, or similar corrosion-prone fastening work, this is the right kind of screw to be looking at.
This pack includes 1,000 screws, so it is aimed more at production work, shop use, or anyone who goes through marine fasteners regularly. If you just need a handful for a one-off repair, this may be more quantity than you need. If you do repeat marine fastening work, buying the bulk pack makes a lot more sense.
Made for Harsh Marine Conditions
Marine fasteners need to do more than hold. They need to keep holding when the job lives around moisture, salt, and harsh exposure. That is where this screw earns its keep.
- Type 316 stainless steel for marine and chemically caustic environments
- Designed for fiberglass, plywood, and wood-substitute materials
- Ideal for trim, rub rail, and molding on fiberglass boat hulls
Starts Fast and Cuts Cleanly
The thread and point geometry are built to reduce the usual fight you get with dense materials. That helps on repetitive assembly work where clean starts and consistent drive feel matter.
- High-low serrated threads cut quickly through high-density material
- Extra-sharp point speeds screw starts during assembly
- Phillips #2 drive matches common installation bits for #10 size
Right Size for Repeated Trim and Assembly Work
This exact version gives you a useful balance of holding power, head coverage, and manageable length for many marine fastening jobs. It is also packed for users who need volume, not just a few pieces.
- #10 screw size with 1 in. length
- Pan head style for non-countersunk fastening applications
- Bulk packaging quantity of 1,000 screws
What's in the Box
- (1,000) Simpson Strong-Tie T10J100PXM Marine Screws
Key Specifications
| Fastener Type | Hand-Drive Screw |
|---|---|
| Application | Fastening Wood-to-Wood |
| Material | Type 316 Stainless Steel |
| Screw Size | #10 |
| Length (in.) | 1 in. |
| Drive Type | Phillips #2 |
| Head Type | Pan Head |
| Thread Type | High/Low Serrated Threads |
| Point Type | Sharp Point |
| Head Diameter (in.) | 0.365 in. |
| Shank Diameter (in.) | 0.190 in. |
| Pack Quantity | 1000 |
Built For
Tool Nut's Take
Simpson Strong-Tie T10J100PXM Marine Screw, Pan Head, #10 x 1 in. Phillips #2
If you are fastening around boats, fiberglass, or other nasty exposure conditions, this is the kind of screw you buy once and stop worrying about.
- Who it's for: Boatbuilders, marine repair shops, and installers handling trim, rub rail, molding, and wood-to-wood marine fastening.
- Why it stands out: Type 316 stainless steel plus serrated high-low threads and a sharp point is a smart combination for dense material and rough environments.
- Worth knowing: This is a 1,000-pack, so it is best for regular use or shop stock, not a tiny one-time repair.
Common Questions
- What materials is this screw designed for? It is designed to fasten securely in fiberglass, plywood, and wood-substitute materials.
- What kind of environment is this screw meant for? It is intended for harsh marine or chemically caustic conditions where corrosion resistance matters.
- What drive type does the T10J100PXM use? This #10 model uses a Phillips #2 drive.
- Is this a countersinking screw? No. This model uses a pan head, which is meant for applications where the head remains above the surface rather than sitting flush like a countersunk head.

Join over 1/2 million customers who have trusted Tool Nut and given us a 4.8+ star rating on Google. Celebrating over 30 years of building together, since 1994.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.


